Track market-moving stories before they get noisy

MINNETONKA, Minn. & REHOVOT, Israel--(BUSINESS WIRE)--Stratasys Ltd. (Nasdaq: SSYS) will release financial results for the second quarter ended June 30, 2026, on Thursday, August 13, 2026. The Company plans to hold the conference call to discuss its second quarter 2026 financial results on Thursday, August 13, 2026, at 8:30 a.m. (ET). The investor conference call will be available via live webcast on the Stratasys Web site at investors.stratasys.com, or directly at the following web address: ht.

An updated edition of the May 7, 2026 article.

3D Printing, also known as additive manufacturing, has revolutionized the way products are designed, developed and manufactured. Since its emergence in the 1980s, the technology has evolved from a niche prototyping tool into a technologically advanced manufacturing process that converts digital designs into physical objects layer by layer, enabling high precision, customization and faster production cycles.

3D printing is now being applied across a wide range of end markets, including medical prosthetics, aerospace components, architectural models and consumer products. Companies like Xometry (XMTR - Free Report) , Proto Labs (PRLB - Free Report) and Stratasys (SSYS - Free Report) remain key players in this space.

Unlike traditional subtractive manufacturing, additive manufacturing reduces material waste and enables production of complex structures that were once difficult, costly or even impossible to produce. Localized production helps shorten supply chains and lower transportation costs, while on-demand manufacturing reduces the need for large inventories. This is especially useful for industries with seasonal demand or urgent replacement-part needs. Companies are thus increasingly turning to 3D printing for rapid prototyping and on-demand manufacturing driven by its cost advantages and sustainability benefits. 

Adoption is gaining across healthcare, aerospace, automotive and consumer goods. In aerospace, the technology is used to produce lightweight yet durable aircraft and spacecraft components. The automotive industry relies on 3D printing for prototyping, tooling and customized parts. In healthcare, it enables the production of patient-specific medical devices and prosthetics, and ongoing progress in tissue and organ printing could significantly influence the future of modern medicine.

North America remains the leading market, accounting for more than 35% of global share due to strong research investments, supportive government policies and advanced manufacturing capabilities. Asia-Pacific countries, particularly China and India, are rapidly expanding adoption to strengthen their industrial competitiveness.

We believe 3D Printing presents compelling growth opportunities for investors, supported by an expanding addressable market and a strong innovation pipeline.

Our 3D Printing Screen makes it easy to identify high-potential stocks in this space. Currently, stocks like DuPont de Nemours (DD - Free Report) , Proto Labs, AMETEK (AME - Free Report) and ATI Inc. (ATI - Free Report) look lucrative. 

Ready to uncover more transformative thematic investment ideas? Explore 37 cutting-edge investment themes with Zacks Thematic Investing Screens and discover your next big opportunity.

4 Must-Have 3D Printing Stocks for Your PortfolioDuPont’s association with 3D printing and additive manufacturing began in the late 1980s, when it developed the Somos solid-imaging business, one of the early material and equipment platforms linked to stereolithography, a foundational 3D-printing process. Although DuPont divested the Somos business in 1999, its early participation positioned it as a notable innovator in the formative years of the additive manufacturing industry. Through the acquisition of Spectrum Plastics Group in 2023, DuPont strengthened its position in complex medical components and advanced manufacturing, including medical additive manufacturing capabilities. Spectrum's strategic focus on key, fast-growing therapeutics areas such as structural heart, electrophysiology, surgical robotics and cardiovascular complemented DuPont's existing offerings for biopharma and pharma processing, medical devices and packaging, including DuPont's Liveo silicone solutions and Tyvek Medical Packaging. Spectrum is currently reported in DuPont’s Healthcare Technologies business within the Healthcare & Water Technologies segment. 

Spectrum has developed medical additive manufacturing technologies that utilize proprietary processes and medical-grade materials to create complex, high-resolution components. Its primary additive manufacturing methods include Projection Micro Stereolithography Technology, SLA (Stereolithography), PTTP (Proprietary Thermoplastic Tubing Printing), FDM (Fused Deposition Modeling), SLS (Selective Laser Sintering), Silicone 3D Printing and Metal SLM (Selective Laser Melting). Its manufacturing capabilities support a broad range of medical-grade thermoplastics. Going forward, DuPont can benefit from the rising demand for customized medical devices, lightweight industrial components, rapid design iteration and high-performance materials that allow additive manufacturing to shift from prototyping into regulated, end-use production.

DuPont currently sports a Zacks Rank #1 (Strong Buy).  You can see the complete list of today’s Zacks #1 Rank stocks here.

Proto Labs is widely recognized as the world’s fastest digital manufacturing platform for rapid prototypes and on-demand production parts. Since its inception, it has manufactured more than 700 million parts, catering to more than 300,000 customers. 

Initially focused on prototypes and relatively simple components, the company gradually expanded its capabilities to include more complex parts as well as full-scale production. Over time, it broadened the scope of its offerings by increasing the range of sizes and materials available. Proto Labs also strengthened its portfolio through strategic acquisitions, including FineLine in 2014 to introduce 3D printing, Alphaform in October 2015 to expand 3D printing services in Europe and RAPID in 2017 to add sheet-metal manufacturing. Through the acquisition of 3D Hubs, Inc., which was rebranded to Protolabs Network in 2021, it provides customers access to a global network of premium manufacturing partners.

The company unveiled ProDesk in February 2026, an Artificial Intelligence (AI) enabled manufacturing platform to accelerate projects from prototyping to production. It features AI-driven manufacturability analysis across injection molding, CNC machining and 3D printing services for instant feedback on parts before they enter production. The platform also allows users to customize quotes based on materials, finishes, secondary operations and lead-time requirements. Through this platform, the company promises an industry-leading online experience that will accelerate product development timelines. PRLB currently sports a Zacks Rank of 1.

AMETEK, through its Specialty Metal Products (SMP) unit, is a leading producer of high-performance metal powders designed for additive manufacturing. It offers a range of alloys and size distributions specific to different additive manufacturing processes, including Laser Powder Bed, Binder Jet and Cold Spray and machines. AME’s most common additive manufacturing powder materials include stainless steel 316L (including A240 grade), Stainless steel 304L and Stainless steel 17-4PH. It also offers specialty austenitic and ferritic stainless steels, as well as a selection of high-quality nickel and cobalt alloy powders that are designed specifically for 3D printing applications.

Backed by more than five decades of expertise, the combination of scale, precision and material science enables the company to deliver reliable, high-quality powders that support consistent performance and cost efficiency in additive manufacturing.

In July 2025, AME acquired Faro Technologies, a leading provider of 3D measurement and imaging solutions. Faro’s offerings included portable measurement arms, laser scanners and trackers, software solutions and comprehensive service offerings serving a diverse range of end markets. This was AMETEK’s largest addition in precision scanning since the acquisition of Creaform in 2013.  Creaform is a well-known developer and manufacturer of innovative portable 3D measurement technologies and a provider of 3D engineering services. In October 2024, the company complemented Creaform’s business capabilities with the acquisition of Virtek Vision International, a leading provider of advanced laser-based projection and inspection systems. AME currently carries a Zacks Rank #2 (Buy).

