AdaptHealth Corp. (NASDAQ: AHCO) (“AdaptHealth” or the “Company”), a national leader in providing patient-centered, healthcare-at-home solutions including home medical equipment, medical supplies, and related services, announced today that its Board of Directors has named Harriss T. Currie as its Chief Financial Officer, effective September 9, 2026. Mr. Currie will assume CFO responsibilities from Jason Clemens, who will assist with the transition through October 1, 2026.
Mr. Currie previously served as the CFO for Luminex Corp (Nasdaq: LMNX) for more than 15 years until its sale to DiaSorin in 2021. He has more recently held CFO roles at Health Track Rx from 2025 to 2026 and from Impulse Dynamics from 2022 to 2023, and served as President of the Regenerative Medicine division of 3D Systems (NYSE: DDD) from 2023 to 2025.
Mr. Currie holds an MBA from the McCombs School of Business at the University of Texas at Austin and previously served as an audit manager at Deloitte & Touche.
“We are delighted to welcome Harriss to AdaptHealth and look forward to the meaningful contributions we expect he will make in both the short and long term,” said Suzanne Foster, Chief Executive Officer. “We appreciate Jason’s years of service and are particularly thankful for the strong team and structure he has left for Harriss to build on.”
“I am excited to join AdaptHealth and to lead the finance team through our next phase of growth. In evaluating this opportunity, I saw a strong leadership team, solid financial processes, and a business that has put strategic contracts in place to position itself for meaningful revenue and EBITDA growth. I am truly excited and appreciative of this opportunity,” said Mr. Currie.
About AdaptHealth Corp.
AdaptHealth is a national leader in providing patient-centered, healthcare-at-home solutions including home medical equipment, medical supplies, and related services. The Company operates under four reportable segments that align with its product categories: (i) Sleep Health, (ii) Respiratory Health, (iii) Diabetes Health, and (iv) Wellness at Home. The Sleep Health segment provides sleep therapy equipment, supplies and related services (including CPAP and BiLevel services) to individuals for the treatment of obstructive sleep apnea. The Respiratory Health segment provides oxygen and home mechanical ventilation equipment and supplies and related chronic therapy services to individuals for the treatment of respiratory diseases, such as chronic obstructive pulmonary disease and chronic respiratory failure. The Diabetes Health segment provides medical devices, including continuous glucose monitors and insulin pumps, and related services to patients for the treatment of diabetes. The Wellness at Home segment provides home medical equipment and services to patients in their homes including those who have been discharged from acute care and other facilities. The segment tailors a service model to patients who are adjusting to new lifestyles or navigating complex disease states by providing essential medical supplies and durable medical equipment.
The Company is proud to partner with an extensive and highly diversified network of referral sources, including acute care hospitals, sleep labs, pulmonologists, skilled nursing facilities, and clinics. AdaptHealth services beneficiaries of Medicare, Medicaid, and commercial insurance payors, reaching approximately 4.5 million patients annually in all 50 states through its network of approximately 670 locations in 48 states.
Forward-Looking Statements
This press release includes certain statements that are not historical facts but are forward-looking statements for purposes of the safe harbor provisions under the United States Private Securities Litigation Reform Act of 1995. Forward-looking statements generally are accompanied by words such as “believe,” “may,” “will,” “estimate,” “continue,” “anticipate,” “intend,” “expect,” “should,” “would,” “plan,” “predict,” “potential,” “seem,” “seek,” “future,” “outlook,” and similar expressions that predict or indicate future events or trends or that are not statements of historical matters. These forward-looking statements include, but are not limited to, statements regarding projections, estimates and forecasts of revenue and other financial and performance metrics and projections of market opportunity and expectations and the Company’s acquisition pipeline. These statements are based on various assumptions and on the current expectations of AdaptHealth management and are not predictions of actual performance. These forward-looking statements are provided for illustrative purposes only and are not intended to serve as, and must not be relied on, by any investor as, a guarantee, an assurance, a prediction or a definitive statement of fact or probability. Actual events and circumstances are difficult or impossible to predict and will differ from assumptions. Many actual events and circumstances are beyond the control of the Company.
These forward-looking statements are subject to a number of risks and uncertainties, including the outcome of judicial and administrative proceedings to which the Company may become a party or governmental investigations to which the Company may become subject that could interrupt or limit the Company’s operations, result in adverse judgments, settlements or fines and create negative publicity; changes in the Company’s customers’ preferences, prospects and the competitive conditions prevailing in the healthcare sector. A further description of such risks and uncertainties can be found in the Company’s filings with the Securities and Exchange Commission. If the risks materialize or assumptions prove incorrect, actual results could differ materially from the results implied by these forward-looking statements. There may be additional risks that the Company presently knows or that the Company currently believes are immaterial that could also cause actual results to differ from those contained in the forward-looking statements. In addition, forward-looking statements reflect the Company’s expectations, plans or forecasts of future events and views as of the date of this press release. The Company anticipates that subsequent events and developments will cause the Company’s assessments to change. However, while the Company may elect to update these forward-looking statements at some point in the future, the Company specifically disclaims any obligation to do so. These forward-looking statements should not be relied upon as representing the Company’s assessments as of any date subsequent to the date of this press release. Accordingly, undue reliance should not be placed upon the forward-looking statements.
View source version on businesswire.com: https://www.businesswire.com/news/home/20260908762966/en/
It has been about a month since the last earnings report for 3D Systems (DDD - Free Report) . Shares have lost about 7.6% in that time frame, underperforming the S&P 500.
But investors have to be wondering, will the recent negative trend continue leading up to its next earnings release, or is 3D Systems due for a breakout? Well, first let's take a quick look at its latest earnings report in order to get a better handle on the recent catalysts for 3D Systems Corporation before we dive into how investors and analysts have reacted as of late.
DDD Q2 Earnings Beat Estimates, Strong Printer Sales Aid Top Line3D Systems reported a second-quarter 2026 non-GAAP loss of 4 cents per share, narrower than the year-ago loss of 6 cents and beat the Zacks Consensus Estimate by 55.56%.
Revenues slipped 0.3% year over year to $94.6 million but surpassed the consensus mark by 0.48%. Double-digit growth in metal and polymer printer systems, along with strength in key healthcare and industrial markets, supported the quarter.
Adjusted for software divestitures completed in 2025, total revenues increased 1.4% year over year. The improvement reflected accelerating sales of newly launched printers as customers expanded their use of additive manufacturing across production applications.
DDD’s Printer Sales Support Core GrowthProduct revenues rose 1.9% year over year to $54.8 million, while services revenues declined 3.2% to $39.7 million. 3D Systems highlighted double-digit growth in both metal and polymer hardware printer systems, underscoring improving demand for the company’s refreshed equipment portfolio.
Healthcare Solutions revenues increased 6.8% year over year to $48.1 million, making the segment the company’s largest business during the reported quarter. Growth was driven primarily by higher sales of new printer systems in Med Tech and continued expansion in Personalized Healthcare Services.
Med Tech revenues grew more than 20%, while Dental revenues increased 3%. Management said customers in these markets continued adopting 3D printing as a core manufacturing technology and broadening the range of applications deployed.
However, Industrial Solutions revenues declined 6.7% year over year to $46.5 million. Excluding the impact of software divestitures, the segment’s revenues decreased 3.7% year over year, reflecting the exit of a non-core product offering and lower hardware services revenues. Sequentially, Industrial revenues increased 2.4% on higher product sales.
Aerospace & Defense and Data Center Infrastructure each delivered growth of more than 20%, helping offset weakness elsewhere in the portfolio. Aerospace & Defense remained the company’s largest industrial market.
3D Systems’ Margin Pressure Offsets Cost CutsGross profit fell to $34.5 million from $36.2 million reported in the year-ago quarter. Gross margin contracted 170 basis points (bps) to 36.4%, while non-GAAP gross margin excluding software divestitures declined 150 bps to 36.7%.
The margin decline reflected a greater mix of printer sales and certain pricing pressures. These headwinds were partly offset by approximately $2.6 million in tariff refunds recovered during the quarter.
Operating expenses decreased 12.4% year over year to $45.1 million. Research and development expenses dropped to $10 million from $17.4 million, while selling, general and administrative expenses increased to $35.1 million from $34.1 million.
Adjusted EBITDA improved to a loss of $0.8 million from a loss of $4.7 million on a comparable basis. Prior cost-reduction measures and tariff refunds supported the improvement.
3D Systems Strengthens Its Liquidity PositionTotal cash stood at $129 million at June 30, including $128 million in cash and cash equivalents.
The company has $3.9 million of debt principal maturing in the fourth quarter of 2026, with the remaining $92 million due in 2030.
DDD Issues Third-Quarter OutlookFor the third quarter of 2026, 3D Systems expects revenues between $96 million and $99 million. The range is above the second-quarter revenue level and points to continued momentum from new printer introductions and priority end markets.
Adjusted EBITDA is projected between a loss of $3 million and a loss of $1 million. Management remains focused on Med Tech, Dental, Aerospace & Defense and Data Center Infrastructure, all of which recorded growth exceeding 20% during the first half of 2026.
How Have Estimates Been Moving Since Then?It turns out, fresh estimates have trended upward during the past month.
