Track market-moving stories before they get noisy

INJ‘nin arkasındaki Injective projesi aslında blockchain üzerinde finans işlerini yapmayı kolaylaştırmaya çalışıyor. Yani merkeziyetsiz borsa, vadeli işlemler, gerçek dünya varlıkları ve farklı finans uygulamalarını tek bir ekosistemde toplamayı hedefliyor. Bu da projeye sadece bir coin olmaktan daha fazlasını katıyor.

INJ tarafında bence en dikkat çekici konulardan biri arz yapısı. Piyasaya sonradan gelecek büyük miktarda token baskısı bulunmuyor. Bunun yanında ağdan elde edilen gelirlerin bir kısmıyla INJ geri alınıp yakılıyor. Yani proje büyüdükçe piyasadaki INJ miktarını azaltmaya yönelik bir sistem de bulunuyor. Bu durum uzun vadede token için önemli bir avantaj olabilir.

İlginizi Çekebilir: Bitcoin’de Dengeleri Değiştirecek İki Faktör!

Teknik olarak incelersek:

INJ/USDT paritesi günlük grafiği. 4$ desteğinden tepki aldıktan sonra yükseliş yaşayan INJ, ilk direnç seviyesi olan 6.13$ bölgesinden ret aldı. Bu ret sonrasında destek bölgesine kadar geri çekilen INJ, buradan aldığı tepkiyle yeniden yükselişe geçti ve 6.13$ bölgesini günlükte kazanmayı başardı. Artık önümüzdeki ilk hedef bölgesi 7$ olarak karşımıza çıkıyor. Bu bölgedeki likiditeyi almak için yükselişin devamını görebiliriz. Ancak paritenin şu an geldiği seviyeler yeni alım yapmak için oldukça pahalı. Bu nedenle son tepe yükselişini başlatan 5.14$ bölgesi, hem daha uygun fiyatlı hem de güçlü alıcıların bulunduğu bir alan olması nedeniyle olası geri çekilmelerde alım için takip edilebilir.

Son dakika kripto para haberleri için hemen tıkla

Konu ile ilgili yorumlarınızı bize yazabilirsiniz. Ayrıca, bu tarz bilgilendirici içeriklerin devamının gelmesini isterseniz, bizleri Telegram, Youtube ve Twitter kanallarımızdan takip edebilirsiniz.

Robinhood US now supports INJ transfers. You can trade USD for INJ, send it from Robinhood, and receive it in a self custody wallet on Injective.

The direct route uses native INJ. No bridge is required. Robinhood lists INJ among its supported transfer assets and lists one network confirmation for INJ deposits.

Keplr is the primary wallet in this tutorial because it displays the native Injective address that begins with 

The public Robinhood US page for buying Injective.Trade INJ on Robinhood, copy the native Injective address from any supported crypto wallet, and submit the transfer.What You NeedTo complete this tutorial, you need:

A verified Robinhood Crypto accountA Keplr or Metamask wallet with Injective availableEnough buying power to purchase INJRobinhood's transfer verification can take up to five business days.

Step 1. Copy your Injective address from KeplrOpen Keplr and select Injective from the network list.

Copy the address shown for the account. A native Injective address begins with 

Check the first and final characters after copying it.

Copy the native Injective address from Keplr.Step 2. Trade USD for INJ on RobinhoodOpen Robinhood and search for Injective or INJ.

Select Buy. Enter the amount, choose the available order option, review the purchase, and submit it.

Wait for INJ to appear as an available balance. Unsettled funding and transfer limits can restrict the amount you can send.

Trade INJ through Robinhood US.Step 3. Send INJ to KeplrOpen the INJ detail page in Robinhood and select Send.

Paste the native Injective address copied from Keplr. Enter the amount you want to send.

Confirm these fields before continuing.

The asset is INJ.The destination is the Keplr address you copied.The address begins with The displayed network matches Injective.The amount leaves enough room for the estimated network fee.Start with a small test transfer. Robinhood displays the network fee before submission and does not add its own transfer fee.

Select Review. Compare the address one more time, then select Submit.

Send native INJ from Robinhood US to Keplr.Step 4. Confirm the INJ balance on InjectiveOpen the Robinhood transfer status and copy the transaction ID. Refresh Keplr and confirm the INJ balance. You can also check the transaction ID or recipient address in InjScan.

Robinhood lists one confirmation for INJ deposits, with an estimated network time of about one second. Its account review can add time.

Robinhood shows the transfer while it moves onchain.Confirm the received INJ balance in Keplr.Keplr displays the native Injective address used in this tutorial. It begins with 

MetaMask displays an EVM address that begins with 

If INJ sending is unavailable in your accountCheck for a verification prompt, funding hold, transfer limit, or network maintenance. Wait when Robinhood identifies a temporary restriction.

Use USDC as a fallback only when the direct route is not available to your account.

Buy or hold USDC in Robinhood.Open MetaMask on Ethereum and copy its Send USDC from Robinhood over Ethereum to that MetaMask address.Add ETH to MetaMask for the bridge transaction fee.Open the Injective CCTP Bridge.Set Ethereum as the source and Injective as the destination.Approve USDC and confirm the transfer in MetaMask.Confirm the native USDC balance on Injective.

The source selected in Robinhood must match the bridge source. This Ethereum route produces native USDC on Injective.

USDC trading is unavailable through Robinhood Crypto in Texas. Check the live asset and transfer controls before funding this fallback.

Common errorsThe Send button is missingComplete Robinhood's crypto transfer verification. Then check for a funding hold, account restriction, transfer limit, or network maintenance notice.

Robinhood rejects the addressReturn to Keplr and copy the address under Injective. Confirm that it begins with 

The full balance is not availableRecent bank funding can remain unsettled. Open Account, Menu, then Crypto to view the current transfer limit.

Keplr does not show the balanceRefresh Keplr and select Injective. Check the recipient and transaction status in InjScan.

USDC reached MetaMask but cannot moveConfirm that the USDC is on Ethereum and that MetaMask has ETH for the network fee. Set Ethereum as the source inside the CCTP Bridge.

Regional availabilityRobinhood US and Robinhood Europe support direct INJ transfers. Robinhood Europe documents native 

Robinhood UK does not support crypto deposits or withdrawals to external wallets through its current Bitstamp UK integration. UK users need an exchange that supports outbound native INJ.

Check the live transfer screen before buying.

Move INJ onchainYour INJ is ready to use once Keplr shows the balance on Injective. Connect Keplr to Injective Hub to access staking, governance, and applications across the network.

About InjectiveInjective is the first blockchain purpose-built for finance, enabling users, institutions, and AI agents to trade, tokenize, and transact at scale. Proudly made in America, Injective provides foundational blockchain infrastructure for global markets, with embedded financial primitives spanning stablecoins, real-world assets, payments, and programmable perpetuals through a unified onchain engine. Injective is used by Fortune 500 companies, banks, fintechs, and governments to power an open economy where any asset can be accessed anytime, from anywhere. Builders can deploy across multiple virtual machines like WASM and EVM, connect to native financial modules, and launch markets with deep liquidity from day one. INJ is the native token powering the rapidly growing Injective ecosystem and the new internet economy.

Website | Telegram | Discord | Blog | Twitter/X | Youtube | Facebook | LinkedIn | Reddit | Instagram | Orbit Newsletter

Bitcoin, $82.320 seviyesini aşamamasının ardından yeniden geri çekildi. BTC, gece yarısından bu yana %0,42 düşerek 78.800 dolar civarına gerilerken son 24 saatteki kaybı %0,75 oldu.

Ancak piyasanın tamamı Bitcoin’i takip etmiyor. BNB %2 yükselirken PancakeSwap ve Syrup da değer kazandı. Aerodrome Finance ise yaklaşık %18’lik yükselişle günün en dikkat çekici altcoinlerinden biri oldu. Peki Bitcoin düşerken bazı tokenler neden yükseliyor?

BNB ve DeFi Tokenleri Neden Ayrışıyor? Piyasadaki yükselişin merkezinde BNB Chain bağlantılı tokenler bulunuyor. BNB, 754 dolara çıkarken PancakeSwap (CAKE) son 24 saatte %7,5, Syrup (SYRUP) ise yaklaşık %4,9 yükseldi.

CoinDesk 100’deki tokenlerin 42’si düşüşte olmasına rağmen BNB ve bağlantılı varlıkların pozitif kalması, sermayenin piyasanın belirli bölümlerine yöneldiğini gösteriyor.

DeFi tarafında ise daha sert hareket Aerodrome Finance’ta görüldü.

AERO Yükselişinin Arkasında Ne Var? Aerodrome Finance’in AERO tokeni son 24 saatte yaklaşık %18 yükselerek 64 sente ulaştı ve CoinDesk 100’ün en güçlü yükselen tokeni oldu.

Fiyat hareketine vadeli işlemler de eşlik etti. AERO’nun açık pozisyonları 129 milyon token ile rekor seviyeye çıktı.

Açık pozisyon, yatırımcıların vadeli piyasalarda hâlâ açık tuttuğu toplam pozisyonları gösteriyor. AERO’nun yükselen fiyatıyla birlikte bu verinin de artması, yeni pozisyonların harekete eşlik ettiğine işaret ediyor.

Üstelik AERO’nun CVD göstergesi de pozitif. Bu veri, alıcıların piyasa fiyatından daha agresif işlemler gerçekleştirdiğini gösteriyor.