ATI provides a full range of capabilities throughout the additive supply chain, from metal powder and material science to the finished part. ATI Additive Manufacturing is one of the select providers with expertise in both Electron Beam Melting and Powder Bed Fusion, designed for highly demanding and precision-critical performance environments. ATI Additive Manufacturing has been at the forefront of Aerospace additive manufacturing since 2014.

Given its extensive powder metals offering, ATI Additive can quickly respond to customers' needs for their additive part demands. Leveraging ATI’s metallurgical leadership, it can also develop new alloys for additive manufacturing on request or address industry challenges. The company continues to increase its production capacity for advanced metallic powders for use in next-generation aerospace products, including additive manufacturing applications.

ATI has commissioned a state-of-the-art facility for additive manufacturing products, bringing online the most advanced large-format, metal additive manufacturing capabilities in the industry. The facility combines design, printing, heat treating, machining and inspection capabilities under one roof. From design to finished product, the company has created a one-stop solution center to address challenges in high-performance markets like aerospace, defense and space. ATI currently carries a Zacks Rank of 2.

-

Stratasys Direct™ chosen based upon its proven role in defense manufacturing, with a trusted track record across thousands of military systems worldwide.

U.S. defense additive manufacturing funding surges toward $3.3 billion as adoption expands across sustainment and modernization

MINNETONKA, Minn. & REHOVOT, Israel--(BUSINESS WIRE)--Stratasys Ltd. (NASDAQ: SSYS) today announced that its parts-on-demand business, Stratasys Direct™, has been selected to take part in the U.S. Department of War’s (DoW) Joint Additive Manufacturing Acceptability (JAMA) IV Pilot Parts Program, a multimillion-dollar initiative to accelerate qualification and deployment of 3D-printed parts across military platforms and systems.

As a Program of Record for the U.S. Air Force and Naval Air Systems Command (NAVAIR), Stratasys continues to expand its role in advanced manufacturing across aerospace and defense production environments, building on the successful deployment of thousands of systems worldwide. Unlike aspirational additive manufacturing initiatives in defense, Stratasys Direct, the contract manufacturing division of Stratasys, delivers qualified production-scale parts to defense organizations for operational use across active platforms.

Demand for additive manufacturing in defense continues to grow, driven by mission-critical requirements for accuracy, scalability, and resilience. DoW budget programs increasingly reference additive manufacturing, with funding rising 83% to $3.3 billion in fiscal year 2026 compared to fiscal year 2025. Industry analysts expect continued growth through the end of the decade as military organizations expand digital manufacturing for sustainment, supply chain resilience, and modernization.

Stratasys solutions also deliver measurable operational benefits across military programs. For example, the U.S. Air Force uses Stratasys throughout its C‑17 fleet to produce microvanes that improve aerodynamic efficiency, helping save an estimated $14 million in annual fuel costs, as well as 3D‑printed replacement components that meaningfully reduce lead times.

“In 2025, Stratasys saw double-digit annual revenue growth from aerospace and defense, demonstrating that additive manufacturing is becoming a key capability for defense sustainment and supply chain resilience,” said Foster Ferguson, Vice President, Industrial Business Unit, Stratasys. “Stratasys Direct already ships over 100,000 parts annually to the defense industry, and programs like JAMA will accelerate qualification of parts so organizations can deploy them faster across operational platforms.”

Ferguson continued: “Through Stratasys Direct, we combine Stratasys technology with production-scale additive manufacturing services and deep engineering expertise to help defense organizations validate and produce components that keep mission-critical systems operational.”

About Stratasys Direct

Stratasys Direct, the contract manufacturing division of Stratasys, provides additive manufacturing solutions for companies in highly regulated industries. With three manufacturing facilities in North America, the company offers seven industrial 3D printing technologies, along with engineering, finishing, and post-processing capabilities that support applications from rapid prototyping through production. Operating under certified quality systems including AS9100 and ISO 9001, CMMC compliance, and supporting ITAR requirements, Stratasys Direct Manufacturing brings decades of experience serving aerospace, defense, medical, and industrial customers.

About Stratasys

Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries including aerospace, automotive, consumer products, and healthcare. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage of the product value chain. The world’s leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.

To learn more about Stratasys, visit www.stratasys.com, the Stratasys blog, X/Twitter, LinkedIn, or Facebook. Stratasys reserves the right to utilize any of the foregoing social media platforms, including Stratasys’ websites, to share material, non-public information pursuant to the SEC’s Regulation FD. To the extent necessary and mandated by applicable law, Stratasys will also include such information in its public disclosure filings.

More News From Stratasys Ltd.

Back to Newsroom

New materials across FDM®, PolyJet™, P3™ DLP, and SLA, combined with GrabCAD® enhancements improve the accessibility of AM across business functions for faster, more accurate, and scalable production workflows

MINNETONKA, Minn. & REHOVOT, Israel--(BUSINESS WIRE)--Stratasys Ltd. (NASDAQ: SSYS) announced today that it has expanded its portfolio of additive manufacturing solutions across multiple industries with the introduction of new software and materials that expand applications of existing systems and improve ease of use for customers. New materials include: ULTEM™ 1010 filament for the F3300® printer, and PolyJet ToughONE™ White for Stratasys J3/J5™ printers, along with a new Measurement-Based Warped Modeling software addition to GrabCAD Print Pro™.

“These innovations are designed to solve real challenges manufacturers face when adopting or scaling additive manufacturing,” said Rich Garrity, Chief Business Unit Officer, Stratasys. “We are committed to continuous investment and development across our portfolio, working closely with customers to reduce barriers to adoption and unlock the incredible value that additive manufacturing can provide throughout the whole production workflow.”

Expanding ULTEM™ resin offerings for industrial growth

ULTEM™ 1010 resin is now available as filament for the F3300® printer. This addition enables the production of high-temperature, aerospace-grade parts with excellent resistance to heat and the lowest coefficient of thermal expansion in the FDM® technology portfolio. Optimized for composite tooling, ULTEM™ 1010 resin allows fixtures and tools to maintain precision and reliability in demanding environments. Paired with the F3300® printer's faster print speeds and integrated material drying, manufacturers can now produce high-performance parts while significantly reducing cost per component.

In addition, ULTEM™ 1010 filament is planned to be available this summer in larger spool sizes for extended production runs through the Fortus FDC™ filament dryer. Compatible with the F900® and Fortus® 450mc™ Gen III printers, the Fortus FDC dryer supports longer, uninterrupted builds with integrated material drying, enabling manufacturers to produce high-temperature industrial components more efficiently and with greater consistency.

Photocurable Materials Built for Real-World Applications

P3™ Deflect™ 110 resin for Origin printers makes additive manufacturing a valid option for production parts exposed to elevated temperatures and mechanical loads, like automotive connectors, brackets, jigs, fixtures, and other demanding engineering applications.