The consensus estimate has shifted 26.09% due to these changes.
VGM ScoresCurrently, 3D Systems has a nice Growth Score of B, though it is lagging a bit on the Momentum Score front with a C. Charting a somewhat similar path, the stock has a grade of D on the value side, putting it in the bottom 40% for value investors.
Overall, the stock has an aggregate VGM Score of C. If you aren't focused on one strategy, this score is the one you should be interested in.
OutlookEstimates have been trending upward for the stock, and the magnitude of these revisions looks promising. Notably, 3D Systems has a Zacks Rank #3 (Hold). We expect an in-line return from the stock in the next few months.
New CRADA drives joint development of advanced materials, AI/ML process optimization, equipment enhancements, and scalable production solutionsPositions additive manufacturing to support nuclear energy systems, energy infrastructure resilience, and national security missionsCreates pathway from collaborative research to workforce training, technology transfer and commercial-scale industrial applications ROCK HILL, S.C., Aug. 27, 2026 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD) today announced that it has entered into a Cooperative Research and Development Agreement (CRADA) with Savannah River National Laboratory (SRNL) to accelerate innovation in additive manufacturing (AM) for advanced energy generation and national security applications. The partnership centers on SRNL’s Advanced Manufacturing Collaborative (AMC), leveraging the facility’s unique position as South Carolina’s only national laboratory-operated site located on a public university campus.
Through this CRADA, SRNL and 3D Systems will jointly pursue advancements in materials development, equipment enhancements, artificial intelligence and machine learning-enabled process optimization, manufacturing systems, cybersecurity, and workforce development training. These efforts will drive the creation of next-generation AM materials, real-time process optimization tools, and scalable production solutions, along with the workforce that will enable the rapid adoption of advanced manufacturing technologies.
“We look forward to partnering with SRNL at the Advanced Manufacturing Collaborative and deploying 3D Systems’ leading AM technologies,” said Jeff Graves, President and CEO of 3D Systems. “This agreement demonstrates the impact and importance of high-quality 3D printing materials and technologies on key industrial markets, particularly energy and national security, and on developing the skilled workforce those markets require.”
A primary emphasis of the collaboration is the application of additive manufacturing to critical energy challenges, with particular relevance to nuclear energy and broader energy infrastructure. Additive manufacturing enables the fabrication of complex components from advanced alloys that are difficult or impossible to produce using conventional methods. This includes high-temperature nickel-based superalloys and other radiation-tolerant materials for intricate heat exchangers with internal cooling channels, reactor internals, pumps, valves, and other high-performance components essential to advanced nuclear systems. These capabilities support improved performance under extreme conditions, reduced material waste, greater design freedom, and enhanced supply-chain resilience, all essential for advanced nuclear reactor systems, fusion energy technologies, power generation equipment, and U.S. energy infrastructure modernization.
The partnership is timed to support a period of renewed investment and innovation across the U.S. nuclear and energy sectors. Advanced reactor designs, small modular reactors (SMRs), and related energy initiatives are driving demand for manufacturing approaches that can accelerate development cycles, reduce costs, and strengthen domestic production capacity. This collaboration is timely given the projected expansion of advanced nuclear capacity worldwide. According to the International Energy Agency, small modular reactor capacity could grow to roughly 40 gigawatts under current policies or up to 120 gigawatts in accelerated scenarios by 2050, supporting rising demand for reliable, low-carbon power in applications ranging from data centers and industrial heat to grid stability and energy security1. By combining 3D Systems’ commercial AM platforms and materials expertise with SRNL’s deep domain knowledge in nuclear materials, environmental stewardship, and energy resilience, the collaboration aims to help bridge laboratory innovation with industrial readiness.
“This collaboration positions SRNL and 3D Systems to deliver groundbreaking additive manufacturing technologies, strengthen U.S. manufacturing competitiveness, and drive forward the next era of AM innovation,” said Roderick Jackson, associate laboratory director for science, energy and innovation at SRNL.
While structured as a cooperative research and development agreement, the CRADA is intentionally designed to create a clear pathway from foundational research to technology transfer and commercial application. Cutting-edge 3D Systems equipment has been installed at the AMC and is supported by facility upgrades and resident AM subject-matter experts. This infrastructure will enable both world-class research and the demonstration of production-ready processes, positioning the partners to develop scalable manufacturing solutions with broader implications for high-value industrial markets including nuclear energy, aerospace and defense, and environmental technologies.
“This agreement underscores SRNL’s commitment to building world-class research capabilities, leveraging partnerships to enhance its competitive edge and solidify its presence as a leader in AM technologies,” said G. Jeremy Leong, director of the Advanced Manufacturing Collaborative at SRNL.
In addition to technology development, the partnership expands opportunities for training and developing the next generation of AM scientists, engineers, and technicians, strengthening the regional and national advanced manufacturing workforce.
About the Advanced Manufacturing Collaborative and SRNL
SRNL’s Advanced Manufacturing Collaborative opened just one year ago with a bold purpose and a clear vision as a nexus of innovation. Today, the AMC stands proudly as a place where industry, academia, and government come together to pioneer technologies that advance national security, environmental stewardship, and energy resilience. It has quickly become a home where collaboration thrives, integration drives impact, and ideas are transformed into purposeful solutions real world solutions for the nation. The AMC officially opened on August 7, 2025.
Savannah River National Laboratory is a multi-program federally funded research and development center managed and operated by Battelle Savannah River Alliance for the U.S. Department of Energy’s Office of Environmental Management. EM transforms the nation’s environmental liabilities into opportunities for innovation, job creation, and economic growth, while ensuring safe, secure and prosperous communities across America.
About 3D Systems
For 40 years, Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials, and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future. More information on the company is available at www.3dsystems.com.
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including statements regarding the timing of product launches, regulatory approvals, market opportunities, expected revenue impact, and shareholder value. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward-looking statements can be identified by terms such as “believes,” “belief,” “expects,” “may,” “will,” “estimates,” “intends,” “anticipates” or “plans” or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions, and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings “Forward-Looking Statements” and “Risk Factors” in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not, be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.
1 “The Path to a New Era for Nuclear Energy”. International Energy Agency, (iea) January 13, 2025
Shares of 3D Systems Corporation (NYSE:DDD – Get Free Report) crossed above its 200-day moving average during trading on Thursday . The stock has a 200-day moving average of $2.64 and traded as high as $3.39. 3D Systems shares last traded at $3.20, with a volume of 1,998,331 shares traded.
Analyst Ratings Changes DDD has been the topic of several research analyst reports. Weiss Ratings lowered 3D Systems from a “sell (d+)” rating to a “sell (d-)” rating in a research note on Tuesday, August 4th. Craig Hallum raised shares of 3D Systems from a “hold” rating to a “buy” rating and set a $6.00 target price for the company in a report on Tuesday, August 4th. Finally, Cantor Fitzgerald restated an “overweight” rating and issued a $5.00 price target on shares of 3D Systems in a research note on Wednesday, May 13th. Three analysts have rated the stock with a Buy rating, one has given a Hold rating and one has given a Sell rating to the company’s stock. According to MarketBeat, 3D Systems currently has a consensus rating of “Hold” and an average target price of $5.50.
Get Our Latest Stock Report on DDD
3D Systems Stock Down 6.2% The company has a market capitalization of $531.68 million, a price-to-earnings ratio of -7.80 and a beta of 2.73. The company has a debt-to-equity ratio of 0.32, a current ratio of 3.40 and a quick ratio of 2.27. The firm’s fifty day moving average price is $3.09 and its 200-day moving average price is $2.64. 3D Systems (NYSE:DDD – Get Free Report) last released its quarterly earnings data on Monday, August 3rd. The 3D printing company reported ($0.04) earnings per share for the quarter, beating the consensus estimate of ($0.06) by $0.02. 3D Systems had a negative return on equity of 19.56% and a negative net margin of 14.15%.The company had revenue of $94.60 million for the quarter, compared to the consensus estimate of $94.01 million. Sell-side analysts expect that 3D Systems Corporation will post -0.32 earnings per share for the current fiscal year.
Institutional Inflows and Outflows Several institutional investors and hedge funds have recently made changes to their positions in the company. J. Derek Lewis & Associates Inc. acquired a new stake in 3D Systems during the 4th quarter worth approximately $27,000. Prudential Financial Inc. raised its stake in shares of 3D Systems by 74.8% during the second quarter. Prudential Financial Inc. now owns 18,427 shares of the 3D printing company’s stock valued at $28,000 after acquiring an additional 7,887 shares during the last quarter. NewEdge Advisors LLC lifted its holdings in shares of 3D Systems by 5,139.4% during the first quarter. NewEdge Advisors LLC now owns 13,151 shares of the 3D printing company’s stock worth $28,000 after purchasing an additional 12,900 shares during the period. CIBC Asset Management Inc acquired a new position in shares of 3D Systems during the fourth quarter worth $36,000. Finally, CIBC Bancorp USA Inc. bought a new stake in shares of 3D Systems in the third quarter worth $41,000. Institutional investors and hedge funds own 64.49% of the company’s stock.