Bitcoin Gerilerken Hangi Coinler Yükseliyor? AERO dışında Injective’in INJ tokeni de yaklaşık %10 yükseldi. INJ’nin yükselişi, son dönemde satışların yoğunlaştığı 6 dolar seviyesinin üzerine çıkmasıyla birlikte geldi.

VeChain’in VET tokeni de yaklaşık %8 değer kazanarak güçlü performans gösterdi. Böylece Bitcoin ve büyük kripto paralar baskı altındayken bazı DeFi ve blockchain tokenlerinde yükseliş devam etti.

Ancak piyasanın tamamı aynı yönde hareket etmiyor.

Raydium (RAY) gece yarısından bu yana %5,5 gerilerken Kaspa (KAS) %4,7 düştü. Bittensor (TAO) son 24 saatte %3,7 değer kaybetti. Jupiter (JUP) ise pazartesi günkü %9’luk düşüşün ardından %3,8 daha geriledi.

Türev Piyasası Bitcoin İçin Ne Söylüyor? Bitcoin tarafında satış baskısı sürerken vadeli işlemlerde toplam açık pozisyon yaklaşık 141 milyar dolar seviyesinde kaldı. Buna karşılık işlem hacmi %5 artarak 149,85 milyar dolara çıktı.

Bitcoin’in fiyatı yaklaşık 80.000 dolardan 78.700 dolara gerilerken bazı büyük vadeli işlem sözleşmelerindeki açık pozisyonların 257.000 BTC’den 265.000 BTC’ye yükselmesi de dikkat çekiyor. Bu hareket, bazı traderların düşüş beklentisiyle short pozisyon açmış olabileceğine işaret ediyor.

Buna karşın opsiyon piyasasında tamamen karamsar bir görünüm yok. Deribit’te haftalık vadeli işlemlerde call opsiyonların öne çıkması, kısa vadede yükseliş beklentisinin tamamen kaybolmadığını gösteriyor.

Bitcoin Düşerken Piyasa Nereye Yöneliyor? Bitcoin’in geri çekilmesi piyasadaki tüm sermayeyi aynı anda dışarı itmiyor. BNB Chain, DeFi ve bazı memecoinlerde görülen yükselişler, yatırımcıların belirli alanlarda risk almaya devam ettiğini gösteriyor.

Bitcoin tarafındaki yön ise yükselen petrol fiyatları, Fed’in faiz artırabileceğine ilişkin beklentiler ve yüksek tahvil getirileri nedeniyle baskı altında kalıyor.

Bu nedenle önümüzdeki hareketi anlamak için yalnızca Bitcoin’in fiyatına bakmak yeterli olmayabilir. Bitcoin zayıf kalırken AERO, BNB ve diğer ayrışan tokenlerdeki alımın devam edip etmeyeceği, piyasanın risk iştahı hakkında daha önemli bir sinyal verebilir.

Bu içerik genel piyasa verilerine dayanır ve yatırım tavsiyesi değildir. Kendi araştırmanızı yapmanızı öneririz.

Son Dakika kripto para haberleri için hemen tıkla.

Konu ile ilgili yorumlarınızı bize yazabilirsiniz. Ayrıca, bu tarz bilgilendirici içeriklerin devamının gelmesini isterseniz, bizleri Telegram, Youtube ve Twitter kanallarımızdan takip edebilirsiniz.

Injective Protocol (@injective) has confirmed that the total amount of staked $INJ has reached a new all-time high, with more than 58.8 million tokens now secured on-chain.

A Steady Climb in Staking Participation The milestone marks a substantial rise from the roughly 42 million INJ that were staked in early 2023. For context, data from late 2023 already showed the staked figure had climbed to around 44 million tokens, meaning the network has added well over 14 million staked INJ in the period since. The growth has been consistent even through periods of broader market volatility, pointing to sustained confidence among long-term holders rather than a short-term speculative spike.

Injective says the figure places it among the leading layer-1 networks by total staked supply. The claim carries weight: staking locks tokens out of active circulation, which can improve supply-demand dynamics over time and strengthen the economic security of the network.

Tokenomics Supporting the Trend The staking record arrives alongside additional supply-side activity. The Injective network recently completed its September Community Buyback, permanently removing 25,200 $INJ tokens from circulation. The buyback-and-burn programme is a recurring feature of Injective's tokenomics model, under which exchange fees collected across Injective-based applications are used to buy back and burn INJ through weekly on-chain auctions.

Injective is built on the Cosmos SDK and uses a Tendermint-based proof-of-stake consensus mechanism. Beyond network security, staked INJ also grants holders voting rights on governance proposals, including protocol upgrades and fee structures, making staking participation directly tied to how the network evolves.

The combination of a growing staked supply and ongoing token burns represents a tightening of the circulating float from both sides, a dynamic that the project has leaned into through successive tokenomics upgrades, including INJ 3.0 and the IIP-617 supply squeeze passed in January 2026.

Sources:
CoinCentral: Injective Staking at All-Time High and Token Burn Complete
Staking Rewards: Injective (INJ) Staking Data and APY

Injective to enable native privacy features in upcoming updates

Key Highlights A NYSE American-listed mortgage lender has successfully tokenized over $1 billion worth of residential mortgage data on the Injective network The initiative launched in December 2025 with 1,259 mortgage entries and expanded to 2,079 entries by September 2026 Every tokenized entry contains over 500 individual data points including borrower information, loan terms and risk metrics The ultimate goal involves migrating 29,000+ mortgage contracts valued at more than $10 billion The firm maintains an additional $100 million treasury position in Injective tokens A Toronto-headquartered mortgage lending company, Pineapple Financial, which trades on the NYSE American exchange, has successfully tokenized over $1 billion worth of residential mortgage data on the Injective blockchain. This development represents a significant milestone in the ongoing integration of traditional finance with blockchain infrastructure.

Today, over $1 Billion in real estate mortgages have been tokenized on Injective.

This also makes Injective one of the largest layer-1 chains by total RWA asset value and marks the beginning as Pineapple Financial tokenizes its $10 Billion portfolio on injective-protocol:native pic.twitter.com/Z6fmwQsOhJ

— Injective 🥷 (@injective) September 3, 2026

The tokenization initiative kicked off in December 2025 with an initial batch of 1,259 mortgage entries. Nine months later, in September 2026, the program had expanded to encompass 2,079 records, with the aggregate tracked value climbing to approximately $1.1 billion—representing growth of nearly 48% from inception.

Injective operates as a purpose-built layer-1 blockchain designed specifically for financial use cases. Pineapple selected this network as the technological backbone for its mortgage data tokenization initiative.

Every on-chain entry encompasses more than 500 distinct data points. This comprehensive dataset includes borrower credentials, loan specifications, funding timelines, and risk assessment metrics, all consolidated into a single verifiable blockchain record.

The company has emphasized that this initiative does not create novel financial instruments. Instead, the blockchain records function as a transparent layer above the underlying mortgages, which maintain their conventional legal frameworks. The distributed ledger component aims to streamline verification processes and enhance risk evaluation capabilities.

These tokenized mortgage records operate under the ticker PAPL0, which presently shows a market capitalization near $1.1 billion based on Token Terminal metrics.

Substantial Migration Still Pending With 2,079 entries completed against a total objective exceeding 29,000, the organization has finished approximately 7% of its comprehensive migration roadmap. The entire portfolio encompasses more than $10 billion in originated mortgage loans.

Beyond the mortgage tokenization program, Pineapple maintains a distinct $100 million position in Injective tokens, with cryptocurrency exchange Kraken functioning as a key validator for its staked assets. This treasury exists independently from the mortgage data initiative.

The firm has revealed plans for two complementary products connected to this program. The first involves a permissioned Mortgage Data Marketplace, designed to provide institutional participants with access to anonymized, granular loan analytics. The second offering, branded as Pineapple Prime, would enable investors to participate in mortgage-backed returns through blockchain-native channels.

Property Tokenization Gains Momentum Pineapple Financial is far from the only organization investigating blockchain applications for real estate documentation. This past June, Apex Group collaborated with Goldman Sachs, Archax, and LRC Group on a tokenized property fund built atop Goldman Sachs’ Digital Asset Platform.

Similarly, Dubai’s Land Department initiated the second stage of its real estate tokenization experiment in February, leveraging the XRP Ledger following the successful tokenization of approximately $5 million in properties during its initial phase.

Despite these developments, tokenized property assets remain a modest segment within the larger real-world asset ecosystem. The category currently represents roughly $226.5 million in distributed value, contrasted with $38.8 billion across all tokenized real-world assets monitored by RWA.xyz.

Nevertheless, Pineapple’s initiative ranks among the more ambitious individual undertakings in this domain, with its $10 billion migration objective significantly exceeding most comparable projects currently underway.

Pineapple Financial has moved more than $1 billion in residential mortgage records onto Injective, a layer-1 blockchain focused on financial applications, as part of a broader effort to migrate its historical loan portfolio onchain.

Pineapple plans to eventually migrate more than 29,000 funded mortgages worth over $10 billion onto the network, Injective said Friday. Each mortgage is represented by an onchain record tied to the underlying loan file, rather than being repackaged as a new mortgage security.

The records contain more than 500 data points, including loan-level information designed to support verification, audit trails and risk analysis. Pineapple’s dashboard shows that the migration now includes 2,079 mortgage records, up from 1,259 when the initiative launched in December 2025.