Loctite® 3D IND3785 Low Migration for Origin® printers addresses the needs of FDA- and EU-compliant small-batch production in food and pharmaceutical environments. It delivers injection-molding-quality surface finish and accuracy with the flexibility of additive manufacturing.

PolyJet ToughONE White on J3 and J5 systems enables teams to create durable prototypes that withstand snapping, flexing, and repeated testing. With prototypes that behave more like finished products, design teams can accelerate iteration and validation.

PolyJet ToughONE Black adds strong visual contrast with the same toughness and dimensional stability, supporting functional demonstrations, application testing, and high-impact design reviews.

Measurement-Based Warped Adapted Modeling in GrabCAD Print Pro™ brings precision to Origin® P3™ platform

Measurement-Based WAM™ Warped Adaptive Modeling integrated into GrabCAD Print Pro will use measured dimension data to automatically correct warping while providing precise additive production. Complex parts such as electrical connectors, precision jigs, and industrial fixtures can be produced with accuracy and consistency on the Origin® DLP platform using P3™ Programmable PhotoPolymerization technology, avoiding multiple iterations.

High-Detail SLA Prototypes

A new addition to the SLA material WaterShed family, Somos® WaterShed® White delivers durable, moisture-resistant SLA performance for automotive, aerospace, and industrial prototypes. Its smooth surface finish and opaque white appearance make it well suited for detailed models that must withstand functional testing. Somos Watershed White is validated to run on all Neo® printers, including the large-format Neo800+™.

Attendees of the upcoming RAPID + TCT Conference (April 14-16) can receive demonstrations of software and hardware, and learn more about these new materials at the Stratasys booth, #1601.

About Stratasys

Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries including aerospace, automotive, consumer products, and healthcare. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage of the product value chain. The world’s leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.

To learn more about Stratasys, visit www.stratasys.com, the Stratasys blog, X/Twitter, LinkedIn, or Facebook. Stratasys reserves the right to utilize any of the foregoing social media platforms, including Stratasys’ websites, to share material, non-public information pursuant to the SEC’s Regulation FD. To the extent necessary and mandated by applicable law, Stratasys will also include such information in its public disclosure filings.

Stratasys, J850, PolyJet, PolyJet ToughONE, P3, Origin, GrabCAD, GrabCAD Print, GrabCAD Print Pro and SAF are trademarks or registered trademarks of Stratasys Ltd. and/or its affiliates.

Stratasys, FDM, PolyJet, P3, GrabCAD, F3300, J3, J5, PolyJet ToughONE, GrabCAD Print Pro, Fortus, Fortus FDC, F900, Fortus 450mc, Origin, Deflect, Somos, WaterShed, Neo and Neo800+ are trademarks or registered trademarks of Stratasys Ltd. and/or its affiliates. 1010 and ULTEM™ trademarks are used under license from SABIC, its affiliate or subsidiary.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Those forward-looking statements are based on current information that is, by its nature, subject to potential change, due to risks and uncertainties faced by the Company, including those risks described in Item 3.D “Key Information - Risk Factors” of Stratasys’ annual report on Form 20-F for the year ended December 31, 2025, which Stratasys filed with the SEC on March 5, 2026, and in other reports and documents that Stratasys files with or furnishes to the SEC from time to time, which are designed to advise interested parties of the risks and factors that may affect Stratasys’ business, financial condition, results of operations and prospects. Any forward-looking statements made in this press release are made as of the date hereof, and Stratasys undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

More News From Stratasys Ltd.

New tools, materials, and platform updates make additive manufacturing more accessible, faster, easier, and more reliable from the design lab to the factory floor

MINNETONKA, Minn. & REHOVOT, Israel--(BUSINESS WIRE)--Stratasys Ltd. (NASDAQ: SSYS) today unveiled a slate of new application-driven software capabilities, materials, and platform enhancements designed to empower manufacturers to push additive manufacturing beyond concept models and into production parts faster than ever. Stratasys will enable organizations to move the production of more parts and tools from traditional methods into additive workflows, by streamlining design and ease of use, improving reliability, and expanding materials and platform capabilities. This approach will dramatically increase speed and performance while reducing costs.

“Manufacturers are seeking more applications for additive manufacturing, and that’s exactly what these innovations are designed to provide,” said Rich Garrity, President, Chief Business Unit Officer. “Whether it’s designing tools faster, producing high-performance parts, or getting more accuracy out of production systems, we’re giving teams practical ways to put additive to work every day.”

Engineering-Focused PolyJet Performance with the J850™ Core

The J850™ Core printer expands the PolyJet™ technology lineup with a lower-cost system built for engineering teams focused on functional prototyping. It gives customers access to PolyJet performance and materials without paying for full-color capabilities. These advancements hit the sweet spot between capability and cost for teams that want speed and reliability at a more practical price point. The system is planned to be open for booking by the end of April.

This system is suited for producing enclosures, housings, jigs, fixtures, and other functional components. With support for rigid, flexible, transparent, and PolyJet ToughONE™ materials, along with a large build tray and high-speed print modes, the J850™ Core enables faster iteration and consistent, repeatable results.

“The J850™ Core printer is built for how PolyJet is used today by engineering teams that need to move fast and validate parts every day,” said Garrity. “It brings the performance and material capabilities customers expect, at a practical price point that supports the ability to scale across more teams and more applications.”

P3™ MED Silicone 25A Offers Biocompatible Patient-Specific Applications

Stratasys and Shin-Etsu are introducing P3™ MED Silicone 25A, the first biocompatible true silicone for 3D printing patient-specific medical devices and low-volume production parts, available exclusively on Origin® printers. Fully certified to ISO 10993 standards, the material delivers authentic silicone properties such as elasticity, durability, and resistance to heat, chemicals, and aging. This combination overcomes many challenges traditionally associated with 3D printing true silicone.

The material enables scalable production of anatomically precise devices like hearing aids, CPAP masks, orthotics, and prosthetics, eliminating costly tooling and reducing production cycle times. By combining Stratasys’ additive manufacturing expertise with Shin-Etsu’s silicone science, the P3 Silicone line provides high-quality, injection-molding-grade parts with tight precision and excellent surface finish, accelerating development and improving patient-specific outcomes.

“P3 MED Silicone 25A opens new possibilities for patient-specific devices and low-volume medical production,” said Erez Ben Zvi, Vice President, Healthcare, Stratasys. “Combining authentic silicone properties with biocompatibility on the Origin system provides manufacturers the ability to produce durable, high-precision parts without molds or tooling, making additive manufacturing more practical and cost-effective for healthcare applications.”

GrabCAD® Software + Additive App Suite Lowers Barriers to Faster, More Efficient Manufacturing

The new Additive App Suite, developed by Stratasys’ software partner trinckle, expects to launch later this summer with 10 apps, which will be available for demonstration at the upcoming RAPID+TCT 2026 Show. Stratasys and trinckle plan to expand the number of apps available to 15 apps by Formnext 2026 in November. Automated design apps for proven industrial applications such as Clamping Jaws, Shadow Boards, and Drill Guides will be embedded directly into GrabCAD Print™ and GrabCAD Print Pro™. This integration enhances the overall interoperability within a single workflow session – optimized for Stratasys systems – allowing manufacturers to move seamlessly from automated design to print-ready production. Flexible licensing models provide both individual and enterprise options, creating a low-friction path from trial to full-scale adoption.