About 3D Systems (Get Free Report)
3D Systems, founded in 1986 by stereolithography pioneer Chuck Hull, is a leading provider of additive manufacturing solutions. Headquartered in Rock Hill, South Carolina, the company develops and sells a broad range of 3D printers, materials, software, and on-demand manufacturing services. Its core technologies include stereolithography (SLA), selective laser sintering (SLS), direct metal printing (DMP), and multi-jet printing (MJP), enabling customers to build prototypes, production parts, and complex geometries across a variety of industries.
The company’s hardware portfolio spans desktop to production-scale systems designed for applications in aerospace, automotive, healthcare, consumer products, and education.
Further Reading Five stocks we like better than 3D Systems 3 Energy Stocks Raising Dividends as the Sector Surges 5 Reasons the S&P 500 Could Keep Rallying Through Year-End Walmart’s Post-Earnings Drop Could Be a Buying Opportunity The Trade Desk’s Earnings Miss Raises a Bigger Question About Its AI Future Receive News & Ratings for 3D Systems Daily - Enter your email address below to receive a concise daily summary of the latest news and analysts' ratings for 3D Systems and related companies with MarketBeat.com's FREE daily email newsletter.
Dimensional Fund Advisors LP increased its stake in 3D Systems Corporation (NYSE:DDD – Free Report) by 20.5% during the first quarter, according to the company in its most recent disclosure with the Securities and Exchange Commission (SEC). The firm owned 1,881,311 shares of the 3D printing company’s stock after acquiring an additional 320,427 shares during the quarter. Dimensional Fund Advisors LP owned about 1.29% of 3D Systems worth $3,537,000 at the end of the most recent reporting period.
Several other institutional investors have also added to or reduced their stakes in DDD. J. Derek Lewis & Associates Inc. acquired a new stake in 3D Systems during the 4th quarter valued at approximately $27,000. NewEdge Advisors LLC lifted its position in shares of 3D Systems by 5,139.4% in the 1st quarter. NewEdge Advisors LLC now owns 13,151 shares of the 3D printing company’s stock worth $28,000 after purchasing an additional 12,900 shares during the period. Prudential Financial Inc. boosted its stake in shares of 3D Systems by 74.8% in the 2nd quarter. Prudential Financial Inc. now owns 18,427 shares of the 3D printing company’s stock valued at $28,000 after purchasing an additional 7,887 shares during the last quarter. CIBC Asset Management Inc bought a new stake in shares of 3D Systems in the 4th quarter valued at $36,000. Finally, CIBC Bancorp USA Inc. acquired a new stake in shares of 3D Systems during the third quarter worth $41,000. 64.49% of the stock is currently owned by institutional investors.
Analyst Ratings Changes Several research firms recently issued reports on DDD. Weiss Ratings lowered shares of 3D Systems from a “sell (d+)” rating to a “sell (d-)” rating in a report on Tuesday, August 4th. Craig Hallum upgraded 3D Systems from a “hold” rating to a “buy” rating and set a $6.00 price target for the company in a report on Tuesday, August 4th. Finally, Cantor Fitzgerald restated an “overweight” rating and set a $5.00 target price on shares of 3D Systems in a research report on Wednesday, May 13th. Three equities research analysts have rated the stock with a Buy rating, one has given a Hold rating and one has issued a Sell rating to the stock. Based on data from MarketBeat.com, the company has a consensus rating of “Hold” and a consensus target price of $5.50.
Get Our Latest Stock Report on DDD
3D Systems Stock Down 5.0% 3D Systems stock opened at $3.62 on Thursday. The company has a quick ratio of 2.27, a current ratio of 3.40 and a debt-to-equity ratio of 0.32. 3D Systems Corporation has a 12-month low of $1.70 and a 12-month high of $4.12. The firm’s fifty day moving average is $3.02 and its 200 day moving average is $2.60. The company has a market capitalization of $601.46 million, a PE ratio of -8.83 and a beta of 2.73.
3D Systems (NYSE:DDD – Get Free Report) last issued its earnings results on Monday, August 3rd. The 3D printing company reported ($0.04) earnings per share (EPS) for the quarter, topping the consensus estimate of ($0.06) by $0.02. 3D Systems had a negative net margin of 14.15% and a negative return on equity of 19.56%. The business had revenue of $94.60 million for the quarter, compared to analyst estimates of $94.01 million. As a group, sell-side analysts predict that 3D Systems Corporation will post -0.33 EPS for the current fiscal year.
3D Systems Profile (Free Report)
3D Systems, founded in 1986 by stereolithography pioneer Chuck Hull, is a leading provider of additive manufacturing solutions. Headquartered in Rock Hill, South Carolina, the company develops and sells a broad range of 3D printers, materials, software, and on-demand manufacturing services. Its core technologies include stereolithography (SLA), selective laser sintering (SLS), direct metal printing (DMP), and multi-jet printing (MJP), enabling customers to build prototypes, production parts, and complex geometries across a variety of industries.
The company’s hardware portfolio spans desktop to production-scale systems designed for applications in aerospace, automotive, healthcare, consumer products, and education.
Featured Stories Five stocks we like better than 3D Systems GE Vernova’s AI Power Boom Faces a Profit Test Cardinal Health Earnings: Can Perfection Get Priced In Twice? Nebius’ Q2 Beat Shows the AI Bottleneck Is Capacity, Not Demand Legacy Jet Builders Stall While Embraer Accelerates to New Highs
Receive News & Ratings for 3D Systems Daily - Enter your email address below to receive a concise daily summary of the latest news and analysts' ratings for 3D Systems and related companies with MarketBeat.com's FREE daily email newsletter.
« PREVIOUS HEADLINEDimensional Fund Advisors LP Purchases 281,833 Shares of Alto Ingredients, Inc. $ALTO
NEXT HEADLINE »Dimensional Fund Advisors LP Reduces Stake in Myriad Genetics, Inc. $MYGN
3D Systems Corporation outlook has improved due to a demand recovery in dental, manufacturing CapEx, and defense. While Q3 guidance is soft, 3D Systems' core business is likely to continue accelerating in coming quarters. Cost-cutting efforts and operating leverage should see 3D Systems' approach breakeven in coming quarters. Long-term profitability remains a key uncertainty though.
Immersion Stock Surges as It Monetizes Haptic Technology Patents3D Systems NYSE: DDD reported second-quarter revenue growth, a sharp increase in printer sales and improved adjusted EBITDA as demand strengthened across its targeted healthcare and industrial markets. The company also disclosed that President and Chief Executive Officer Jeffrey Graves plans to conclude his service as CEO following a succession process that has recently begun.
Revenue for the second quarter totaled $94.6 million, up 1.4% from a year earlier, according to Chief Financial Officer Phyllis Nordstrom. Hardware printer sales rose more than 40% year over year and more than 20% sequentially, supported by demand for newer polymer and metal platforms. Non-GAAP adjusted EBITDA was a loss of $800,000, improving by $3.9 million from the prior-year period, while non-GAAP earnings per share were negative $0.04, an improvement of $0.02 per share.
Get 3D Systems alerts:
Printer Sales Drive Growth in Priority Markets Stratasys Remains the Belle of the 3D Printing BallGraves said customer capital spending has begun to return in key markets, coinciding with the company’s multiyear product portfolio refresh. Printer sales increased by more than 45% during the quarter, led by the DMP 350 metal-printing system, the SLA 825 polymer platform and MultiJet systems used in the company’s denture offering.
Sales of the DMP 350 and SLA 825 platforms grew roughly 90% and 125%, respectively, year over year in the second quarter, Graves said. The SLA 825 is intended for high-quality patterns used in metal casting, while the DMP 350 is a direct-metal printing platform.
Will Stratasys Continue to be a Runaway Bride? The company’s four stated priority markets are medical technology, dental, aerospace and defense, and data center infrastructure. Nordstrom said each of those markets delivered more than 20% year-over-year growth in the first half of 2026.
Healthcare Solutions revenue was $48.1 million, up 6.8% year over year. Industrial Solutions revenue was $46.5 million, down 3.7% year over year but up 2.4% sequentially. First-half revenue increased 6% year over year, with healthcare revenue up 14% and industrial revenue down 1%. Healthcare growth reflected demand for metal printers used in orthopedic implant production, growth in surgical planning and trauma applications within the company’s Personalized Healthcare Solutions business, and increased dental revenue. Industrial revenue was affected by the prior closure of a non-core product offering and lower services revenue from legacy systems, Nordstrom said.
Space, Data Centers and Dental Highlight Demand In aerospace and defense, Graves said 3D Systems received one of the largest industrial printer orders in its history during the second quarter. The multiquarter order is tied to casting patterns for next-generation reusable rocket engines. Some units shipped in the second quarter, with additional deliveries expected over future quarters.
Graves said the company is benefiting from demand for components supporting advanced rocket engines, where additive manufacturing is used for direct metal parts and high-precision investment castings made from 3D-printed patterns.
Data center infrastructure revenue grew more than 20% year over year in the second quarter, driven primarily by demand for metal parts used in airflow and thermal-management components for semiconductor manufacturing equipment. Graves said the company participates in this market by selling both metal-printed components and printer systems to customers.