PAPL0, which tracks the mortgage records onchain, has an asset market cap of about $1.1 billion, up 48.2% over the past nine months, according to Token Terminal data. The tokens represent mortgage records rather than ownership of the underlying loans.

PAPL0 market cap on Injective. Source: Token Terminal

The mortgage migration is part of Pineapple’s broader relationship with Injective, which includes a separate $100 million Injective (INJ) digital asset treasury. Pineapple stakes INJ from the treasury, with Kraken serving as a primary validator for the holdings.

Real estate tokenization gains momentumReal estate has become a growing focus of the push to bring traditionally illiquid assets onchain, where tokenization can make property or investment interests easier to divide, transfer and access.

In June, Apex Group joined Goldman Sachs, Archax and LRC Group on a tokenized real estate fund whose shares are issued as digital tokens through Goldman Sachs’ Digital Asset Platform. The structure gives investors blockchain-based ownership of fund shares, rather than simply recording property data onchain.

Dubai has also expanded its real estate tokenization efforts. In February, the Dubai Land Department launched the second phase of a pilot after about $5 million in property had been tokenized, with transactions recorded on the XRP Ledger.

However, tokenized real estate still remains a small part of the broader real-world asset (RWA) market. The sector has about $226.5 million in distributed value, up 11.7% over the past 30 days, compared with $38.8 billion across tokenized RWAs tracked by RWA.xyz.

Tokenized real estate. Source: RWA.xyz

Magazine: Token buybacks are booming. But are they good for crypto projects?

Cointelegraph is committed to independent, transparent journalism. This news article is produced in accordance with Cointelegraph’s Editorial Policy and aims to provide accurate and timely information. Readers are encouraged to verify information independently.

Share

Blockchain

5 September 2026 | 01:47 Injective now carries records linked to more than $1 billion of Canadian mortgages, although the loans, their legal ownership and borrower payments remain in traditional systems.

Key Takeaways $1 billion measures referenced mortgage value. Its mortgage operations are entirely Canadian. PAPL0 does not transfer loan ownership. Migration covers 7.2% of target files. Mortgage-backed yield remains a future product. The $1 billion describes loans, not crypto liquidity Pineapple Financial has placed standardized records connected to residential mortgages on Injective, according to a September 4 announcement from the blockchain network.

The reported $1 billion is the value of the mortgages described by those records. It is not capital deposited on Injective, lending supplied by crypto investors or liquidity available for trading.

Pineapple Financial is a Toronto-based mortgage brokerage and technology company listed on NYSE American under PAPL. Its latest SEC filing says its mortgage division operates exclusively in Canada and earns no revenue from foreign mortgage markets. Its U.S. connection is the PAPL listing, not the mortgages represented on Injective.

PAPL0 is a data asset, not a mortgage claim PAPL0 is associated with Pineapple’s mortgage-record system. Injective describes each entry as an onchain counterpart to an existing loan file, not a mortgage security created for investors.

The published structure does not give a PAPL0 user ownership of the corresponding mortgage, rights over the borrower’s property or a claim on principal and interest payments. Those legal relationships continue to be governed by the original mortgage documents and servicing arrangements.

What has, and has not, moved onchain

Pineapple’s current deployment covers the record layer.

Mortgage record

Structured information connected to the original loan file is represented on Injective.

Legal ownership

The lender’s contractual rights and security over the property remain outside PAPL0.

Borrower payments

Principal and interest continue through the mortgage’s existing payment and servicing system.

Mortgage records show why aggregate RWA figures require context. Assets counted in the tokenized real-world asset market can represent ownership, cash-flow rights or only structured information about an asset held elsewhere.

Pineapple describes its Mortgage Data Marketplace as gated and aimed at institutional users. The available materials do not establish that retail investors can freely buy or transfer PAPL0.

Migration covers 7.2% of Pineapple’s target The project launched in December 2025 with 1,259 mortgage records. It has since added 820, representing growth of approximately 65% from its starting point.

That expansion is measurable, but most of the intended migration remains ahead. Pineapple ultimately plans to represent more than 29,000 historical mortgage files on Injective.

CURRENT RECORDS

2,079

Mortgage files represented on Injective.

PLANNED TOTAL

29,000+

Historical mortgage files targeted for migration.

RECORD PROGRESS

About 7.2%

Share of the intended file count completed.

Pineapple’s original announcement valued its historical portfolio at approximately C$13.7 billion. Injective describes the target as more than $10 billion without making the currency conversion explicit. The two figures appear to describe the same portfolio in different currency presentations rather than separate pools of mortgages.

Injective also says Token Terminal lists approximately $1.1 billion in asset market capitalization for PAPL0. The figure appears to track the mortgage value associated with the records, rather than a market price established through liquid trading. It should not be read as $1.1 billion invested in PAPL0.

The dashboard verifies activity, not the mortgages Pineapple’s digital-assets portal allows readers to follow the company’s reported migration. Blockchain activity can provide evidence that records were created, when they appeared and whether later entries changed their history.

The dashboard cannot independently establish whether every referenced mortgage is valid, whether its reported balance is current or whether Pineapple’s aggregate valuation matches the legal loan files.

That limitation is important because both the dashboard and the underlying data begin with information supplied by Pineapple. A blockchain can make submitted information easier to trace, but it cannot independently inspect a mortgage contract, verify a borrower’s payments or assess the property securing the loan.

The 500 data points are not necessarily public Injective says every record contains more than 500 data points designed to support verification, risk analysis and audit trails. Pineapple also describes its system as using traceable IPFS references and permissioned access for institutional participants.

Mortgage information can include sensitive financial and personal details, but the published materials do not identify which specific fields are included in Pineapple’s records. They also do not explain which information is written directly to Injective, which remains in controlled storage or whether linked IPFS material is encrypted.

A record can be publicly traceable even when its underlying information remains encrypted or access-controlled. Evaluating Pineapple’s privacy claims will therefore require more detail about its data architecture, access permissions and key management than the announcement currently provides.

Changing mortgage data requires an authority Mortgage files do not remain static. Their balances decline as principal is repaid, while refinancing, arrears and loan discharges can change the status of the underlying obligation.

An onchain system therefore needs a controlled method for adding updated information, linking it to the previous version and marking outdated data appropriately. Injective says the records preserve update history, but it does not identify who can authorize corrections or resolve a conflict between an onchain entry and Pineapple’s legal file.

Without a clear correction process, immutability preserves the history of an error without resolving its effect on current data.

Injective is Pineapple’s partner and shareholder Injective’s article should be read as a partner announcement rather than independent confirmation. Pineapple’s SEC filing identifies the Injective Foundation as one of the company’s largest shareholders and classifies it as a related party.

The filing says the foundation’s ownership may give it significant influence over Pineapple’s strategic direction and financing activities. The relationship does not invalidate the disclosed figures, but independent confirmation would require evidence beyond statements from the two partners.

Pineapple also maintains a separate INJ digital-asset treasury. That creates financial exposure to Injective’s native token but is unrelated to the mortgage value represented by PAPL0.

Mortgage-backed yield remains a separate step Pineapple is developing another product called Pineapple Prime, which it says will offer onchain access to mortgage-backed yield. The company’s website continues to label it “coming soon.”

Pineapple Prime would be a separate step because offering mortgage-backed yield requires a legal mechanism connecting a digital asset to loan income. Its structure would need to explain who owns the mortgages, how payments reach investors, what happens after a default and which participants may access the product.

Injective currently functions as a verification layer for Pineapple’s mortgage data, extending the network’s broader expansion into tokenized real-world assets. Any move toward investable mortgage products will depend on Pineapple Prime’s legal structure, access rules and connection to loan cash flows.

The article is provided for informational purposes only and does not constitute legal, financial or investment advice.

Author

Alex is Editor-in-Chief of Coindoo and co-founder of Millennial Media Group, with nearly a decade of experience covering financial markets - crypto first, then everything else. It started in 2016 with Bitcoin. Like most people at the time, he didn't fully understand it - so he kept digging. Blockchain, tokenomics, the projects, the cycles. That curiosity never stopped, and eventually pulled him into traditional markets too: equities, commodities, macro. Not because he left crypto behind, but because you can't properly understand one without the other. What drives him is straightforward: he wants to know why something is happening, not just that it's happening. Most market coverage stops at the headline - price up, price down, here's a chart. Alex finds that kind of reporting actively unhelpful. If you walk away from an article without understanding the mechanism behind the move, what did you actually learn? He holds a degree in Tourism from New Bulgarian University - not the most obvious path into financial markets, but markets have a way of pulling in people who are simply too curious to stay out. He has authored over 200 in-depth analyses and more than 10,000 articles across crypto and traditional finance. He still thinks every day in markets teaches him something new. That's probably why he hasn't stopped.

Two Protocols, One Goal: Lowering the Barrier to Token Creation@Injective has integrated two no-code protocols, Trippy Pump and TokenStation, to simplify on-chain asset creation for both retail users and developers. The move removes one of the more persistent friction points in crypto: the need for smart contract programming just to get a token off the ground.

Trippy Pump uses a bonding curve mechanism supporting $INJ, $USDC, and $SAI trading pairs. Once a project crosses a defined capital threshold, it is automatically graduated to @ChoiceXchange liquidity pools, providing immediate market depth without any manual intervention from the creator.