The suite enables manufacturing engineers to generate production tooling, eliminating the design bottleneck without disrupting the engineering workflow. By embedding these apps directly into GrabCAD Print and GrabCAD Print Pro, Stratasys expands additive manufacturing adoption beyond specialized AM teams to engineering, quality, and operations, accelerating real production outcomes. The partnership with design automation specialist trinckle marks the first step in Stratasys’ broader platform vision for GrabCAD – connecting engineers, applications, and additive workflows within a single ecosystem.

“By transforming GrabCAD Print into a platform that guides engineers through automated, production-ready workflows, we’re making additive manufacturing faster and more accessible across the factory floor,” said Victor Gerdes, Vice President, Software, Stratasys. “The Additive App Suite allows teams to go from a production problem to a print-ready solution in minutes, not days, expanding the impact of AM beyond the lab.”

SAF™ PA12 – Powered by Evonik Delivers Cost-Efficient Industrial Production

By lowering barriers to industrial powder bed adoption, the new SAF ™ PA12 enables production-grade performance at a competitive price point. Customers can expand production applications confidently, benefiting from reduced material costs and faster print times while maintaining the quality and performance expected from a production-grade PA12 material.

Stratasys’ new SAF™ PA12 - Powered by Evonik, offers up to 14% lower total cost of ownership vs current SAF PA12 materials, providing customers a highly cost-efficient PA12 solution for industrial production without requiring additional licenses, hardware, or process changes. The material delivers strong, resilient, and dimensionally accurate parts with consistent build quality, supporting reliable, repeatable industrial manufacturing.

“The new SAF PA12 delivers production-grade performance for industrial additive manufacturing, with strong, resilient, and dimensionally accurate parts with consistent quality,” said Neil Hopkinson, Vice President, SAF Technology, Stratasys. “By combining reliability with lower operating costs, manufacturers can confidently scale production applications, streamline workflows, and expand the use of additive manufacturing across multiple parts and processes.”

Attendees of the upcoming RAPID + TCT Conference (April 14-16) can get demonstrations of software and hardware, and see these new materials at the Stratasys booth, #1601.

About Stratasys

Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries including aerospace, automotive, consumer products, and healthcare. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage of the product value chain. The world’s leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.

To learn more about Stratasys, visit www.stratasys.com, the Stratasys blog, X/Twitter, LinkedIn, or Facebook. Stratasys reserves the right to utilize any of the foregoing social media platforms, including Stratasys’ websites, to share material, non-public information pursuant to the SEC’s Regulation FD. To the extent necessary and mandated by applicable law, Stratasys will also include such information in its public disclosure filings.

Stratasys, J850, PolyJet, PolyJet ToughONE, P3, Origin, GrabCAD, GrabCAD Print, GrabCAD Print Pro and SAF are trademarks or registered trademarks of Stratasys Ltd. and/or its affiliates. trinckle is a trademark or registered trademark of trinckle 3D GmbH. Learn more at trinckle.com.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Those forward-looking statements are based on current information that is, by its nature, subject to potential change, due to risks and uncertainties faced by the Company, including those risks described in Item 3.D “Key Information - Risk Factors” of Stratasys’ annual report on Form 20-F for the year ended December 31, 2025, which Stratasys filed with the SEC on March 5, 2026, and in other reports and documents that Stratasys files with or furnishes to the SEC from time to time, which are designed to advise interested parties of the risks and factors that may affect Stratasys’ business, financial condition, results of operations and prospects. Any forward-looking statements made in this press release are made as of the date hereof, and Stratasys undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

More News From Stratasys Ltd.

-

MINNETONKA, Minn. & REHOVOT, Israel--(BUSINESS WIRE)--Stratasys Ltd. (Nasdaq: SSYS) will release financial results for the first quarter ended March 31, 2026, on Thursday, May 7, 2026. The Company plans to hold the conference call to discuss its first quarter 2026 financial results on Thursday, May 7, 2026, at 8:30 a.m. (ET).

The investor conference call will be available via live webcast on the Stratasys Web site at investors.stratasys.com, or directly at the following web address:

https://event.choruscall.com/mediaframe/webcast.html?webcastid=jBx4uZ5o

To participate by telephone, the U.S. toll-free number is 877-407-0619 and the international dial-in is +1-412-902-1012. Investors are advised to dial into the call at least ten minutes prior to the call to register. The webcast will be available for 6 months at investors.stratasys.com, or by accessing the above-provided web address.

Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries such as aerospace, automotive, consumer products and healthcare. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage in the product value chain. The world’s leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.

To learn more about Stratasys, visit www.stratasys.com, the Stratasys blog, X/Twitter, LinkedIn, or Facebook. Stratasys reserves the right to utilize any of the foregoing social media platforms, including the company’s websites, to share material, non-public information pursuant to the SEC’s Regulation FD. To the extent necessary and mandated by applicable law, Stratasys will also include such information in its public disclosure filings.

More News From Stratasys Ltd.

Back to Newsroom

MINNETONKA, Minn. & REHOVOT, Israel--(BUSINESS WIRE)--Stratasys Ltd. (Nasdaq: SSYS), (“Stratasys” or the “Company”), a leader in polymer 3D printing solutions, today announced its financial results for the first quarter ended March 31, 2026.

“Our first quarter results reflect the resilience of our operating model in a measured spending environment, demonstrated by positive adjusted EBITDA and operating cash flow," said Dr. Yoav Zeif, CEO of Stratasys. "Recurring revenue from consumables and customer support continued to provide stability, while Stratasys Direct delivered strong 23% organic growth year-over-year across a diverse range of industrial applications, led by drone customers. As we look forward, our current pipeline in high requirement applications, especially in defense, continues to build as we gain confidence in our ability to win prominent contracts in 2026 and beyond.”

Summary - First Quarter 2026 Financial Results Compared to First Quarter 2025:

Revenue of $132.7 million compared to $136.0 million. GAAP gross margin of 41.7%, compared to 44.3%. Non-GAAP gross margin of 46.3%, compared to 48.3%. GAAP operating loss of $26.5 million, compared to a GAAP operating loss of $12.4 million. Non-GAAP operating loss of $3.2 million, compared to non-GAAP operating income of $3.0 million. GAAP net loss of $23.8 million, or ($0.28) per diluted share, compared to a net loss of $13.1 million, or ($0.18) per diluted share. Non-GAAP net loss of $1.3 million, or ($0.01) per diluted share, compared to non-GAAP net income of $2.9 million, or $0.04 per diluted share. Adjusted EBITDA of $2.0 million, compared to $8.2 million. Cash provided by operating activities of $2.4 million, compared to $4.5 million in the prior year period. Financial Outlook:

The Company is reaffirming its outlook for 2026, as set forth below, which is based on current market conditions and assumes that the impacts of global inflationary pressures, relatively high interest rates, exchange rates, increased tariffs and other supply chain costs do not impede economic activity further.