The company is also expanding work in energy-related applications. During the quarter, 3D Systems executed a cooperative research and development agreement with Savannah River National Laboratory to collaborate on materials, component design, manufacturing and artificial intelligence-enabled process optimization for nuclear fission and fusion environments.
In dental, Graves highlighted adoption of the NextDent 300 denture printer, which launched in late 2025 after FDA clearance and received full EU MDR approval in the second quarter. The company expects to have printers installed in more than 100 dental labs by year-end. Graves said initial installed printers are expected to generate more than $2 million in annual recurring revenue, though the company’s current penetration represents less than 2% of the U.S. and European denture markets.
Capacity Expansion and Cost Actions To support demand for finished metal parts, 3D Systems is expanding production capacity in Leuven, Belgium, and Littleton, Colorado. The company is adding about 50,000 square feet of parts-production space in Littleton, raising total metal-printing space to more than 270,000 square feet. The grand opening is targeted for the fall.
Graves said the company currently has 77 metal printers in production and 42 polymer printers used primarily for its med-tech business. The company sold more metal printers in the first half of 2026 than it did in all of 2025, he said.
Second-quarter non-GAAP gross margin was 36.7%. Nordstrom said margin results reflected a higher mix of hardware sales, less favorable materials mix and comparison with a regenerative medicine milestone recognized in the prior-year quarter. Those pressures were partly offset by cost reductions and $2.6 million in tariff refunds.
Non-GAAP operating expenses declined 11% year over year to $39.5 million. The company completed a six-quarter cost-reduction initiative that generated more than $60 million in annualized savings through facility optimization, operating-model changes and lower ongoing costs.
3D Systems ended the quarter with $129 million in cash equivalents and restricted cash. During the quarter, it completed an equity offering that generated net proceeds of just over $53 million. Total debt was $96 million, including $3.9 million due in the fourth quarter of 2026 and $92 million maturing in 2030.
Third-Quarter Outlook and CEO Transition For the third quarter, the company forecast revenue of $96 million to $99 million and adjusted EBITDA of negative $3 million to negative $1 million. Nordstrom said the back half of the year is expected to have a heavier mix of printer sales, particularly in the fourth quarter, which could affect gross margins. She said operating expenses are expected to remain broadly consistent with first-half levels.
Graves said the board has begun a CEO succession process and that he expects to remain in the role for months while supporting the transition. He said the timing reflects what he views as a stronger operational position following cost reductions, product introductions and a renewed focus on the company’s four growth markets.
“The hard work’s done of leaning out the company, getting the portfolio refreshed, and focusing on the core markets,” Graves said. “We’re ready to rock, and we’ve got cash on the balance sheet to do it.”
About 3D Systems (NYSE:DDD)3D Systems, founded in 1986 by stereolithography pioneer Chuck Hull, is a leading provider of additive manufacturing solutions. Headquartered in Rock Hill, South Carolina, the company develops and sells a broad range of 3D printers, materials, software, and on-demand manufacturing services. Its core technologies include stereolithography (SLA), selective laser sintering (SLS), direct metal printing (DMP), and multi-jet printing (MJP), enabling customers to build prototypes, production parts, and complex geometries across a variety of industries.
The company's hardware portfolio spans desktop to production-scale systems designed for applications in aerospace, automotive, healthcare, consumer products, and education.
This instant news alert was generated by narrative science technology and financial data from MarketBeat in order to provide readers with the fastest reporting and unbiased coverage. Please send any questions or comments about this story to [email protected].
Continue following MarketBeat
Add MarketBeat as your preferred source on Google to see our latest stories in your feed.
Should You Invest $1,000 in 3D Systems Right Now?Before you consider 3D Systems, you'll want to hear this.
MarketBeat keeps track of Wall Street's top-rated and best performing research analysts and the stocks they recommend to their clients on a daily basis. MarketBeat has identified the five stocks that top analysts are quietly whispering to their clients to buy now before the broader market catches on... and 3D Systems wasn't on the list.
While 3D Systems currently has a Hold rating among analysts, top-rated analysts believe these five stocks are better buys.
View The Five Stocks Here
Click the link to see MarketBeat's list of seven stocks and why their long-term outlooks are very promising.
Key Takeaways 3D Systems' Q2 loss narrowed to 4 cents per share as revenues reached $94.6 million.New printer sales drove 6.8% healthcare growth, led by more than 20% Med Tech gains.Gross margin fell 170 bps, but cost cuts and tariff refunds improved adjusted EBITDA. 3D Systems (DDD - Free Report) reported a second-quarter 2026 non-GAAP loss of 4 cents per share, narrower than the year-ago loss of 6 cents and beat the Zacks Consensus Estimate by 55.56%.
Revenues slipped 0.3% year over year to $94.6 million but surpassed the consensus mark by 0.48%. Double-digit growth in metal and polymer printer systems, along with strength in key healthcare and industrial markets, supported the quarter.
Adjusted for software divestitures completed in 2025, total revenues increased 1.4% year over year. The improvement reflected accelerating sales of newly launched printers as customers expanded their use of additive manufacturing across production applications.
DDD’s Printer Sales Support Core GrowthProduct revenues rose 1.9% year over year to $54.8 million, while services revenues declined 3.2% to $39.7 million. 3D Systems highlighted double-digit growth in both metal and polymer hardware printer systems, underscoring improving demand for the company’s refreshed equipment portfolio.
Healthcare Solutions revenues increased 6.8% year over year to $48.1 million, making the segment the company’s largest business during the reported quarter. Growth was driven primarily by higher sales of new printer systems in Med Tech and continued expansion in Personalized Healthcare Services.
Med Tech revenues grew more than 20%, while Dental revenues increased 3%. Management said customers in these markets continued adopting 3D printing as a core manufacturing technology and broadening the range of applications deployed.
However, Industrial Solutions revenues declined 6.7% year over year to $46.5 million. Excluding the impact of software divestitures, the segment’s revenues decreased 3.7% year over year, reflecting the exit of a non-core product offering and lower hardware services revenues. Sequentially, Industrial revenues increased 2.4% on higher product sales.
Aerospace & Defense and Data Center Infrastructure each delivered growth of more than 20%, helping offset weakness elsewhere in the portfolio. Aerospace & Defense remained the company’s largest industrial market.
3D Systems’ Margin Pressure Offsets Cost CutsGross profit fell to $34.5 million from $36.2 million reported in the year-ago quarter. Gross margin contracted 170 basis points (bps) to 36.4%, while non-GAAP gross margin excluding software divestitures declined 150 bps to 36.7%.
The margin decline reflected a greater mix of printer sales and certain pricing pressures. These headwinds were partly offset by approximately $2.6 million in tariff refunds recovered during the quarter.
Operating expenses decreased 12.4% year over year to $45.1 million. Research and development expenses dropped to $10 million from $17.4 million, while selling, general and administrative expenses increased to $35.1 million from $34.1 million.
Adjusted EBITDA improved to a loss of $0.8 million from a loss of $4.7 million on a comparable basis. Prior cost-reduction measures and tariff refunds supported the improvement.
3D Systems Strengthens Its Liquidity PositionTotal cash stood at $129 million at June 30, including $128 million in cash and cash equivalents.
The company has $3.9 million of debt principal maturing in the fourth quarter of 2026, with the remaining $92 million due in 2030.
DDD Issues Third-Quarter OutlookFor the third quarter of 2026, 3D Systems expects revenues between $96 million and $99 million. The range is above the second-quarter revenue level and points to continued momentum from new printer introductions and priority end markets.
Adjusted EBITDA is projected between a loss of $3 million and a loss of $1 million. Management remains focused on Med Tech, Dental, Aerospace & Defense and Data Center Infrastructure, all of which recorded growth exceeding 20% during the first half of 2026.
Zacks Rank & Stocks to ConsiderCurrently, 3D Systems has a Zacks Rank #3 (Hold).
LegalZoom.com (LZ - Free Report) , Alarm.com (ALRM - Free Report) and Applied Industrial Technologies (AIT - Free Report) are some better-ranked stocks in the broader Zacks Industrial Products sector. LegalZoom.com, Alarm.com, and Applied Industrial Technologies carry a Zacks Rank #2 (Buy) each. You can see the complete list of today’s Zacks #1 Rank (Strong Buy) stocks here.
LegalZoom.com, Alarm.com, and Applied Industrial Technologies are expected to report their quarterly results on Aug. 5, 6, and 13, respectively. Shares of Applied Industrial Technologies and Alarm.com have jumped 37.8% and 8.9%, respectively, while shares of LegalZoom.com have dropped 16.6%, year to date.
3D Systems Corporation (DDD) Q2 2026 Earnings Call August 4, 2026 8:30 AM EDT
Company Participants
Jeffrey Graves - President, CEO & Director
Phyllis Nordstrom - Executive VP, CFO & Chief Administrative Officer
Conference Call Participants
Monica Gould - The Blueshirt Group, LLC
James Ricchiuti - Needham & Company, LLC, Research Division
Greg Palm - Craig-Hallum Capital Group LLC, Research Division
Kieran McCabe - Cantor Fitzgerald & Co., Research Division
Presentation
Operator
Greetings, and welcome to the 3D Systems Q2 2026 Earnings Webcast. [Operator Instructions] As a reminder, this conference is being recorded. [Operator Instructions]
It's now my pleasure to turn the call over to Vice President, Investor Relations, Monica Gould. Monica, please go ahead.