TokenStation, described by the Injective team as the first native token launcher on Injective, gives creators direct control over every parameter of their asset. Creators can set a token's name, symbol, logo, and initial supply, and can also manage mint and burn functions after launch.

Instant Price Discovery for Emerging AssetsThe practical effect of combining these two tools is that meme tokens and experimental assets can now reach live markets with price discovery and liquidity in place from day one. The new infrastructure removes that requirement entirely.

The integration sits within a broader period of active development on Injective.

Together, Trippy Pump and TokenStation position Injective as a destination for permissionless asset launches, competing with similar launchpad infrastructure on other Layer 1 networks while keeping the process accessible to non-technical users.

Sources:
Injective Blog: How to Launch a Token on Injective
Injective Docs: Token Launch
TokenStation Official App

Injective is now one of the leading layer-1 blockchains by total value of tokenized assets onchain. Pineapple Financial has moved more than $1 billion in residential mortgage records onto Injective, turning a growing share of its historical loan book into digital records that can be inspected and verified onchain.

The company, listed on NYSE American as PAPL, is migrating funded residential mortgage records onto Injective. Each mortgage is represented by a metadata-rich onchain record tied to the underlying loan file, rather than repackaged as a new mortgage security.

Pineapple's stated goal is to migrate its entire historical portfolio over time: more than 29,000 funded mortgages which amount to more than $10 billion in value.

Mortgage markets move enormous amounts of debt, but the records behind them often remain fragmented across PDFs, email threads, and operational systems. Servicers, custodians, and counterparties may have to reconcile ownership and servicing information across separate databases, turning routine verification into a slow manual process.

Pineapple is changing the location and structure of the mortgage record itself.

What Is Being TokenizedThis is not a synthetic instrument designed to track a mortgage portfolio. Pineapple is converting records from a working mortgage loan book into standardized onchain data assets. The original mortgage remains within its legal and servicing framework, while the tokenized record provides an auditable digital counterpart that captures loan-level data, provenance, and update history.

That distinction matters because the practical value comes from giving authorized participants a consistent, verifiable record. Instead of maintaining separate copies and reconciling them later, the parties involved can inspect the same underlying information.

How It WorksEach tokenized record contains more than 500 data points, enough to make it useful for more than a timestamp or proof of existence. Structured loan-level data can support automated verification, real-time audit trails, more responsive risk analysis, and compliant sharing with institutions that need to inspect a portfolio.

The back-office workflow changes with it. A servicer or auditor can query a consistent record instead of assembling a picture from disconnected files, reducing the delays and duplication that make mortgage administration expensive.

Where Pineapple Fits in the Broader StackPineapple's migration illustrates why tokenization is not simply an issuance exercise. An asset needs a clear identity, rules governing who can interact with it, and records that remain aligned as it moves or changes.

Injective Mint, now live in private alpha, brings creation and administration into a single interface. Institutions can define an asset, configure holder and jurisdictional restrictions, assign administrative roles, and manage issuance or redemption without writing a custom contract. A deeper look into Injective Mint can be viewed here.

Pineapple's mortgage program is a distinct deployment, but it reflects the same shift from a standalone token toward an operating onchain asset. For securities, the record layer also carries a regulated function. On August 19, Injective Institutional Services became registered with the U.S. Securities and Exchange Commission as a transfer agent, and the registration is effective. That affiliated capability can support official securities ownership and transfer records alongside onchain settlement. It does not make Pineapple's mortgage records, or every asset created through Mint, a security; it gives institutions that issue regulated products another piece of the operational and regulatory infrastructure they need.

The Traction So FarThe migration is already measurable. Pineapple's dashboard reports 2,079 mortgage records onchain, compared with 1,259 at the December 2025 launch. Token Terminal lists PAPL0 at roughly $1.1 billion in asset market cap, an increase of about 48% over the past nine months.

That remains early against a target of more than 29,000 mortgages, but it is no longer just a proof of concept.
Pineapple is moving a live portfolio in public, one record at a time, with the progress available for anyone to follow.

Anchored by an INJ TreasuryThe mortgage migration is one part of Pineapple's broader relationship with Injective. Separately, the company established a $100 million INJ Digital Asset Treasury, giving it balance-sheet exposure to the network alongside its operational use of the infrastructure.

Pineapple stakes INJ from the treasury, with Kraken serving as a primary validator. The treasury and the tokenization program are distinct initiatives, but together they show a company committing both operating data and capital to the same financial rails.

See It For YourselfPineapple's tokenized book is public and independently trackable. Follow the live mortgage dashboard and view PAPL0 on Token Terminal.
 

About InjectiveInjective is the first blockchain purpose-built for finance, enabling users, institutions, and AI agents to trade, tokenize, and transact at scale. Proudly made in America, Injective provides foundational blockchain infrastructure for global markets, with embedded financial primitives spanning stablecoins, real-world assets, payments, and programmable perpetuals through a unified onchain engine. Injective is used by Fortune 500 companies, banks, fintechs, and governments to power an open economy where any asset can be accessed anytime, from anywhere. Builders can deploy across multiple virtual machines like WASM and EVM, connect to native financial modules, and launch markets with deep liquidity from day one. INJ is the native token powering the rapidly growing Injective ecosystem and the new internet economy. 

Website | Telegram | Discord | Blog | Twitter | Youtube | Facebook | LinkedIn | Reddit | Instagram | Orbit Newsletter

Tokenization has proved that financial assets can move onto shared ledgers, but it has also exposed the harder problem. A regulated asset needs more than a token contract. It needs enforceable rules governing ownership, transfers, issuance, redemption, administration, custody, and emergency action. Those rules must remain attached to the asset throughout its lifecycle and apply every time it changes hands.

Most issuers today still assemble those functions across custom smart contracts, compliance providers, custodians, internal databases, and manual workflows. Every new asset becomes a bespoke technical project, while even routine actions such as changing an administrative role or freezing a compromised address can require engineering support. Market infrastructure comes later, if it comes at all.

Injective Mint changes that model by bringing the entire issuance process into one platform. It gives institutions a single interface to define an asset, encode its operating rules, assign authority, and issue it directly on Injective. No custom contract or command line is required, enabling the institution to remain in control from initial issuance through the full life of the asset.

Through one workflow, issuers can configure approved holders, jurisdictional restrictions, issuance and redemption permissions, administrative roles, address freezes, and global pauses. These are not policies stored in a document or checked by a separate system after settlement. They are enforced directly by Injective, meaning the network rejects any transfer that falls outside the rules established by the issuer.

Mint also addresses what happens after an asset is created. Most tokenization platforms stop once the asset reaches a wallet, leaving issuers to find liquidity and assemble the rest of the financial stack themselves. Assets issued through Injective Mint enter a network already built for trading, lending, derivatives, collateral, and other financial applications, creating a direct path from issuance to real onchain utility.

The opportunity extends across some of the largest asset classes in the world. Tokenized real estate alone is projected to reach $4 trillion by 2035, while treasuries, private credit, funds, commodities, stablecoins, deposits, and other financial products expand the addressable market considerably further. Capturing that opportunity will require infrastructure that can do more than create digital representations of assets. It must support how those assets are controlled, settled, administered, and used.

Injective is already proving that this infrastructure can operate at scale. The network has surpassed $6.8 billion in settled real-world asset volume and $1.1 billion in native asset issuance. Injective Institutional Services is now registered with the SEC as a transfer agent, while POSCO International and LG CNS have selected Injective for a live trade-receivables tokenization pilot.

Injective Mint is now live in private beta, bringing these capabilities together through a platform designed to make institutional-grade issuance accessible to institutions and everyday users alike. Institutions define the asset, establish its operating rules, and retain authority over it. Injective provides the infrastructure required to issue, administer, settle, and put that asset to work onchain.

This is how real-world assets move beyond isolated pilots and become functioning financial products. This is the foundation Injective Mint was built to provide as we accelerate real world asset issuance for the new age of onchain finance.

01. How We Got HereCreating a token is easy. Operating one as a financial product is not.

A treasury product may limit ownership to verified investors in approved jurisdictions. A stablecoin issuer needs separate authority for issuance and redemption. A fund administrator may need to freeze one address without stopping every holder. A security needs an accurate ownership record that stays aligned with transfers, distributions, and voting rights.

Legacy tokenization stacks solve these requirements through layers of contracts, scripts, databases, service providers, and manual reconciliation. Each additional system creates another handoff. Every handoff adds cost, time, and operational risk.

Injective took a different route. The network built issuance and permission controls at the protocol level. Mint packages those controls into a unified product for institutional teams.

Mint turns those protocol controls into a unified platform that institutional teams can operate directly. Compliance teams can translate decisions about investor eligibility, jurisdictions, issuance, redemption, and emergency action into onchain configurations through a guided interface. Issuing an asset with those controls no longer requires a software engineer to deploy custom contracts or update permissions by hand. The institution defines the policy. Injective Mint encodes it onchain.

02. Injective Mint in One ViewInjective Mint is an issuance and asset management platform for institutional-grade financial products.

An issuer starts by defining an equity, exchange traded fund, bond, commodity, foreign exchange product, stablecoin, fund, or another instrument.