Full year revenue growing to a range of $565 million to $575 million, improving sequentially through the year. Based on current logistics and materials costs, full year non-GAAP gross margins of 46.7% to 47.1%, including approximately $7 million of adverse impact from tariffs and foreign exchange rates relative to 2025. Full year non-GAAP operating expenses ranging from $260 million to $262 million, including approximately $10 million of adverse impact from changes in foreign exchange rates. Full year non-GAAP operating margins in a range of 0.7% to 1.5%. GAAP net loss of $83 million to $67 million, or ($0.95) to ($0.76) per diluted share. Non-GAAP net income of $8 million to $12.5 million, or $0.09 to $0.14 per diluted share. Adjusted EBITDA of $25 million to $30 million, with Adjusted EBITDA margin of 4.5% to 5.0%. Capital expenditures of $20 million to $25 million. Expects to generate positive operating cash flow subject to uncertainty related to foreign exchange rates and tariffs. Appropriate reconciliations between historical GAAP and non-GAAP financial measures, as well as between the GAAP and non-GAAP financial measures included in our financial outlook for 2026, are provided in the tables at the end of our press release and slide presentation, with itemized detail concerning the non-GAAP financial measures. We have not included, however, guidance for 2026 for GAAP gross margin or GAAP operating expenses, or a reconciliation of our guidance for 2026 for non-GAAP gross margins or non-GAAP operating expenses to the most directly comparable GAAP financial measures (i.e., GAAP gross margin or GAAP operating expenses, respectively), as the information needed to provide that GAAP guidance and that reconciliation is not available to us without unreasonable effort or with reasonable certainty from a quantitative perspective. We expect that the foregoing missing information related to our outlook on a GAAP basis for 2026 is likely to result in significant changes relative to our non-GAAP outlook in respect of the subject financial measures.

Stratasys Ltd. First Quarter 2026 Webcast and Conference Call Details

The Company plans to webcast its conference call to discuss its first quarter 2026 financial results on Thursday, May 7, 2026, at 8:30 a.m. (ET).

The investor conference call will be available via live webcast on the Stratasys Web site at investors.stratasys.com, or directly at the following web address:

https://event.choruscall.com/mediaframe/webcast.html?webcastid=jBx4uZ5o

To participate by telephone, the U.S. toll-free number is 877-407-0619 and the international dial-in is +1-412-902-1012. Investors are advised to dial into the call at least ten minutes prior to the call to register. The webcast will be available for six months at investors.stratasys.com, or by accessing the above-provided web address.

Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries such as aerospace, automotive, consumer products, healthcare, fashion and education. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage in the product value chain. The world’s leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.

To learn more about Stratasys, visit www.stratasys.com, the Stratasys blog, Twitter, LinkedIn, or Facebook. Stratasys reserves the right to utilize any of the foregoing social media platforms, including the Company’s websites, to share material, non-public information pursuant to the SEC’s Regulation FD. To the extent necessary and mandated by applicable law, Stratasys will also include such information in its public disclosure filings.

Stratasys is a registered trademark and the Stratasys signet is a trademark of Stratasys Ltd. and/or its subsidiaries or affiliates. All other trademarks are the property of their respective owners.

Cautionary Statement Regarding Forward-Looking Statements

The statements in this press release regarding Stratasys' strategy, and the statements regarding its projected future financial performance, including the financial guidance concerning its expected results for 2026 and beyond, are forward-looking statements reflecting management's current expectations and beliefs. These forward-looking statements are based on current information that is, by its nature, subject to rapid and even abrupt change. Due to risks and uncertainties associated with Stratasys' business, actual results could differ materially from those projected or implied by these forward-looking statements. These risks and uncertainties include, but are not limited to: the extent of our success at introducing new or improved products and solutions that gain market share; the extent of growth of the 3D printing market generally; the global macro-economic environment, including the impact of increased and/or reciprocal import tariffs that have been imposed by the U.S. and other countries, and of higher energy costs due to the U.S.-Iranian conflict; global trends involving inflation, interest rates, economic activity and currency exchange rates, and their impact on the additive manufacturing industry, our company and our customers, in particular; changes in our overall strategy, including as related to any restructuring activities and our capital expenditures; the impact of potential shifts in the prices or margins of the products that we sell or services that we provide, including due to a shift towards lower margin products or services; the impact of competition and new technologies; potential further charges against earnings that we could be required to take due to impairment of additional goodwill or other intangible assets; the extent of our success at successfully consummating and integrating into our existing business acquisitions or investments in new businesses, technologies, products or services, the potential adverse impact of global interruptions and delays involving freight carriers and other third parties on our supply chain and distribution network; global market, political and economic conditions, and in the countries in which we operate in particular; potential adverse effects of Israel’s wars against Iran and its sponsored terrorist organizations Hamas, Hezbollah, and, intermittently, the Houthi terrorist group in Yemen; costs and potential liability relating to litigation and regulatory proceedings; risks related to infringement of our intellectual property rights by others or infringement of others' intellectual property rights by us; the extent of our success at maintaining our liquidity and financing our operations and capital needs; the impact of tax regulations on our results of operations and financial condition; and those additional factors referred to in Item 3.D “Key Information - Risk Factors”, Item 4, “Information on the Company”, Item 5, “Operating and Financial Review and Prospects,” and all other parts of our Annual Report on Form 20-F for the year ended December 31, 2025, which we filed with the U.S. Securities and Exchange Commission, or SEC, on March 5, 2026 (the “2025 Annual Report”). Readers are urged to carefully review and consider the various disclosures made throughout our 2025 Annual Report and the Reports of Foreign Private Issuer on Form 6-K that attach Stratasys’ unaudited, condensed consolidated financial statements and its review of its results of operations and financial condition, for the quarterly periods throughout 2026, which have been or will be furnished to the SEC throughout 2026, and our other reports filed with or furnished to the SEC, which are designed to advise interested parties of the risks and factors that may affect our business, financial condition, results of operations and prospects. Any guidance provided, and other forward-looking statements made, in this press release are provided or made (as applicable) as of the date hereof, and Stratasys undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

Use of Non-GAAP Financial Measures

The non-GAAP data included herein, including, but not limited to, data for non-GAAP gross margins, non-GAAP operating loss, non-GAAP operating margins, non-GAAP net income, and Adjusted EBITDA, which non-GAAP data excludes certain items, as detailed in the reconciliation tables herein, are non-GAAP financial measures. Our management believes that these non-GAAP financial measures are useful information for investors and shareholders of our company in gauging our results of operations. Our management utilizes these non-GAAP measures to enable us to assess our financial results (i) on an ongoing basis after excluding mergers, acquisitions and divestments related expense or gains and reorganization-related charges or gains and legal provisions, (ii) excluding non-cash items such as share-based compensation expenses, acquired intangible assets amortization, including intangible assets amortization related to equity method investments, impairment of long-lived assets and goodwill, revaluation of our investments and the corresponding tax effect of those items, (iii) for certain non-GAAP measures, after eliminating the impact of changes attributable to currency exchange rate fluctuations, and (iv) after excluding changes in revenues solely attributable to divestitures of former subsidiary companies. The items eliminated as part of our calculation of our non-GAAP financial measures either do not reflect actual cash outlays that impact our liquidity and our financial condition or have a non-recurring impact on the statement of operations, as assessed by management. Our non-GAAP financial measures are presented to permit investors to more fully understand how management assesses our performance for internal planning and forecasting purposes. The limitations of using these non-GAAP financial measures as performance measures are that they provide a view of our results of operations without including all items indicated above during a period, which may not provide a comparable view of our performance to other companies in our industry. Investors and other readers should consider non-GAAP measures only as supplements to, not as substitutes for or as superior measures to, the measures of financial performance prepared in accordance with GAAP. Reconciliation between results, and between our outlook for 2026 (other than for gross margin and operating expenses, for which GAAP data is not available to us without unreasonable effort or with reasonable certainty), on a GAAP and non-GAAP basis is provided in the tables below.