Monica Gould
The Blueshirt Group, LLC
Hello, and welcome to 3D Systems Second Quarter 2026 Earnings Conference Call. With me on today's call are Dr. Jeffrey Graves, President and CEO; and Phyllis Nordstrom, Chief Financial Officer.
The webcast portion of this call contains a slide presentation that we will refer to during the call. Those following along on the phone who wish to access the slide portion of this presentation may do so on the Investor Relations section of our website.
The following discussion and responses to your questions reflect management's views as of today only and will include forward-looking statements as described on this slide. Actual results may differ materially. Additional information about factors that could potentially impact our financial results is included in our latest press release and our filings with the SEC, including our most recent annual report on Form 10-K and quarterly reports on Form 10-Q.
During this call, we will discuss certain non-GAAP financial measures. In our press release and slides accompanying this webcast, you will find additional disclosures regarding these non-GAAP measures, including reconciliations with comparable GAAP measures.
ROCK HILL, S.C., Aug. 04, 2026 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD), a leading provider of additive manufacturing solutions, today announced a leadership transition plan in which Dr. Jeffrey Graves will step down as President and Chief Executive Officer and retire from the Board of Directors.
3D Systems (DDD - Free Report) came out with a quarterly loss of $0.04 per share versus the Zacks Consensus Estimate of a loss of $0.09. This compares to a loss of $0.07 per share a year ago. These figures are adjusted for non-recurring items.
This quarterly report represents an earnings surprise of +55.56%. A quarter ago, it was expected that this maker of 3D printers would post a loss of $0.09 per share when it actually produced a loss of $0.01, delivering a surprise of +88.89%.
Over the last four quarters, the company has surpassed consensus EPS estimates three times.
3D Systems, which belongs to the Zacks Commercial Printing industry, posted revenues of $94.58 million for the quarter ended June 2026, surpassing the Zacks Consensus Estimate by 0.48%. This compares to year-ago revenues of $94.84 million. The company has topped consensus revenue estimates three times over the last four quarters.
The sustainability of the stock's immediate price movement based on the recently-released numbers and future earnings expectations will mostly depend on management's commentary on the earnings call.
3D Systems shares have added about 49.2% since the beginning of the year versus the S&P 500's gain of 9.4%.
What's Next for 3D Systems?While 3D Systems has outperformed the market so far this year, the question that comes to investors' minds is: what's next for the stock?
There are no easy answers to this key question, but one reliable measure that can help investors address this is the company's earnings outlook. Not only does this include current consensus earnings expectations for the coming quarter(s), but also how these expectations have changed lately.
Empirical research shows a strong correlation between near-term stock movements and trends in earnings estimate revisions. Investors can track such revisions by themselves or rely on a tried-and-tested rating tool like the Zacks Rank, which has an impressive track record of harnessing the power of earnings estimate revisions.
Ahead of this earnings release, the estimate revisions trend for 3D Systems was mixed. While the magnitude and direction of estimate revisions could change following the company's just-released earnings report, the current status translates into a Zacks Rank #3 (Hold) for the stock. So, the shares are expected to perform in line with the market in the near future. You can see the complete list of today's Zacks #1 Rank (Strong Buy) stocks here.
It will be interesting to see how estimates for the coming quarters and the current fiscal year change in the days ahead. The current consensus EPS estimate is -$0.08 on $94.64 million in revenues for the coming quarter and -$0.19 on $386.76 million in revenues for the current fiscal year.
Investors should be mindful of the fact that the outlook for the industry can have a material impact on the performance of the stock as well. In terms of the Zacks Industry Rank, Commercial Printing is currently in the top 38% of the 250 plus Zacks industries. Our research shows that the top 50% of the Zacks-ranked industries outperform the bottom 50% by a factor of more than 2 to 1.
Kornit Digital (KRNT - Free Report) , another stock in the same industry, has yet to report results for the quarter ended June 2026. The results are expected to be released on August 12.
This digital textile printer is expected to post quarterly loss of $0.02 per share in its upcoming report, which represents a year-over-year change of -166.7%. The consensus EPS estimate for the quarter has remained unchanged over the last 30 days.
Kornit Digital's revenues are expected to be $53.15 million, up 6.8% from the year-ago quarter.
ROCK HILL, S.C., Aug. 03, 2026 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the second quarter ended June 30, 2026.
Q2 2026 revenue of $94.6 million, down 0.3% year-over-year, but up 1.4% excluding divestitures, driven by continued acceleration of new printer sales, with double-digit growth in both metal and polymer hardware printer systems.Net loss was $(12.9) million for the quarter, while Adjusted EBITDA improved to a loss of $(0.8) million, reflecting benefits from previous cost reduction initiatives. For the first half of 2026, the Company reported a net loss of $(17.3) million and positive Adjusted EBITDA of $1.3 million.Healthcare continued as the Company's largest segment in the quarter, with revenue increasing 6.8% year-over-year, supported by over 20% growth in Med Tech and 3% growth in Dental.Industrial revenue declined 6.7% year-over year, or 3.7% excluding divestitures, while increasing 2.4% sequentially, driven by higher product sales and over 20% growth in Aerospace & Defense, our largest Industrial market, and Data Center Infrastructure.We remain focused on our four priority markets which all delivered more than 20% growth in the first half of 2026: Med Tech, Dental, Aerospace & Defense, and Data Center Infrastructure. Summary of Financial Results
(Unaudited)
Three Months Ended Six Months Ended(in millions, except per share data)June 30, 2026 June 30, 2025 June 30, 2026 June 30, 2025Revenue$94.6 $94.8 $190.1 $189.4 Gross profit 34.5 36.2 68.8 68.8 Gross profit margin 36.4% 38.1% 36.2% 36.4%Operating expense 45.1 51.5 86.1 121.0 Operating loss (10.6) (15.4) (17.3) (52.1)Net (loss) income attributable to 3D Systems Corporation (12.9) 104.4 (17.3) 67.5 Diluted (loss) income per share (0.09) 0.57 (0.12) 0.37 Non-GAAP measures, excluding divestitures for year-over-year comparisons Non-GAAP revenue 94.6 93.3 190.1 179.3 Non-GAAP gross profit margin 36.7% 38.2% 36.4% 34.3%Non-GAAP operating expense 39.5 44.6 76.1 101.2 Adjusted EBITDA (0.8) (4.7) 1.3 (30.8)Non-GAAP diluted loss per share$(0.04) $(0.06) $(0.05) $(0.23) Summary Comments on Results
Dr. Jeffrey Graves, President and Chief Executive Officer of 3D Systems, said, “We are pleased with our second-quarter and first-half performance on both the top and bottom line. Revenue growth was driven by strength in our four key markets: Med Tech and Dental in Healthcare, and Aerospace & Defense and Data Center Infrastructure in Industrial. Data Center Infrastructure is an emerging focus area for us and includes applications in chip manufacturing equipment and high-performance computing. Customers in these markets continue to adopt 3D printing as a core manufacturing technology and are expanding the range of applications they deploy. This performance highlights the market-leading breadth of our additive manufacturing portfolio, spanning direct metal printing and all five major polymer technologies, combined with our deep expertise in advanced applications. Of particular note is the growing impact of metal 3D printing, where design flexibility combined with cost-effective production is enabling higher-performance components and systems.”
Dr. Graves concluded, “As the additive manufacturing industry continues to emerge from a multi-year downturn, our sustained investments in research and development are now enabling us to introduce a broad portfolio of new products that are gaining increasing customer traction. While the global economic environment remains uncertain, we are optimistic that, as capital investment activity strengthens, we are well positioned to benefit from the resulting expansion in global manufacturing capacity.”
“Adjusting for divestitures completed in 2025, total revenue increased 1.4% year over year and 6% for the first half of 2026, demonstrating continued core revenue growth in the year” said Phyllis Nordstrom, Chief Financial Officer of 3D Systems. “Strong growth in our key markets along with accelerated growth in new printer launches contributed to our success in the quarter. We continue to focus on refreshing our installed base as well as expanding our parts manufacturing capabilities to drive greater margin expansion and profitability as we look ahead.”
Second Quarter 2026 Results
Total revenue decreased 0.3% to $94.6 million compared to the prior year period. Adjusting for software divestitures completed in 2025, including Geomagic, 3DXpert and Oqton, total revenue increased by 1.4%.
Healthcare Solutions revenue increased approximately 6.8% to $48.1 million compared to the prior year period. Revenue growth was primarily driven by higher sales of new printer systems in Med Tech and continued growth in Personalized Healthcare Services.
Industrial Solutions revenue decreased approximately 6.7% to $46.5 million compared to the prior year period. Adjusting for divestitures, Industrial Solutions revenue decreased 3.7% year over year. The decline was primarily driven by the absence of revenue from a non-core product offering exited in the prior year and lower hardware services revenue.
Gross profit margin decreased to 36.4% compared to 38.1% in the prior year period. Non-GAAP gross profit margin decreased to 36.7% compared to 39.2% in the prior year period. Adjusting for software divestitures, non-GAAP gross profit margin decreased by 150 basis points. Gross profit was impacted by product mix, reflecting higher printer sales and select pricing impacts, partially offset by approximately $2.6 million of tariff refunds recovered in the quarter.