The issuer is then equipped with a powerful platform that simplifies tokenization for the first time in a manner that is as simple as filing out information in a form. In essence the issuer is able to customize the following:

Asset identity sets the name, ticker, type, supply, and issuing entity.Jurisdiction settings define where the asset can circulate.Custody settings identify providers such as Fireblocks or BitGo.Holder rules determine which addresses can receive and own the asset.Administrative roles separate issuance, redemption, compliance, and asset management authority.Emergency controls let authorized parties freeze an address or pause activity across the asset.Once the issuer confirms the configuration, Injective writes the asset and its rules to the network onchain. As soon as the tokenization process is completed onchain, the RWA can be viewed on InjScan, where its supply, transfers, holders, and administrative actions can be verified.

This is more than a form placed in front of a token contract. Mint coordinates two native Injective backend modules that determine how the asset exists and how it may move.

03. From Definition to IssuanceThe TokenFactory module creates the asset as a native Injective denomination.

Each denomination is namespaced to its creator address. That structure removes naming collisions while preserving a clear administrative origin. The original creator receives authority to mint, burn, transfer, or change the asset administrator according to the configured model.

Mint then creates a permissions namespace for the asset. The namespace contains the actions, roles, managers, policy states, and optional contract logic that govern the asset throughout its lifecycle.

TokenFactory establishes the asset. The Permissions module determines who may act on it. Mint turns that sequence into one guided flow.

For the issuer, the process is straightforward: 

Enter the asset data. Select the permitted jurisdictions. Set supply. Identify the issuer and custodian. Assign the parties authorized to hold, send, receive, mint, burn, or administer the asset. Review the configuration. Confirm the transaction.The final state lives onchain. Mint removes bespoke contracts and manual scripts while retaining an institutional audit trail.

04. Compliance Lives in the AssetThe Injective RWA module uses role based access control at the chain level.

Every permissioned asset has its own namespace. When an address attempts to mint, receive, burn, or send the asset, Injective checks the relevant permissions before the transaction completes.

The model separates authority with precision.

Mint authority creates supply and directs it only to an address permitted to receive it.Receive authority determines which addresses may hold the asset.Send authority lets approved holders transfer only to approved recipients.Burn authority lets an address redeem or destroy its own balance under the asset rules.Super burn authority lets an approved administrator remove funds from another wallet when the operating model requires it.Role managers decide which addresses receive each role. Policy managers control whether specific actions remain enabled across the namespace. An issuer can pause sends, receipts, minting, or burning during a compliance or security event without rebuilding the asset.

A blacklist role can remove every permission from one address. Once the role is removed, the address regains its previous permissions. This gives an institution targeted control without forcing a global shutdown.

Injective also supports Wasm contract hooks when an issuer needs logic beyond the base permission model. A hook can inspect the sender, recipient, action, and amount when an asset is received. That creates room for product specific controls while keeping the core permission system native to the network.

These rules do not sit in a policy document waiting for an operator to check them after settlement. The chain applies them during execution. A transfer outside the configured rules fails.

05. Issuance Is Only the BeginningMany tokenization platforms stop when the asset reaches a wallet. That creates representation without a market.

Injective Mint issues assets into a financial network built for spot trading, derivatives, lending, collateral, and programmable applications. Subject to the rules set by the issuer and the integrations available for the product, a Mint asset can enter secondary markets, support a lending market, act as collateral, or anchor a new derivative.

Access is not automatic. Mint does not create liquidity by itself, and it does not replace the legal analysis required for a financial product. It gives issuers a direct route from creation to market infrastructure without moving the asset onto a separate chain or rebuilding the financial stack around it.

That route is already taking shape. Injective has supported institutional products including Laser Digital's Laser Carry Fund through Libre, BlackRock money market products, and Hamilton Lane's SCOPE Senior Credit Fund. POSCO International and LG CNS also selected Injective for a live trade receivables pilot tied to international commerce.

Funds, private markets, public equities, and enterprise receivables carry different structures. They can now operate across one network with shared settlement and permission infrastructure.

06. The Regulated Record LayerIssuance and transfer controls solve only part of the institutional problem. Securities also need an authoritative ownership record.

On August 19, Injective Institutional Services became registered with the U.S. Securities and Exchange Commission as a transfer agent. The registration is now effective.

A transfer agent maintains the official record of who owns a security. It processes ownership changes, reconciles securities issued against securities outstanding, and supports the records used for distributions, voting rights, and transfers.

Traditional tokenization often separates the onchain token from that official register. Institutions then reconcile two versions of ownership.

Injective now has a path to bring those records closer together. Injective Mint creates the asset and encodes its operating rules. Injective also adds an affiliated SEC-registered transfer agent function that can support official ownership and transfer records. Injective provides the settlement and market infrastructure beneath both.

The distinction remains exact. Issuing an asset through Mint does not automatically make it a security. It does not satisfy every regulatory requirement. Each issuer must configure the product around the laws and obligations that apply to it.

What changes is the available infrastructure. An issuer can build issuance, permissions, administration, recordkeeping, and settlement around one onchain system.

07. One System for the Asset LifecyclePrivate alpha gives participating institutions a direct way to test this model across real issuance workflows.

A bank can define a permissioned deposit token. An asset manager can issue a fund for approved investors. A fintech can launch a stablecoin with controlled supply. An enterprise can tokenize receivables with ownership and transfer rules.

Each product differs. The infrastructure stays consistent.

That consistency changes the economics of issuance. Institutions can reuse an operating model across assets instead of commissioning another custom stack for every launch. Compliance teams can map policy to named roles and actions. Administrators can change permissions without sending each update back to an engineering team. Investors and counterparties can verify activity onchain.

Institutions need issuance, permissions, ownership records, settlement, and market utility to work together.

Injective Mint brings issuance and onchain control into one interface. Injective Institutional Services adds the registered recordkeeping function. Injective connects the asset to a live financial network.

Define the asset, encode the rules, issue it into a market built for onchain finance.

This is how tokenization moves from isolated pilots to operating financial products. Injective will lead the way towards a new future where everything is tokenized onchain.

About InjectiveInjective is the first blockchain purpose-built for finance, enabling users, institutions, and AI agents to trade, tokenize, and transact at scale. Proudly made in America, Injective provides foundational blockchain infrastructure for global markets, with embedded financial primitives spanning stablecoins, real-world assets, payments, and programmable perpetuals through a unified onchain engine. Injective is used by Fortune 500 companies, banks, fintechs, and governments to power an open economy where any asset can be accessed anytime, from anywhere. Builders can deploy across multiple virtual machines like WASM and EVM, connect to native financial modules, and launch markets with deep liquidity from day one. INJ is the native token powering the rapidly growing Injective ecosystem and the new internet economy.

Website | Telegram | Discord | Blog | Twitter | Youtube | Facebook | LinkedIn | Reddit | Instagram | Orbit Newsletter

Injective Protocol has confirmed that an exploit affected a limited number of ecosystem applications running binary options markets, prompting an accelerated network upgrade that has since been completed. The team said the core blockchain, consensus mechanism, and native assets were not compromised at any point.

What Happened The incident centred on Injective's binary options module, a permissionless system that allows developers to build and settle prediction-style markets on-chain. According to independent on-chain analysis, the attack involved a flaw in how the protocol generates market identifiers. The protocol concatenates several parameters to produce a market_id, and this hashing scheme allowed an attacker to create an $INJ-denominated insurance fund that collided with the identifier of a USDC-denominated binary options market. When the refund procedure was triggered, the system may have treated minimal balances as sufficient to cover significantly larger liabilities, suggesting a deeper flaw in the settlement logic.

Injective went dark for roughly three hours and 42 minutes on August 31. Funds from the suspected exploit were moved from Injective to Ethereum via Circle CCTP, with a portion subsequently swapped through Uniswap and consolidated into ETH. On-chain data shows approximately 1,979.8 ETH, valued at roughly $4.88 million, collected in a single address. Block production stopped at block 181,027,006 around 16:10 UTC and resumed with block 181,027,007 at approximately 19:52 UTC, with no rollback of confirmed transactions occurring during the recovery.

Network Status and Response Injective completed an accelerated network upgrade following the incident, with the team stating it did not compromise the blockchain, consensus mechanism, native $INJ assets, or user and staked funds. Some validators were temporarily jailed, and several exchanges paused deposits and withdrawals while completing node upgrades.

As of its September 1 statement, the Injective network is fully operational, temporary restrictions on certain exchanges are being lifted as node updates finish, and staked assets remain secure. Injective said it is introducing additional technical controls, including enhanced invariants, real-time monitoring systems, and further safeguards intended to detect unusual activity earlier.

The incident renewed scrutiny of Injective's decision to remove its core chain repositories from GitHub. Critics contend the exploit demonstrates the limits of security through obscurity, noting the attacker relied solely on public SDK documentation and legacy compiled binaries to reverse-engineer the vulnerability, while independent auditors and whitehat researchers were denied the source-level access needed to identify the flaw proactively.