Stratasys Ltd.   Consolidated Balance Sheets (U.S. $ in thousands, except share data)   March 31, 2026 December 31, 2025 ASSETS Current assets Cash and cash equivalents $

71,789

$

94,527

Short-term bank deposits 166,000

150,000

Accounts receivable, net of allowance for credit losses of $4,060 and $4,145 as of March 31, 2026 and December 31, 2025, respectively 157,077

160,478

Inventories 143,573

145,238

Prepaid expenses 7,739

5,500

Other current assets 27,454

26,241

  Total current assets 573,632

581,984

Non-current assets Property, plant and equipment, net 191,745

192,566

Goodwill 101,451

101,599

Other intangible assets, net 90,715

95,842

Operating lease right-of-use assets 25,454

25,417

Long-term investments 76,298

63,104

Other non-current assets 13,571

13,252

  Total non-current assets 499,234

491,780

  Total assets $

1,072,866

$

1,073,764

  LIABILITIES AND EQUITY Current liabilities Accounts payable $

50,856

$

43,021

Accrued expenses and other current liabilities 33,590

34,284

Accrued compensation and related benefits 37,712

31,304

Deferred revenues - short-term 51,402

47,835

Operating lease liabilities - short-term 7,141

6,597

  Total current liabilities 180,701

163,041

Non-current liabilities Deferred revenues - long-term 18,299

19,062

Deferred income taxes 503

312

Operating lease liabilities - long-term 19,541

19,903

Contingent consideration - long-term 5,437

5,353

Other non-current liabilities 22,779

23,193

  Total non-current liabilities 66,559

67,823

  Total liabilities $

247,260

$

230,864

  Contingencies (see note 12)   Equity Ordinary shares, NIS 0.01 nominal value, authorized 180,000 thousand shares; 87,080 thousand shares and 86,376 thousand shares issued at March 31, 2026 and December 31, 2025, respectively; 86,814 thousand shares and 86,110 thousand shares outstanding at March 31, 2026 and December 31, 2025, respectively $

244

$

242

Treasury shares at cost, 266 thousand shares at March 31, 2026 and December 31, 2025 (1,995

)

(1,995

)

Additional paid-in capital 3,280,627

3,275,344

Accumulated other comprehensive loss (4,951

)

(6,197

)

Accumulated deficit (2,448,319

)

(2,424,494

)

Total equity 825,606

842,900

  Total liabilities and equity $

1,072,866

$

1,073,764

  Stratasys Ltd.   Consolidated Statements of Operations (U.S. $ in thousands, except share data) Three Months Ended March 31, 2026

2025

  Revenues Products $

88,754

$

93,795

Services 43,943

42,251

132,697

136,046

Cost of revenues Products 46,554

47,268

Services 30,782

28,539

77,336

75,807

  Gross profit 55,361

60,239

  Operating expenses Research and development, net 19,151

18,792

Selling, general and administrative 62,742

53,851

81,893

72,643

  Operating loss (26,532

)

(12,404

)

  Financial income, net 2,732

1,473

  Loss before income taxes (23,800

)

(10,931

)

  Income tax expenses 25

455

  Share in losses of associated companies -

1,668

  Net loss $

(23,825

)

$

(13,054

)

  Net loss per ordinary share - basic and diluted $

(0.28

)

$

(0.18

)

  Weighted average ordinary shares outstanding - basic and diluted 86,357

71,967

  Stratasys Ltd.   Reconciliation of GAAP to Non-GAAP Results of Operations Three Months Ended March 31, 2026

Non-GAAP 2026

2025

Non-GAAP 2025

GAAP Adjustments Non-GAAP GAAP Adjustments Non-GAAP U.S. dollars and shares in thousands (except per share amounts) Gross profit (1) $

55,361

$

6,074

$

61,435

$

60,239

$

5,410

$

65,649

Operating income (loss) (1,2) (26,532

)

23,312

(3,220

)

(12,404

)

15,450

3,046

Net income (loss) (1,2,3) (23,825

)

22,548

(1,277

)

(13,054

)

15,932

2,878

Net income (loss) per diluted share (4) $

(0.28

)

$

0.27

$

(0.01

)

$

(0.18

)

$

0.22

$

0.04

  (1)

Acquired intangible assets amortization expenses 4,522

4,488

Non-cash share-based compensation expenses 661

708

Restructuring and other expenses 891

214

6,074

5,410

  (2)

Acquired intangible assets amortization expenses 1,155

940

Non-cash share-based compensation expenses 4,624

5,505

Restructuring and other related costs 995

1,132

Contingent consideration 335

645

Legal and other expenses 10,129

1,818

17,238

10,040

23,312

15,450

  (3)

Corresponding tax effect (442

)

84

Equity method related expenses -

841

Finance income (322

)

(443

)

$

22,548

$

15,932

  (4)

Weighted average number of ordinary shares outstanding - Diluted 86,357

86,357

71,967

72,625

  Stratasys Ltd.   Reconciliation of GAAP net loss to Adjusted EBITDA Three months ended March 31, 2026

2025

U.S. $ in thousands Net loss $

(23,825

)

$

(13,054

)

Financial income, net (2,732

)

(1,473

)