Net income attributable to 3D Systems Corporation decreased by $117.3 million to a loss of $(12.9) million compared to the prior year period. The decrease was primarily related to the gain on the sale of Geomagic and the gain on debt extinguishment recorded in the prior-year period, partially offset by improved operating margins and a lower income tax provision in the current period.
Adjusted EBITDA improved by $4.6 million, to $(0.8) million compared to the prior year period, driven primarily by the impact of prior cost reduction initiatives and the impact of tariff refunds recovered in the quarter. Adjusting for software divestitures, Adjusted EBITDA improved $3.9 million.
Financial Liquidity
During the second quarter 2026, the Company issued 18.9 million shares of common stock, par value $0.001 per share, for $53.2 million in cash, net of offering costs. At June 30, 2026, the Company had total cash of $129.0 million, which included cash and cash equivalents of $128.0 million and restricted cash of $1.0 million. A total of $3.9 million in principal amount of debt is scheduled to mature in the fourth quarter of 2026, with the remaining $92.0 million principal maturing in 2030.
Third Quarter 2026 Outlook
Revenue:$96 - $99 million Adjusted EBITDA: ($3) million - ($1) million 3D Systems does not provide forward-looking guidance for certain measures on a GAAP basis. The Company is unable to provide a quantitative reconciliation of forward-looking Adjusted EBITDA to the most directly comparable forward-looking GAAP measures without unreasonable effort because certain items, including litigation expenses, acquisition expenses, stock-based compensation expense, intangible amortization expense, restructuring expenses, and goodwill impairment, are difficult to predict and estimate. These items are inherently uncertain and depend on various factors, many of which are beyond the Company’s control, and as such, any associated estimate and its impact on GAAP performance could vary materially.
Second Quarter 2026 Conference Call and Webcast
The Company will host a conference call and simultaneous webcast to discuss these results on August 4, 2026, which may be accessed as follows:
Date: Tuesday, August 4, 2026
Time: 8:30 a.m. Eastern Time
Listen via webcast: www.3dsystems.com/investor
Participate via telephone: 877-407-8291 or 201-689-8345
A replay of the webcast will be available approximately two hours after the live presentation at www.3dsystems.com/investor.
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 including statements regarding the timing of product launches, regulatory approvals, market opportunities, expected revenue impact, and shareholder value. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the Company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward-looking statements can be identified by terms such as "believes," "belief," "expects," "may," "will," "estimates," "intends," "anticipates" or "plans" or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions, and current expectations and may include comments as to the Company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the Company. The factors described under the headings "Forward-Looking Statements" and "Risk Factors" in the Company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.
About 3D Systems
Nearly 40 years ago, Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future. More information on the Company is available at www.3dsystems.com.
3D SYSTEMS CORPORATION
Condensed Consolidated Balance Sheets
(Unaudited) (in thousands, except par value)June 30, 2026 December 31, 2025ASSETS Current assets: Cash and cash equivalents$127,951 $95,635 Accounts receivable, net of reserves — $5,719 and $3,608 80,174 83,806 Inventories 121,847 127,496 Prepaid expenses and other current assets 35,639 39,770 Total current assets 365,611 346,707 Property and equipment, net 49,697 49,249 Intangible assets, net 15,646 16,614 Goodwill 15,404 15,575 Operating lease right-of-use assets 41,170 45,364 Finance lease right-of-use assets 7,160 7,774 Long-term deferred income tax assets 2,443 2,787 Other assets 38,113 37,658 Total assets$535,244 $521,728 LIABILITIES, REDEEMABLE NON-CONTROLLING INTEREST AND EQUITY Current liabilities: Current portion of long-term debt, net of deferred financing costs$3,944 $3,944 Current operating lease liabilities 9,266 11,583 Accounts payable 32,425 41,017 Accrued and other liabilities 39,781 46,656 Customer deposits and deferred revenue 22,182 17,423 Total current liabilities 107,598 120,623 Long-term debt, net of deferred financing costs 87,240 86,394 Long-term operating lease liabilities 41,238 45,420 Long-term deferred income tax liabilities 2,818 2,740 Other liabilities 22,787 24,000 Total liabilities 261,681 279,177 Commitments and contingencies Redeemable non-controlling interest — 2,193 Stockholders’ equity: Preferred stock, 5,000 shares authorized; $0.001 par value; no shares issued and outstanding as of June 30, 2026 and December 31, 2025 — — Common stock, $0.001 par value, authorized 220,000 shares; shares issued 166,149 and 145,581 as of June 30, 2026 and December 31, 2025, respectively 166 146 Additional paid-in capital 1,677,775 1,620,399 Accumulated deficit (1,349,645) (1,332,360)Accumulated other comprehensive loss (54,733) (47,827)Total stockholders’ equity 273,563 240,358 Total liabilities, redeemable non-controlling interest and stockholders’ equity$535,244 $521,728 3D SYSTEMS CORPORATION
Condensed Consolidated Statements of Operations
(Unaudited)
Three Months Ended Six Months Ended(in thousands, except per share amounts)June 30, 2026 June 30, 2025 June 30, 2026 June 30, 2025Revenue: Products$54,842 $53,801 $112,610 $108,524 Services 39,737 41,037 77,507 80,854 Total revenue 94,579 94,838 190,117 189,378 Cost of sales: Products 35,845 32,274 71,932 69,639 Services 24,272 26,414 49,380 50,900 Total cost of sales 60,117 58,688 121,312 120,539 Gross profit 34,462 36,150 68,805 68,839 Operating expenses: Selling, general and administrative 35,135 34,139 66,483 83,908 Research and development 9,972 17,361 19,607 37,044 Total operating expenses 45,107 51,500 86,090 120,952 Loss from operations (10,645) (15,350) (17,285) (52,113)Non-operating (loss) income: Foreign exchange gain (loss), net 1,464 (1,591) 4,102 (452)Interest income 575 1,717 1,159 2,670 Interest expense (2,155) (697) (4,319) (1,278)Gain on disposition — 125,681 — 125,681 Other (loss) income, net (839) 7,020 2,689 6,860 Total non-operating (loss) income (955) 132,130 3,631 133,481 Net (loss) income before income taxes (11,600) 116,780 (13,654) 81,368 Provision for income taxes (354) (11,018) (1,837) (11,689)Loss on equity method investments, net of income taxes (907) (1,326) (1,953) (2,229)Net (loss) income before redeemable non-controlling interest (12,861) 104,436 (17,444) 67,450 Less: net loss attributable to redeemable non-controlling interest — — (159) — Net (loss) income attributable to 3D Systems Corporation$(12,861) $104,436 $(17,285) $67,450 Net (loss) income per common share: Basic$(0.09) $0.79 $(0.12) $0.51 Diluted$(0.09) $0.57 $(0.12) $0.37 Weighted average shares outstanding: Basic 148,968 132,280 146,130 132,370 Diluted 148,968 182,716 146,130 183,237 3D SYSTEMS CORPORATION
Condensed Consolidated Statements of Cash Flows
(Unaudited)
Six Months Ended(in thousands)June 30, 2026 June 30, 2025OPERATING ACTIVITIES Net (loss) income before redeemable non-controlling interest$(17,444) $67,450 Adjustments to reconcile net (loss) income to net cash used in operating activities: Depreciation and amortization 10,186 10,907 Amortization of debt issuance costs 1,023 652 Stock-based compensation 4,615 607 Non-cash operating lease expense 6,105 2,371 Provision for inventory obsolescence 4,453 2,130 Provision for bad debts 2,348 1,622 Gain on the disposition of businesses, property, equipment and other assets (95) (125,825)Gain on debt extinguishment — (8,203)Provision for deferred income taxes and reserve adjustments 714 (3,124)Gain on disposal of investment (2,576) — Loss on equity method investment, net of taxes 1,953 2,229 Changes in operating accounts: Accounts receivable (2,966) 9,394 Inventories (2,588) (11,137)Prepaid expenses and other current assets 3,161 (6,362)Accounts payable (8,761) (8,142)Deferred revenue and customer deposits 8,285 7,094 Accrued and other liabilities (9,521) 5,009 All other operating activities (12,998) (6,302)Net cash used in operating activities (14,106) (59,630)INVESTING ACTIVITIES Purchases of property and equipment (5,890) (5,743)Proceeds from sale of assets and businesses, net of cash sold 100 119,400 Acquisitions and other investments, net of cash acquired — (900)Other investing activities (80) 174 Net cash (used in) provided by investing activities (5,870) 112,931 FINANCING ACTIVITIES Proceeds from equity offering 53,825 — Equity issuance costs (127) — Proceeds from borrowings and long-term debt — 92,030 Repayment of borrowings and long-term debt — (169,987)Debt issuance costs — (3,425)Stock repurchases — (14,960)Purchase of non-controlling interests (498) — Taxes paid related to net-share settlement of equity awards (434) (605)Other financing activities (824) (393)Net cash provided by (used in) financing activities 51,942 (97,340)Effect of exchange rate changes on cash, cash equivalents and restricted cash (71) 5,104 Net increase (decrease) in cash, cash equivalents and restricted cash 31,895 (38,935)Cash, cash equivalents and restricted cash at the beginning of the year 97,100 172,883 Cash, cash equivalents and restricted cash at the end of the period$128,995 $133,948 3D SYSTEMS CORPORATION
Segment Information
(Unaudited)
Three Months Ended
Six Months Ended
(in millions)June 30, 2026
June 30, 2025
June 30, 2026
June 30, 2025
Revenue: Healthcare Solutions$48.1 $45.0 $98.2 $86.3 Industrial Solutions 46.5 49.8 91.9 103.0 Total$94.6 $94.8 $190.1 $189.4 3D SYSTEMS CORPORATION
Reconciliations of GAAP to Non-GAAP Measures Presentation of Information in this Press Release
3D Systems reports its financial results in accordance with GAAP. Management also reviews and reports certain non-GAAP measures, including: adjusted revenue, non-GAAP gross profit, non-GAAP gross profit margin, non-GAAP diluted income (loss) per share, non-GAAP operating expense and Adjusted EBITDA. These non-GAAP measures exclude certain items that management does not view as part of 3D Systems’ core results as they may be highly variable, may be unusual or infrequent, are difficult to predict and can distort underlying business trends and results. Management believes that the non-GAAP measures provide useful additional insight into underlying business trends and results and provide meaningful information regarding the comparison of period-over-period results. Additionally, management uses the non-GAAP measures for planning, forecasting and evaluating business and financial performance, including allocating resources and evaluating results relative to employee compensation targets. 3D Systems’ non-GAAP measures are not calculated in accordance with or as required by GAAP and may not be calculated in the same manner as similarly titled measures used by other companies. These non-GAAP measures should thus be considered as supplemental in nature and not considered in isolation or as a substitute for the related financial information prepared in accordance with GAAP.