Sources:
Injective Confirms Secure Network Upgrade After App Exploit – The Crypto Times
Injective Exploited For $4.9M Via Market ID Collision – Metaverse Post
Injective Network Hit by $4.9M Exploit and Outage – CryptoDnes

7 hours ago

Injective officials announced that community contributors coordinated an accelerated network upgrade yesterday. As the time required for all validators and ecosystem infrastructure to complete the upgrade exceeded expectations, some validators were temporarily jailed, leading to a temporary dip in the network’s staked amount. Several exchanges also temporarily suspended INJ deposits and withdrawals. Injective stressed that its blockchain network and INJ token remained fully secure throughout the process: the underlying protocol and consensus mechanism were not compromised, user and staked funds suffered no losses or risks, and the network continued processing transactions without any downtime. The official noted that the accelerated upgrade was triggered by attacks on a small number of binary options market applications within the Injective ecosystem. The incident only impacted those applications, and did not exploit the Injective blockchain, protocol, native assets, or consensus mechanism. The attack vector has since been contained and repaired. Injective added that its team is deploying enhanced security mechanisms, real-time monitoring systems, and additional protective measures to identify abnormal activities earlier and reduce the risk of similar incidents recurring.

Scan the QR code

Download APP

According to official announcements, Upbit has designated Injective (INJ) as a "Trading Attention Project". Currently, Injective (INJ)'s deposit and withdrawal services have been suspended. When services resume, only withdrawal functionality will be opened first. BlockBeats previously reported that Injective stopped block production for approximately 3 hours and 42 minutes on August 31, with the block height recovering from 181,027,006 to 181,027,007, and no rollback occurred during the period. QuickNode's status records also show that the Injective mainnet experienced a global block stall that day, prompting the deployment of an emergency patch. Attackers are suspected of repeatedly exploiting Injective's insurance fund and permissionless binary options market creation mechanism, executing a total of 299 related operations, ultimately transferring approximately 1,979.8 ETH (valued at around $4.88 million) to a single address.

Relevant content

Gold and silver fall to two-week lows as surging global bond yields weigh on precious metals.

According to Bitget market data, gold and silver prices extended their recent downtrend, as safe-haven demand for precious metals was temporarily suppressed by high interest rate pressure amid sell-offs in major global bond markets and a rapid rise in long-term yields. Spot gold fell nearly 1.8% intraday to around $4,370 per ounce, hitting its lowest level since August 19; spot silver dropped nearly 3% to around $64.5 per ounce. On the same day, the U.S. 10-year Treasury yield broke above 4.75%, Germany’s 10-year Bund yield climbed to a 15-year high, and Japan’s 10-year JGB yield surpassed 3% for the first time since 1996. Markets are concerned that escalating tensions in the Middle East could push up oil prices and inflation, potentially forcing major central banks to maintain tight monetary policies or even raise interest rates further, thereby continuing to lift the opportunity cost of holding gold, a non-yielding asset. Going forward, markets will focus on the ADP employment data scheduled for September 2 and the U.S. Non-Farm Payrolls report on September 4 to gauge the Federal Reserve’s interest rate hike expectations and the future trajectory of bond yields.

9 minutes ago

ARB surged over 33% in 24 hours, with its market cap rising to $1.065 billion.

Per HTX market data, ARB has rallied over 33% in 24 hours, currently trading at $0.1149, with its market capitalization climbing to $1.065 billion. Earlier, Steven Goldfeder, co-founder of Offchain Labs, noted that 10% of fees generated by Robinhood Chain and other Arbitrum Layer 2 (L2) chains will flow to the Arbitrum ecosystem: 8% will go to a treasury controlled by token holders, while 2% will be allocated to development funds. This mechanism means the ARB token holder treasury will secure a steady revenue stream, with the relevant funds earmarked for ecosystem grants, buybacks, or staking rewards in the future. The Robinhood Chain ecosystem has recently boomed, with both DeFi applications and meme coin trading sentiment surging. If Robinhood Chain’s trading volume continues to grow, it may further strengthen the Arbitrum ecosystem’s revenue-generating capacity.

9 minutes ago

GoPro shares rise 86% in pre-market US trading after YouTuber Markiplier becomes its largest shareholder.

According to BIT (Bit.com) market data, U.S. stock GoPro (GPRO) saw a sharp pre-market jump of around 86% on Tuesday, with its price briefly hitting near $1.63. On the news front, YouTube star Markiplier (real name Mark Fischbach) disclosed via a Schedule 13G filing that he holds approximately 8.5% of the company’s shares, making him the largest individual shareholder. Boasting nearly 40 million subscribers, Markiplier has recently ventured into film production. He stated that he believes GoPro’s stock is undervalued and hopes to help the company return to profitability. Prior to this, he had already shot content using GoPro devices and has been following the company’s upcoming MISSION 1 Pro ILS interchangeable-lens camera. Driven by this news, GPRO already surged around 46% during regular trading hours on Monday, and continued to rise in after-hours trading, with retail investor buying pushing the stock price even higher. GoPro’s fundamentals remain under pressure recently; its Q2 revenue declined approximately 31% year-over-year. The company is currently conducting a strategic review, and this rally is primarily driven by the celebrity shareholding effect.

9 minutes ago

US-listed cryptocurrency-related concept stocks generally fell in pre-market trading, with MSTR down 2.92%.

According to market data from BIT (bit.com), pre-market U.S. crypto-related stocks are mostly lower, with MSTR down 2.92%, CRCL down 2.53%, COIN down 2.14%, BMNR down 2.05%, SBET down 1.88%, and PURR down 2.04%.

9 minutes ago

Morgan Stanley upgrades Robinhood’s rating, noting that the monetization potential of its existing users is being underestimated by the market.

Morgan Stanley has upgraded Robinhood’s rating from "Hold" to "Overweight" and raised its price target from $124 to $150, implying an approximate 43% upside from Monday’s closing price. Analysts noted that the market has increasingly recognized Robinhood’s accelerated new product launches and expansion of its potential market size, though the monetization capability of its existing user base remains undervalued. Morgan Stanley pointed out that Robinhood’s roughly 28 million users form an important growth foundation, and its new businesses like prediction markets are boosting per-user asset size, trading activity, and monetization efficiency. Among these, prediction markets have fewer than 2 million users, yet contributed $156 million in revenue in the second quarter and drove users to adopt other products. Analysts also believe that Robinhood’s derivatives trading platform and clearing house Rothera will further expand its distribution advantages and bring opportunities for infrastructure and third-party revenue.

9 minutes ago

Solana's non-voting cumulative transaction volume hit an all-time high in August, reaching 5.2 billion transactions.

Solana officials stated that the Solana network processed 5.2 billion non-voting transactions in August, marking an all-time high and a 19% rise from the previous record set in July.

9 minutes ago

South Korea trade giant POSCO brings trade receivables to Avalanche in latest tokenization move

Not financial or tax advice. PANews content is strictly educational and informational and is not investment advice, financial advice, tax advice, legal advice, or a solicitation to buy or sell any digital asset, security, or financial product. Do your own research and consult qualified advisers.

Disclosure. PANews may publish sponsored content, partner content, advertisements, affiliate links, event promotions, and market commentary involving Web3 projects, service providers, or financial products. PANews personnel, contributors, or affiliates may hold digital assets or other interests related to covered topics. See our Terms of Service.

This site is protected by reCAPTCHA.

Injective's (@injective) September Community BuyBack round filled within hours of opening, according to @injective, with the event valued at more than $168,000. The speed of the fill underscores growing demand for a program that has quietly become one of the more distinctive deflationary mechanisms in the Layer-1 space.

How the BuyBack Works Revenue payouts are distributed in USDT and other tokens, while the burned supply is removed from circulation for good.

Price Context $INJ traded near $5.30 on the day the September round filled, down about 7.7% over 24 hours, though still up roughly 21% on the week after recovering from under $4.40 on August 20, per CoinMarketCap data.

Sources:
Injective: 2026 Community BuyBack Guide
The Defiant: Injective Introduces the INJ Supply Squeeze
Invezz: Why Is Injective Price Up 45% This Week?

@injective has announced it is working with @circle and teams across the @cosmos ecosystem to move legacy $USDC versions onto the native issuance that Circle launched on Injective in May, with the broader migration now targeting September.

The legacy versions in scope include Noble-issued USDC and bridged variants that have circulated across Cosmos chains. The goal is to consolidate them onto a single, natively issued standard backed directly by Circle, removing the fragmentation that has long complicated stablecoin use across interchain applications.

How the native issuance works The foundation for this shift was laid on May 7, 2026, when native USDC and Circle's Cross-Chain Transfer Protocol (CCTP) went live on the Injective mainnet. CCTP allows USDC to move natively across blockchains, meaning tokens are burned on the source chain and minted on the destination chain rather than locked in a bridge contract. It was also Circle's first MultiVM issuance of the token.

The integration was intended to ensure continued USDC availability across Cosmos chains after Noble announced its migration plans to a dedicated EVM Layer 1 and positioned its Cosmos SDK chain into maintenance mode. By taking over that position, Injective is expected to absorb more than $100 million in stablecoin issuance connected to the ecosystem.

Cosmos Hub commitment and rollout Four days after launch, the Cosmos Hub adopted the Injective issuance as the ecosystem's reference USDC under a minimum four-year commitment, with Skip:Go set to treat it as the default USDC denomination. Cosmos Hub, Cosmos Labs, and Skip Protocol confirmed that Injective-issued USDC will route through the Inter-Blockchain Communication (IBC) protocol.

The migration rolls out over the coming months, with dYdX going first, and Cosmos Labs coordinating the rollout for additional chains and applications across the ecosystem. Migration tools are also being prepared for chains and DeFi platforms transitioning from previous USDC liquidity providers. For users, the frontend experience is expected to remain mostly unchanged.

A portion of fees generated from Injective USDC activity will also be allocated to programmatically buy back ATOM, the native token of the Cosmos Hub.