Income tax expenses 25

455

Share in losses of associated companies -

1,668

Depreciation expenses 5,731

5,124

Amortization expenses 5,686

5,428

Non-cash share-based compensation expenses 5,285

6,213

Contingent consideration 335

645

Legal and other expenses 10,361

1,818

Restructuring and other related costs 1,111

1,346

Adjusted EBITDA $

1,977

$

8,170

  Stratasys Ltd.   Reconciliation of GAAP Net Loss to Non-GAAP Net Income Forward Looking Guidance: Fiscal Year 2026 (U.S. $ in millions, except per share data) Low   High   GAAP net loss $(83) to $(67)   Adjustments Share-based compensation expenses $24 to $26 Intangible assets amortization expenses $23 to $25 Reorganization and other $31 to $37 Tax expenses related to Non-GAAP adjustments $2 to $3   Non-GAAP net income $8 to $13   GAAP loss per share $(0.95) to $(0.76)   Non-GAAP diluted earnings per share $0.09 to $0.14     Reconciliation of GAAP Net Loss to Adjusted EBITDA Forward Looking Guidance: Fiscal Year 2026 (U.S. $ in millions, except per share data) Low   High   GAAP net loss $(83) to $(67)   Adjustments Share-based compensation expenses $24 to $26 Intangible assets amortization expenses $23 to $25 Reorganization and other $31 to $37 Tax expenses related to Non-GAAP adjustments $2 to $3 Other non-operating income $(4) to $(4) Depreciation $21 to $21   Adjusted EBITDA $25 to $30     Stratasys Ltd.   Reconciliation of GAAP Operating Loss to Non-GAAP Operating Income Forward Looking Guidance: Fiscal Year 2026 (U.S. $ in millions, except per share data) Low   High   GAAP operating loss $(84) to $(69) GAAP operating margins (15)% to (12)%   Adjustments Share-based compensation expenses $24 to $26 Intangible assets amortization expenses $23 to $25 Reorganization and other $31 to $37   Non-GAAP operating profit $4 to $8.5 Non-GAAP operating margins 0.7 % to 1.5%   More News From Stratasys Ltd.

Stratasys Ltd. (SSYS) Q1 2026 Earnings Call Transcript

Key Takeaways SSYS posted a narrower-than-expected Q1 loss despite a 2.4% year-over-year revenue decline.Stratasys saw 23% organic growth in Direct services after divestments boosted services revenues.SSYS reiterated its 2026 revenues and earnings outlook despite tariff and foreign exchange uncertainty. Stratasys (SSYS - Free Report) reported a first-quarter 2026 non-GAAP loss of a penny per share, which beat the Zacks Consensus Estimate of a loss of 2 cents by 50%. However, the figure plunged 125% year over year.

Revenues decreased 2.4% year over year to $132.70 million. However, the top line beat the consensus mark of $132 million by 0.75%.

SSYS shares rose 3.9% at the time of writing this article. The stock has declined 7.4% in the year-to-date period compared with the Zacks Industrial Products sector’s return of 16%.

Stratasys’ Q1 Release in DetailSegment-wise, product revenues decreased 5.3% year over year to $88.8 million. System revenues fell 7.7% year over year to $28.8 million. Consumables revenues declined 4.2% year over year to $60 million. 

Services revenues increased 4% year over year to $43.9 million, driven by Stratasys Direct’s 23% organic year-over-year growth after divestments. Customer support revenues were $29.7 million, down 1% from the year-ago quarter. Management noted that recurring revenues from consumables and support continue to provide stability as customers remain cautious in capital equipment spending.

Stratasys’ non-GAAP gross margin contracted 200 basis points (bps) year over year to 46.3% from 48.3% in the same period last year. Management attributed the decline primarily to the impact of $2.4 million in incremental tariff expense, along with the effect of lower revenues.

Stratasys’ non-GAAP operating expenses in the first quarter of 2026 were $64.6 million, representing 48.7% of revenues compared with $62.6 million (46% of revenues) in the year-ago quarter. The increase was largely driven by foreign exchange, with management citing an approximately $3.1 million impact from the appreciation of the Israeli shekel against the U.S. dollar.

Adjusted EBITDA was $2.0 million compared with $8.2 million in the year-ago quarter. The adjusted EBITDA margin contracted 450 bps on a year-over-year basis to 1.5%. The non-GAAP operating loss was $3.2 million compared with an operating profit of $3 million in the year-over-year period.

Stratasys’ Balance Sheet & Cash Flow DetailsAs of March 31, 2026, Stratasys had $237.8 million in cash, cash equivalents and short-term deposits compared with $244.5 million as of Dec. 31.

The company emphasized that it remains debt-free, preserving flexibility to invest in technology and market development while evaluating inorganic opportunities aligned with its focus on high-requirement use cases.

In the first quarter of 2026, the company reported operating cash flow of $2.4 million compared with $15.1 million in the previous quarter, supported by working-capital discipline.

Stratasys Offers Positive 2026 OutlookFor 2026, Stratasys reiterated its outlook for revenues between $565 million and $575 million, implying sequential growth through the year. The company expects non-GAAP earnings of 9-14 cents per share.

Stratasys continues to forecast non-GAAP gross margin of 46.7-47.1% and non-GAAP operating margin of 0.7-1.5%. The company noted that its outlook remains subject to foreign exchange rate and tariff uncertainty.

Zacks Rank & Stocks to ConsiderABBNY sports a Zacks Rank #1 (Strong Buy), whereas Alamo Group and Enersys carry a Zacks Rank #2 (Buy) at present. You can see the complete list of today’s Zacks #1 Rank stocks here.

Long-term earnings growth rates for ABBNY, Alamo Group and Enersys are currently pegged at 17.25%, 16% and 15%, respectively.

May 27, 2026 06:30 ET  | Source: Nano Dimension

Accelerating Progress Toward Unlocking and Maximizing Long-Term Shareholder Value

Transaction Expected to Reduce Annualized Cash Burn by Approximately $15 Million

WALTHAM, Mass., May 27, 2026 (GLOBE NEWSWIRE) -- Nano Dimension Ltd. (Nasdaq: NNDM) (“Nano Dimension”, “Nano”, or the “Company”) today announced that it has entered into a definitive agreement to sell MarkForged, Inc. (“MarkForged”), a wholly owned subsidiary, to Stratasys Ltd. (NASDAQ: SSYS) (“Stratasys”) in an all-cash transaction valued at $42.5 million.

The transaction represents another major step in Nano Dimension’s previously announced three phase strategic plan, which is being executed in parallel, and further advances the Company’s Phase 3 progress toward maximizing long-term shareholder value. Phase 1 focuses on streamlining operations and reducing cash burn through efficiency initiatives and disciplined cost management. Phase 2 focuses on the monetization of product lines to simplify the business and strengthen the balance sheet. Phase 3 focuses on evaluating strategic alternatives to maximize long-term shareholder value and selecting the most compelling path forward.

The sale of MarkForged, Inc. is part of Phase 2 of our strategic plan. The transaction is expected to reduce annualized cash burn by approximately $15 million through a combination of direct and indirect operating cost savings, including certain costs not solely attributable to MarkForged. Nano Dimension will retain the Markforged Metal Binder Jetting product line.

“We are pleased to have reached an agreement with Stratasys that we believe positions MarkForged for continued growth and success under its ownership. This transaction represents a deliberate step in advancing Nano Dimension’s three phase strategic plan and accelerating Phase 3 execution,” said David Stehlin, Chief Executive Officer of Nano Dimension. “We have made meaningful progress across Phase 1 and Phase 2, including cost reductions, operational streamlining and multiple product line monetization actions. As Phase 3 continues to accelerate, we have recently advanced discussions with a focused set of strategic opportunities and potential partners aimed at maximizing long-term shareholder value.”

The transaction is expected to close in the second half of 2026, subject to customary closing conditions and regulatory approvals.

About Nano Dimension Ltd.