To calculate the non-GAAP measures, 3D Systems excludes the impact of the following items:
amortization of intangible assets, a non-cash expense, as 3D Systems’ intangible assets were primarily acquired in connection with business combinations;costs incurred in connection with acquisitions and divestitures, such as legal, consulting and advisory fees;stock-based compensation expenses, a non-cash expense;charges related to restructuring and cost optimization plans, impairment charges, including goodwill, and divestiture gains or losses;the impact of software divestitures, which were previously included in our Industrial Solutions segment, for pre-divestiture periods in 2025; andcosts, including legal fees, related to significant or unusual litigation matters. Amortization of intangibles and acquisition and divestiture-related costs are excluded from non-GAAP measures as the timing and magnitude of business combination transactions are not predictable, can vary significantly from period to period and the purchase price allocated to amortizable intangible assets and the related amortization period are unique to each acquisition. Amortization of intangible assets will recur in future periods until such intangible assets have been fully amortized. While intangible assets contribute to the company’s revenue generation, the amortization of intangible assets does not directly relate to the sale of the company’s products or services. Additionally, intangible assets amortization expense typically fluctuates based on the size and timing of the company’s acquisition activity. Accordingly, the company believes excluding the amortization of intangible assets enhances the company’s and investors’ ability to compare the company’s past financial performance with its current performance and to analyze underlying business performance and trends. Although stock-based compensation is a key incentive offered to certain of our employees, the expense is non-cash in nature, and we continue to evaluate our business performance excluding stock-based compensation; therefore, it is excluded from non-GAAP measures. Stock-based compensation expenses will recur in future periods. Charges related to restructuring and cost optimization plans, impairment charges, including goodwill, divestiture gains or losses, and the costs, including legal fees, related to significant or unusual litigation matters are excluded from non-GAAP measures as the frequency and magnitude of these activities may vary widely from period to period. Additionally, impairment charges, including goodwill, are non-cash. Furthermore, the company believes the costs, including legal fees, related to significant or unusual litigation matters are not indicative of our core business' operations.
The matters discussed above are tax effected, as applicable, in calculating non-GAAP diluted income (loss) per share.
Adjusted EBITDA, defined as net (loss) income, plus income tax (provision) benefit, interest and other income (expense), net, stock-based compensation expense, amortization of intangible assets, depreciation expense, and other non-GAAP adjustments, all as described above, is used by management to evaluate performance and helps measure financial performance period-over-period.
Furthermore, in this press release, 3D Systems reports certain non-GAAP financial measures further adjusted to remove the operating activity related to (i) Geomagic, which the Company divested on April 1, 2025, for $119.4 million in cash, and (ii) 3DXpert and Oqton, which the Company divested on October 31, 2025, for $3.3 million in cash plus a revenue-based royalty of up to $12.9 million (together with Geomagic, the "Software Divestitures"), for periods non-comparable on a year over year basis. The Company believes excluding non-comparable periods allows it to include the operating activity related to Software Divestitures only to the extent that results are comparable year over year.
A reconciliation of GAAP to non-GAAP financial measures is provided in the accompanying schedules.
Certain columns may not add due to the use of rounded numbers. Percentages presented are calculated from the underlying numbers in thousands.
3D Systems does not provide forward-looking guidance for certain measures on a GAAP basis. The Company is unable to provide a quantitative reconciliation of forward-looking Adjusted EBITDA to the most directly comparable forward-looking GAAP measure without unreasonable effort because certain items, including litigation costs, acquisition expenses, stock-based compensation expense, intangible assets amortization expense, restructuring expenses, and goodwill impairment charges, are difficult to predict and estimate. These items are inherently uncertain and depend on various factors, many of which are beyond the Company’s control, and as such, any associated estimate and its impact on GAAP performance could vary materially.
Non-GAAP Revenue (Unaudited)
Three Months Ended Six Months Ended(in millions)June 30, 2026
June 30, 2025 June 30, 2026
June 30, 2025Revenue$94.6 $94.8 $190.1 $189.4 Software divestitures — (1.5) — (10.1)Revenue excluding software divestitures (Non-GAAP)$94.6 $93.3 $190.1 $179.3 Non-GAAP Industrial Revenue (Unaudited)
Three Months Ended Six Months Ended(in millions)June 30, 2026
June 30, 2025 June 30, 2026
June 30, 2025Industrial Revenue$46.5 $49.8 $91.9 $103.0 Software divestitures — (1.5) — (10.1)Industrial Revenue excluding software divestitures (Non-GAAP)$46.5 $48.3 $91.9 $93.0 Non-GAAP Gross Profit and Gross Profit Margin (Unaudited)
Three Months Ended(in millions)June 30, 2026 June 30, 2025 Gross Profit
Gross Profit Margin(1) Gross Profit Gross Profit Margin(1)Gross profit (GAAP)$34.5 36.4% $36.2 38.1%Amortization expense 0.2 0.2% 0.2 0.2%Restructuring expense — —% 0.8 0.9%Gross profit (Non-GAAP)$34.7 36.7% $37.2 39.2%Software divestitures — —% (1.6) (1.0)%Gross profit excluding software divestitures (Non-GAAP)$34.7 36.7% $35.7 38.2% (1) Calculated as non-GAAP gross profit as a percentage of total revenue.
Six Months Ended(in millions)June 30, 2026 June 30, 2025 Gross Profit
Gross Profit Margin(1) Gross Profit Gross Profit Margin(1)Gross profit (GAAP)$68.8 36.2% $68.8 36.4%Amortization expense 0.3 0.2% 0.4 0.2%Restructuring expense — —% 1.0 0.5%Gross profit (Non-GAAP)$69.1 36.4% $70.2 37.1%Software divestitures — —% (8.7) (2.8)%Gross profit excluding software divestitures (Non-GAAP)$69.1 36.4% $61.5 34.3% (1) Calculated as non-GAAP gross profit as a percentage of total revenue.