Sources
Injective: USDC Adopted by Cosmos and dYdX as Canonical Stablecoin Standard
Crypto Times: Cosmos Hub Adopts Injective USDC as Primary Stablecoin
Crypto Briefing: Injective Initiates Migration of Exchange dApps to USDC Standard

Injective's native token $INJ has climbed 39% over the past seven days, making it one of the standout performers among mid-cap cryptocurrencies. The token was trading at $5.74 at time of writing, adding 9.4% in 24 hours, with trading volume up 62% to $132 million. The broader market, by comparison, gained only low single digits over the same period.

SEC Transfer Agent Registration Drives Sentiment Much of the momentum traces back to a regulatory milestone reached last week.

, rather than a digital copy of a separate database entry.

Canary Capital ETF Filing Still Pending A separate regulatory catalyst is also in play.

The application remains pending with the regulator, and no timeline for a decision has been confirmed.

Together, the transfer agent registration and the outstanding ETF application represent a concentrated push by @injective into regulated U.S. capital markets infrastructure, which is fuelling the current price advance.

Sources:
Injective: SEC Transfer Agent Registration (Official Blog)
The Block: Injective Becomes SEC-Registered Transfer Agent
ETF.com: Canary Capital Files for First Staked INJ ETF

Mercuryo gives new users a direct route from fiat currency to Injective.

Choose INJ, enter your Injective wallet address, pay with a supported bank card, and receive the tokens directly in your wallet. You do not need to purchase another asset or use a separate bridge.

This guide covers the full process with MetaMask, Keplr, or any other Injective-supported wallet. Both wallets support Injective and give you control of your assets. Read more in the Injective wallet documentation.

Before you beginYou need:

MetaMask or Keplr installed and set upAccess to the Injective HubAn email address you can accessA supported bank cardA valid government-issued identity document (if Mercuryo requests verification)A device with a camera for the identity checkMercuryo availability, payment limits, accepted documents, and supported cards depend on your country. Your bank must also permit cryptocurrency purchases.

Always check the domain before entering personal or payment information. The official widget used in this guide is exchange.mercuryo.io.

Never share your wallet recovery phrase, private key, password, or email verification code with anyone.

Step 1 - Copy Your Injective Wallet AddressOpen the Injective Hub and select the wallet control in the upper right corner.

Choose MetaMask or Keplr. Follow the wallet prompt to approve the connection.

The Hub will display the Injective address tied to your connected account. It begins with inj.

Copy this address. Check the first and last characters before moving forward.

MetaMask users must copy the inj address shown by Injective Hub, not the Ethereum address beginning with 0x. Keplr users must confirm that Injective is the selected network before copying the address.

Go to the Mercuryo purchase widget.

Confirm that the browser address begins with https://exchange.mercuryo.io/.

The purchase interface shows a fiat amount, a cryptocurrency selector, an estimated quote, and the Buy button.

Step 3 - Select INJOpen the cryptocurrency selector. The widget may show another asset when it first loads.

Search for INJ and choose Injective.

Confirm that the asset field now shows INJ before entering your purchase amount.

Step 4 - Choose Your Fiat Currency and AmountOpen the fiat currency selector and choose the currency you want to spend.

Enter the purchase amount. Mercuryo will calculate the estimated amount of INJ you will receive.

The quote can change with the market. The final amount appears before you approve the card payment.

Step 5 - Review the Quote and FeesOpen the order details below the quoted amount.

Review:

The fiat amountThe estimated INJ amountThe exchange rateMercuryo feesNetwork feesThe total card chargeConfirm that the final amount matches your expectations. Fees and limits can change based on the purchase amount, currency, payment method, and location.

Mercuryo explains how to view these charges in its widget purchase guide.

Step 6 - Enter Your Injective Wallet AddressSelect Buy.

Mercuryo will ask where you want to send the INJ. Paste the inj address copied from Injective Hub into the wallet address field.

Compare the first and last characters with the address displayed in your wallet. Confirm that the address belongs to you.

Do not type the address manually. An incorrect destination can cause permanent loss.

Select Continue once every character matches.

Step 7 - Confirm Your EmailEnter an email address you can access.

Mercuryo will send a verification code to that address. Enter the code to continue.

Existing Mercuryo users may also need to enter their account password. Follow the instructions shown for your account.

Never share the verification code or password with another person.

Step 8 - Complete Identity VerificationMercuryo may ask you to verify your identity before processing the purchase.

Follow the instructions shown on the screen. The process can include:

Entering your personal informationSelecting an accepted government-issued documentUploading clear images of the documentCompleting a selfie checkSubmitting the information for reviewAccepted documents depend on your country. Mercuryo states that verification can require a passport, national identity card, driving licence, or another supported document.

Use an unexpired document. Make sure the information matches your Mercuryo account.

Read the Mercuryo identity verification guide for current document requirements.

Step 9 Pay With Your Bank CardChoose the bank card payment option.

Enter the requested card details. Review the purchase amount and final charge before submitting the payment.

Mercuryo currently supports Visa, Mastercard, and Maestro card payments. Your bank can still decline the transaction if it blocks cryptocurrency purchases or international payments. Payment availability also depends on your region and currency.

Read Mercuryo’s supported payment methods before purchasing.

Your bank may open a 3D Secure confirmation screen. Approve the payment through your bank’s app, website, or verification prompt.

Step 10 - Track the Purchase and Verify Your INJMercuryo will show the order status after the card payment is authorized.

To check the transaction later, open the menu in the upper right corner of the Mercuryo widget and select Transactions. Sign in with the same email address, then open the INJ purchase.

Once Mercuryo provides a transaction hash, you can use it to track the onchain transfer.

Return to the Injective Hub and connect the same MetaMask or Keplr account. Open the wallet page and confirm that the INJ balance has arrived.

Processing time can vary. If the order remains pending, check its status inside Mercuryo before starting another purchase. Mercuryo provides more instructions in its transaction tracking guide.

Start using InjectiveYour INJ is now in a wallet you control.

You can use the same MetaMask or Keplr account to access Injective applications, pay network fees, stake INJ, and participate in governance.

Open the Mercuryo widget, select INJ, and fund your Injective wallet with a bank card.

DisclaimerThis article is for informational purposes only. It is not financial, investment, legal, or tax advice.

Mercuryo is a third-party service. Availability, identity requirements, supported cards, limits, exchange rates, fees, and processing times depend on the user and region. These conditions can change.

Review Mercuryo’s terms and the final purchase quote before confirming a payment. Cryptocurrency transactions cannot be reversed after execution. Verify the Mercuryo domain, selected asset, destination address, amount, and fees before completing the purchase.

About InjectiveInjective is a lightning fast interoperable layer one blockchain optimized for building the premier Web3 finance applications. Injective provides developers with powerful plug-and-play modules for creating unmatched dApps. INJ is the native asset that powers Injective and its rapidly growing ecosystem. Injective is incubated by Binance and is backed by prominent investors such as Jump Crypto, Pantera and Mark Cuban.

Website | Telegram | Discord | Blog | Twitter | Learn | Youtube | Facebook|LinkedIn | Reddit | Instagram | Orbit Newsletter

@injective has built a suite of synthetic perpetual markets, called iAssets, that let traders gain exposure to equities, commodities, and foreign exchange without holding the underlying asset.

Margin is posted in $USDT (or other supported stablecoins), and leverage is available, varying by market. The contracts are accessed primarily through frontends like the Helix decentralized exchange.

How oracle pauses workThe 24/7 nature of crypto creates a structural tension with traditional markets. FX and commodity price feeds do not run continuously, and equity feeds follow their own session schedules. For equities, the oracle pauses only on weekends, aligned with the underlying equity market structure.

Traders can still open or close positions during a freeze, but profit and loss stays fixed at the last reported price, making liquidation virtually impossible until the feed resumes.

Capital efficiency without the collateral poolInjective's design distinguishes it from CDP-based synthetic protocols by avoiding pre-funded collateral pools and instead relying on market makers to provide depth and dynamically allocate capital. Builders on Injective can permissionlessly access Pyth price feeds spanning equities, commodities, FX, and crypto. These feeds have already been integrated by Helix, a decentralized order book exchange serving retail traders and institutions alike.

Injective's RWA perpetuals crossed $6 billion in cumulative volume by early November 2025, per Messari, with by mid-2026. The oracle-pause mechanism is a key part of that infrastructure, ensuring that market access remains open even when the underlying data source goes offline, without exposing traders to unfair liquidations in the process.

Sources:
Injective Docs: iAssets Overview
Injective Docs: 24/5 Equity Feeds and SEDA Integration
CoinGecko: Injective in 2026 Convergence Report

Key Highlights Table of Contents

Injective secures SEC transfer agent registration for maintaining securities ownership records. The registration enables Injective Institutional Services to manage official transfer documentation. Injective Mint platform integrates compliance controls with transfer agent capabilities. The network extends its RWA ecosystem across investment funds, equity markets, and commercial finance. Federal registration reinforces Injective’s position in compliant blockchain-based securities markets. Injective has secured SEC transfer agent registration, bolstering its compliance framework for tokenized securities operations. This federal authorization empowers Injective Institutional Services to manage authoritative ownership documentation and execute securities transfer processes. The milestone represents Injective’s transition from purely blockchain technology provider to regulated financial infrastructure participant supporting tokenized real-world assets.