Driven by strong trends in onshoring, national security, and increasing product customization, Nano Dimension Ltd. (Nasdaq: NNDM) delivers advanced Digital Manufacturing technologies to the defense, aerospace, automotive, electronics, and medical devices industries, enabling rapid deployment of high-mix, low-volume production with IP security and sustainable manufacturing practices. For more information, please visit https://www.nano-di.com/.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Such forward-looking statements include statements regarding Nano’s strategic plan and focus on value to shareholders, the expected benefits of the transaction, the reduction in Nano’s annualized cash burn as a result of such sale, the expected timing of the closing of such sale and all other statements other than statements of historical fact that address activities, events or developments that Nano intends, expects, projects, believes or anticipates will or may occur in the future. Forward-looking statements may be characterized by terminology such as “believe,” “project,” “expect,” “anticipate,” “estimate,” “forecast,” “outlook,” “target,” “endeavor,” “seek,” “predict,” “intend,” “strategy,” “plan,” “may,” “could,” “should,” “will,” “would,” “will be,” “will continue,” “will likely result,” or the negative thereof or variations thereon or similar terminology generally intended to identify forward-looking statements. Such statements are based on management’s beliefs and assumptions made based on information currently available to management. These forward-looking statements involve known and unknown risks and uncertainties, which may cause the Company’s actual results and performance to be materially different from those expressed or implied in the forward-looking statements. Accordingly, we caution you that any such forward-looking statements are not guarantees of future performance and are subject to risks, assumptions, estimates and uncertainties that are difficult to predict. Because such statements deal with future events and are based on the current expectations of Nano, they are subject to various risks and uncertainties. The forward-looking statements contained or implied in this communication are subject to other risks and uncertainties, including those discussed under the heading “Risk Factors” in Nano’s annual report on Form 10-K filed with the Securities and Exchange Commission (the “SEC”) on March 31, 2026, and in any subsequent filings with the SEC. Except as otherwise required by law, Nano undertakes no obligation to publicly release any revisions to these forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events. References and links to websites have been provided as a convenience, and the information contained on such websites is not incorporated by reference into this communication.

Contacts:

Investors: Purva Sanariya
Director, Investor Relations
[email protected]

Media: Samuel Manning
Principal Manager, External Communications
[email protected]

MINNETONKA, Minn.--(BUSINESS WIRE)--Stratasys (NASDAQ: SSYS) celebrated the grand opening of its Americas Regional Corporate Headquarters (ARCH), a new 200,000-square-foot facility in Minnetonka, Minnesota, underscoring the company’s continued commitment to the U.S. market and to strengthening the high-tech manufacturing capacity that will help define the future of industrial innovation in Minnesota.

The event brought together United States Representative Betty McCollum; United States Representative Brad Finstad; United States Representative Kelly Morrison; Erin Streeter, EVP of National Association of Manufacturers; Scott Crump, inventor of Fused Deposition Modeling (FDM) and Stratasys Board Member, together with his wife Lisa Crump, co-founder of Stratasys in 1988; alongside Stratasys leadership, customers, partners, and community stakeholders, underscoring the critical role of additive manufacturing in strengthening regional economic development and industrial competitiveness.

United States Congressman and House Majority Whip Tom Emmer said: “Stratasys is helping Minnesota lead in innovation and development as a global leader in additive manufacturing. With the grand opening of their new facility in Minnetonka comes good paying jobs and economic growth. Their investments in the region are bringing hundreds of high‑skilled engineering, manufacturing, and technical jobs to Minnesota. I’ve been proud to support their work in the past and look forward to working with them in the future.”

United States Representative Betty McCollum added: “As a pioneer in additive manufacturing technologies, Stratasys is at the forefront of advancing our country's national and economic security. Their innovations are making the work of our service members safer, more efficient, and more cost-effective for the taxpayer. I’m thrilled to welcome their new facility here in Minnesota, and I look forward to watching them flourish as a premier innovator in the Twin Cities.”

Also speaking at the ceremony, Erin Streeter, Executive Vice President of the National Association of Manufacturers (NAM), added: “Congratulations to Stratasys on today’s grand opening, an exciting milestone for manufacturing in Minnesota. This investment strengthens the region’s manufacturing capabilities, supports strong jobs, and expands opportunities for manufacturing workers. Additive manufacturing is helping drive the next era of American manufacturing, and Stratasys’ continued investment in Minnesota is a strong example of that progress.”

Dr. Yoav Zeif, Chief Executive Officer of Stratasys, commented, “This state-of-the-art facility in Minnesota brings together our talent, technology, and the capabilities needed to innovate, collaborate, and help our customers accelerate additive manufacturing production at scale.”

ARCH brings together engineering, advanced research and development, applications expertise, and customer collaboration capabilities under one roof, along with Stratasys Direct, the company’s on-demand manufacturing business. Visitors to the facility can experience industrial-scale 3D printing technologies in action and see how Stratasys delivers production grade parts across aerospace, defense, automotive, healthcare, dental, and industrial applications.

“Bringing our teams together under one roof has a meaningful impact on how we operate, innovate, and serve our customers,” said Rich Garrity, Chief Business Unit Officer of Stratasys and NAM Board Member. “ARCH gives us the scale and workspace to accelerate collaboration across engineering, manufacturing, and customer facing teams, enabling faster delivery of high-quality solutions.”

As part of its commitment to the local community, with the teams on-site for the event, Stratasys also highlighted its partnership with High Tech Kids and its support for FIRST Robotics programs in Minnesota, reinforcing its role in advancing STEM education and developing the next generation of engineers.

The opening of ARCH follows a recent independent audit of Stratasys’ Environmental, Health, and Safety (EHS) management systems at the Minnetonka campus, which confirmed alignment with ISO 14001 and ISO 45001 standards and recommended renewal of both certifications. This demonstrates the company’s ability to scale operations while maintaining rigorous global quality, compliance, and ESG practices.

The launch of ARCH underscores Stratasys’ continued commitment to U.S.-based innovation, workforce development, and community engagement, reinforcing its leadership in advanced manufacturing and its role in enabling more sustainable production.

About Stratasys

Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries including aerospace, automotive, consumer products, and healthcare. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage of the product value chain. The world’s leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.

To learn more about Stratasys, visit www.stratasys.com, the Stratasys blog, X/Twitter, LinkedIn, or Facebook. Stratasys reserves the right to utilize any of the foregoing social media platforms, including Stratasys’ websites, to share material, non-public information pursuant to the SEC’s Regulation FD. To the extent necessary and mandated by applicable law, Stratasys will also include such information in its public disclosure filings.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Those forward-looking statements are based on current information that is, by its nature, subject to potential change, due to risks and uncertainties faced by the Company, including those risks described in Item 3.D “Key Information - Risk Factors” of Stratasys’ annual report on Form 20-F for the year ended December 31, 2024, which Stratasys filed with the SEC on March 6, 2025, and in other reports and documents that Stratasys files with or furnishes to the SEC from time to time, which are designed to advise interested parties of the risks and factors that may affect Stratasys’ business, financial condition, results of operations and prospects. Any forward-looking statements made in this press release are made as of the date hereof, and Stratasys undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.