Federal Transfer Agent Authorization Brings Regulated Recordkeeping Onchain Following its SEC registration approval, Injective Institutional Services now operates within federal transfer agent regulatory parameters. Transfer agents serve as authoritative custodians of securities ownership data, documenting legitimate owners and recording ownership modifications between registered parties. These entities additionally facilitate dividend distributions, share redemptions, issuance documentation, and various securities administration tasks.

This authorization resolves a critical disconnect between blockchain-based settlement mechanisms and conventional securities ownership frameworks. While tokenized securities frequently transfer via blockchain networks, separate traditional databases typically preserve their legally binding ownership documentation. Service providers must then align blockchain transaction data with regulated ownership information following each transfer event.

Injective now integrates blockchain settlement capabilities with an affiliated registered entity managing securities recordkeeping under federal oversight. SEC regulatory guidance permits registered transfer agents to implement distributed ledger technology within official shareholder registry systems. These agents remain obligated to satisfy all relevant federal securities compliance standards while deploying blockchain solutions.

Injective Mint Platform Strengthens Comprehensive Tokenization Infrastructure Injective Mint represents an additional element within the network’s extensive regulated asset creation framework. This platform enables financial institutions to generate tokenized instruments while embedding compliance mechanisms directly into protocol architecture. Asset creators can implement transfer limitations, administrative authorizations, jurisdictional parameters, and wallet-level controls through a unified interface.

Injective Mint further accommodates functionality including token creation, redemption processes, address-specific restrictions, and emergency transfer suspension capabilities. Injective Institutional Services provides official ownership documentation and transfer record management for securities deployed on the network. Combined, these capabilities deliver comprehensive infrastructure spanning asset creation, administration, recordkeeping, settlement, and portfolio management.

This infrastructure does not automatically classify every token issued via Injective Mint as a regulated security. Individual instruments remain subject to their specific legal frameworks, regulatory designations, and applicable compliance obligations. Nevertheless, the transfer agent authorization provides issuers with an additional regulated component when constructing compliant tokenized financial instruments.

Expanding Institutional Adoption Across Multiple Asset Categories Injective has broadened its tokenization operations throughout institutional investment vehicles, equity instruments, private markets, and corporate finance applications throughout 2025. Laser Digital previously deployed its Laser Carry Fund as a tokenized product via Libre, alongside additional institutional investment vehicles. The platform subsequently enabled secondary market trading, lending operations, and portfolio margining functionality for designated tokenized instruments.

Injective later penetrated private equity markets and corporate trade finance sectors utilizing its blockchain foundation. POSCO International and LG CNS designated the network for a trade receivables demonstration involving cross-border commercial transactions. This initiative encompasses issuance, ownership transfers, administrative functions, and settlement of receivables originating from actual international trade operations.

The SEC registration now incorporates federally regulated securities recordkeeping into Injective’s growing blockchain-based financial ecosystem. Injective has additionally finalized the notification procedures for its INJ MiCA white paper within European jurisdictions. These regulatory achievements fortify the network’s compliance infrastructure across principal markets while facilitating expanded institutional tokenization adoption.

Oliver Dale

Editor-in-Chief of Blockonomi and founder of Kooc Media, A UK-Based Online Media Company. Believer in Open-Source Software, Blockchain Technology & a Free and Fair Internet for all. His writing has been quoted by Nasdaq, Dow Jones, Investopedia, The New Yorker, Forbes, Techcrunch & More. Contact [email protected]

Key Highlights INJ token rallied approximately 9% to reach $4.40 following significant regulatory developments Injective Institutional Services received SEC registration status as a transfer agent in the United States This approval enables securities ownership documentation to be maintained using blockchain technology Previous partnerships include collaborations with BlackRock, Nomura’s Laser Digital, and Hamilton Lane The platform has also secured registration on Europe’s ESMA Interim MiCA Register The Injective token experienced a significant price increase of roughly 9%, reaching $4.40, following the announcement that Injective Institutional Services has successfully completed registration with the United States Securities and Exchange Commission as an official transfer agent.

Injective (INJ) Price Transfer agents serve as custodians of official securities ownership documentation and handle modifications to those records. The SEC permits registered transfer agents to utilize distributed ledger technology for their primary securityholder files. This authorization means ownership documentation can be recorded and maintained natively on blockchain networks.

This development represents a significant milestone for the tokenized securities sector. Traditionally, blockchain platforms record ownership data onchain while the legally binding record remains stored in conventional databases. This separation frequently creates reconciliation challenges between blockchain-based transactions and traditional record-keeping infrastructure.

Injective now has

SEC Transfer Agent Registration ✅

MiCA Whitepaper in the EU ✅

Injective Mint Alpha for Tokenizing Assets ✅

LG CNS and Korea’s largest trading firm POSCO selecting Injective for its tokenization pilot ✅

Institutional-grade RWAs are here on $INJ

— Injective 🥷 (@injective) August 20, 2026

The registration obtained by Injective specifically addresses this discrepancy. The platform now possesses the authority to maintain official securities documentation directly on its blockchain network, effectively bridging the divide between these two record-keeping approaches.

Compliant Framework for Blockchain-Based Securities This registration complements Injective Mint, a platform designed to enable issuers to create and oversee assets with built-in compliance mechanisms at the protocol level. Available functionalities include transfer limitations based on holder identity and geographic location, administrative controls assigned by role, the ability to freeze specific addresses, and regulated token creation and redemption processes.

Injective has established a proven history in this domain. The network has facilitated tokenized institutional investment vehicles, publicly traded equity securities, private company shares, and corporate receivables. Previous implementations have included partnerships with Hamilton Lane, BlackRock, and Nomura’s Laser Digital division.

Compliance Efforts Expand Across the Atlantic The regulatory approval extends beyond American borders. Injective’s INJ MiCA documentation has been added to ESMA’s Interim MiCA Register following successful completion of the mandatory notification and disclosure procedures required throughout Europe.

According to company representatives, both the American transfer agent authorization and the European MiCA registration represent components of a comprehensive initiative to integrate blockchain-based financial systems with the regulatory structures necessary for widespread institutional acceptance.

This news arrived during a particularly active period for cryptocurrency regulation in the United States. President Donald Trump has scheduled meetings with representatives from the SEC, CFTC, and cryptocurrency companies such as Coinbase and Ripple while the CLARITY Act experiences procedural setbacks. Additionally, the SEC published a new regulatory approach for crypto investment contracts earlier this week.

With this registration, Injective enters an exclusive circle of American cryptocurrency organizations that have obtained official transfer agent certification.

Injective Institutional Services is now officially registered with the SEC as a transfer agent, joining a small group of US crypto organizations with a registered transfer agent function and strengthening its push to bring regulated financial markets onchain, according to a Wednesday announcement.

The registration enables the Injective-affiliated entity to support securities recordkeeping and the processing of ownership transfers.

Advertisement

Transfer agents are responsible for maintaining authoritative records of security ownership and handling changes to those records. Because SEC staff permits registered transfer agents to use distributed ledger technology as their official master securityholder file, the registration could allow ownership records to be maintained directly onchain and updated alongside settlement.

Injective said the registration strengthens its tokenization stack alongside Injective Mint, which lets issuers create and manage assets with protocol-level compliance controls. The platform supports restrictions based on holders and jurisdictions, role-based administration, controlled minting and redemption, address freezing and transfer pauses.

The team is building on an existing track record in tokenization. Its network has supported tokenized institutional funds, public equities, private-company markets and enterprise receivables, including products involving Nomura’s Laser Digital, BlackRock and Hamilton Lane.

Injective is also pursuing regulatory infrastructure outside the US, with its INJ MiCA white paper listed on ESMA’s Interim MiCA Register after completing the required notification and publication process.

The company said the US transfer agent registration and European MiCA work are part of an effort to pair onchain financial infrastructure with the regulatory frameworks required for institutional adoption.

Disclosure: This article was edited by Editorial Team. For more information on how we create and review content, see our Editorial Policy.

Injective receives SEC transfer agent registration for institutional services armInjective’s affiliated entity can now maintain securities ownership records, adding regulated market infrastructure to its growing push into tokenized assets.

Injective Institutional Services, an entity affiliated with the Injective blockchain ecosystem, said its registration with the US Securities and Exchange Commission (SEC) as a transfer agent is now effective, adding a regulated securities recordkeeping function to Injective’s tokenization infrastructure.

Wednesday’s announcement said that the registration allows the affiliate to maintain securities ownership records and process ownership changes, an important function in traditional securities markets that could also support tokenized real-world assets (RWAs).

The company plans to pair the transfer agent function with Injective Mint, its platform for issuing and managing tokenized assets.

The registration follows Injective’s expansion of its tokenization efforts in recent months, including markets offering exposure to digital asset treasury companies, equities and shares in pre-IPO companies.

As Cointelegraph reported, Injective Institutional Services filed its application to register as a transfer agent with the SEC in July.

Transfer agents are part of the regulated infrastructure underpinning US securities markets. They maintain records of who owns securities and process ownership changes, a function that becomes particularly relevant when securities are issued or transferred onchain.

Magazine: Data of 54,000 wallet users leaked, CLARITY odds just 10%: Hodler’s Digest

Cointelegraph is committed to independent, transparent journalism. This news article is produced in accordance with Cointelegraph’s Editorial Policy and aims to provide accurate and timely information. Readers are encouraged to verify information independently.