Non-GAAP Operating Expense (Unaudited)
Three Months Ended Six Months Ended(in millions)June 30, 2026 June 30, 2025 June 30, 2026 June 30, 2025Operating expense (GAAP)$45.1 $51.5 $86.1 $121.0 Amortization expense (0.8) (0.7) (1.4) (1.6)Stock-based compensation expense (2.3) 3.6 (4.6) (0.6)Acquisition and divestiture-related expense — (0.2) (0.2) (1.1)Legal and other expense (2.4) (3.0) (3.5) (4.2)Restructuring expense — (4.3) (0.2) (5.1)Non-GAAP operating expense$39.5 $46.8 $76.1 $108.4 Software divestitures — (2.2) — (7.2)Non-GAAP operating expenses excluding software divestitures$39.5 $44.6 $76.1 $101.2 Net (Loss) Income Attributable to 3D Systems Corporation to Adjusted EBITDA (Unaudited)
Three Months Ended Six Months Ended(in millions)June 30, 2026 June 30, 2025 June 30, 2026 June 30, 2025Net (loss) income attributable to 3D Systems Corporation (GAAP)$(12.9) $104.4 $(17.3) $67.5 Interest expense (income), net 1.6 (1.0) 3.2 (1.4)Provision for income taxes 0.4 11.0 1.8 11.7 Depreciation expense 4.1 4.3 8.3 8.9 Amortization expense 1.0 0.9 1.7 2.0 EBITDA (Non-GAAP) (5.8) 119.6 (2.3) 88.7 Stock-based compensation expense 2.3 (3.6) 4.6 0.6 Acquisition and divestiture-related expense — 0.2 0.2 1.1 Legal and other expense 2.4 3.1 3.5 4.2 Restructuring expense — 5.1 0.2 6.1 Net loss attributable to redeemable non-controlling interest — — (0.2) — Loss on equity method investment, net of tax 0.9 1.3 2.0 2.2 Gain on repurchase of debt — (8.2) — (8.2)Gain on disposal of investment — — (2.6) — Gain on disposition — (125.7) — (125.7)Other non-operating income (0.6) 2.8 (4.2) 1.8 Adjusted EBITDA (Non-GAAP)$(0.8) $(5.3) $1.3 $(29.3)Software divestitures — 0.7 — (1.6)Adjusted EBITDA (Non-GAAP) excluding software divestitures$(0.8) $(4.7) $1.3 $(30.8) Diluted Loss per Share (Unaudited)
Three Months Ended Six Months Ended(in dollars)June 30, 2026 June 30, 2025 June 30, 2026 June 30, 2025Diluted (loss) income per share (GAAP)$(0.09) $0.57 $(0.12) $0.37 Amortization expense 0.01 0.01 0.01 0.01 Stock-based compensation expense 0.02 (0.02) 0.03 — Acquisition and divestiture-related expense — — — 0.01 Legal and other expense 0.02 0.02 0.02 0.02 Restructuring expense — 0.03 — 0.03 Gain on repurchase of debt — (0.04) — (0.04)Gain on disposal of investment — — (0.02) — Gain on disposition — (0.69) — (0.69)Loss on equity method investment and other 0.01 0.01 0.01 0.02 Tax effect of the adjustments reflected above — 0.05 — 0.05 Non-GAAP diluted loss per share$(0.04) $(0.07) $(0.05) $(0.22)Software divestitures — 0.01 — (0.01)Non-GAAP diluted loss per share excluding software divestitures$(0.04) $(0.06) $(0.05) $(0.23)
GAMI manufacturing license advances NAMI’s role in defense localization and supports critical infrastructure resilience in the Kingdom ROCK HILL, S.C., July 29, 2026 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) today announced that the National Additive Manufacturing and Innovation Company (NAMI) has been granted a Military Manufacturing License by the General Authority for Military Industries (GAMI) of Saudi Arabia.
NAMI is a joint venture between 3D Systems, Dussur (Saudi Arabian Industrial Investments Company), and Saudi Energy. The GAMI license authorizes NAMI to engage in regulated military manufacturing activities in the Kingdom, positioning it among a limited group of Saudi companies with this authorization.
The license strengthens NAMI’s ability to support Saudi Arabia’s Vision 2030 objective of localizing more than 50 percent of military spending by 2030. It also enables more efficient collaboration with international defense original equipment manufacturers on the qualification and production of critical aerospace and defense components in the Kingdom.
NAMI focuses on three priority markets in Saudi Arabia: military aerospace and defense, oil and gas, and energy generation and transmission. In the current environment, the company’s advanced manufacturing capabilities also support efforts to reduce risk of infrastructure interruptions by enabling localized, on-demand production of critical parts. NAMI operates in a growing additive manufacturing market in Saudi Arabia, an industry valued at more than $300 million currently and projected to grow to almost $2 billion by 2034, (source: IMARC Group), supported by Vision 2030 localization priorities across defense, energy, and industrial sectors.
“This license expands NAMI’s addressable market and strengthens the foundation for long-term growth,” said Eng. Mohammed Swaidan, CEO of NAMI. “It enables us to deploy our established manufacturing capabilities across regulated defense programs, expand the production of mission critical parts, and advance Saudi Arabia’s position in advanced manufacturing.”
“The GAMI license further demonstrates the strategic value of our joint venture in Saudi Arabia,” said Dr. Jeffrey Graves, President and CEO of 3D Systems. “It strengthens our ability to support leading defense OEMs as they pursue localization and supply-chain resilience in the Kingdom, reinforcing 3D Systems’ position in the aerospace and defense markets.”
About NAMI
NAMI is a joint venture between 3D Systems, Dussur, and Saudi Energy focused on advancing industrial additive manufacturing in Saudi Arabia. The company supports localization under Vision 2030 across military aerospace and defense, oil and gas, and energy applications.
Find out more at: https://www.nami3dp.com/en
About 3D Systems
For 40 years Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future. More information on the company is available at www.3dsystems.com.
Forward-Looking Statements
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 including statements regarding the timing of product launches, regulatory approvals, market opportunities, expected revenue impact, and shareholder value. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward-looking statements can be identified by terms such as “believes,” “belief,” “expects,” “may,” “will,” “estimates," “intends,” “anticipates” or “plans” or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions, and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings “Forward-Looking Statements” and “Risk Factors” in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not, be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.
ROCK HILL, S.C., July 28, 2026 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE: DDD) announced its role in enabling the Defense Health Agency (DHA) and the Walter Reed National Military Medical Center's 3D Medical Applications Center (3D MAC) to achieve U.S. Food and Drug Administration (FDA) premarket clearance for the 3D MAC Titanium Cranial Plate (TCP) System, the first-ever FDA-cleared implant granted to a point-of-care institution. 3D MAC's patient-specific Titanium Cranial Plate (TCP) will be used to treat U.S. active duty personnel and war fighters suffering from traumatic head injuries around the world.
Made advancements for C103 material with 3D Systems AIG GroupExpects fast qualification and certification of machines and materialsFocuses on a fast, streamlined domestic supply chain ROCK HILL, S.C., July 27, 2026 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE: DDD) announced that Elmet Technologies, a wholly owned subsidiary of The Elmet Group (Nasdaq: ELMT) (“Elmet”), is deploying the DMP Flex 350 Triple metal additive manufacturing machine (laser powder bed fusion) for the rapid production of advanced aerospace parts for hypersonic vehicles. Utilizing a high-performance C103 material, the Elmet team expects to rapidly qualify and certify the system to begin production in 2026.
High-performance C103 Material
Elmet Technologies has spent the last 8 years with 3D Systems’ Application Innovation Group (AIG), a team of expert engineers who consult, guide and assist customers with advanced development of processes and materials. As part of this work the team developed processing parameters for C103 material specifically for this deployment. C103 is a niobium-based alloy composed primarily of niobium with hafnium and titanium, designed for extreme high-temperature and aerospace applications.
“We collaborated with AIG on the parameter sets for the C103 material,” said Scott Ohm, R&D Manager, Elmet Technologies. “The work was done on an earlier 3D Systems metal 3D printer and we expect that prior research work will make it very easy to begin production on the DMP 350 Flex Triple.”
Selecting the DMP 350 Flex Triple
The DMP Flex 350 Triple supports a 350 x 350 x 350 mm build size, with 3 lasers for greater productivity. A best-in-class low oxygen environment maintains <25 ppm oxygen, typically ~0-6 ppm oxygen. This low oxygen (and other interstitial element) environment allows for exceptional powder reuse rates along with tight control of metal chemistry and superior surface finishes.
Elmet Technologies intends to use this system for the production of large heat exchangers for hypersonic vehicles. Elmet Technologies selected this advanced metal 3D printer for a number of reasons:
Very low oxygen content maintained within the system makes it a strong choice for very high-quality, consistent and repeatable parts production using refractory metalsThe larger build size helps to meet the growing requirements of customersThe 3-laser system can enable large production volumes, quicklyIt works with Elmet’s novel in-house materialsIt is anticipated to enable fast qualification and certification “This machine, material and process should achieve qualification within a couple of months,” said Ohm. “We anticipate NASA 6030 certification a few months after that. This is very fast and indicative of the quality of this entire solution, as well as confirmation of the sound business case for collaboration 3D Systems’ Aerospace and Defense experts to streamline the qualification and certification process.”
Direct Production of Monolithic Metal Parts
Metal 3D printing from 3D Systems enables the design and manufacture of higher performance heat transfer structures that are accurate, complex, and leak tight with less assembly, shorter lead times, reduced costs, higher yield, and better component reliability versus legacy processes like brazing. The use of Direct Metal Printing (DMP) reduces reliance on extended supply chains and helps protect intellectual property while delivering components that cannot be produced using traditional methods including thin walls, increased surface-to-volume ratios and maximal heat transfer with acceptable pressure drop.
“This collaboration with Elmet is a standout example of using metal additive manufacturing to create new advantages in aerospace design and production,” said Mike Shepard, Vice President of Aerospace & Defense, 3D Systems. “The low oxygen architecture of our DMP series metal additive machines is ideal for manufacture of complex components from highly reactive metals, like C103 and other refractory alloys.”
Securing the Supply Chain
By integrating in-house materials with 3D Systems’ DMP Flex 350 Triple, Elmet is working to secure its supply chain for the US defense industrial base, enabling fast, tool-free localized production of advanced aerospace parts.
About 3D Systems
For 40 years Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future. More information on the company is available at www.3dsystems.com.
Forward-Looking Statements
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 including statements regarding the timing of product launches, regulatory approvals, market opportunities, expected revenue impact, and shareholder value. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company or Elmet to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward-looking statements can be identified by terms such as "believes," "belief," "expects," "may," "will," "estimates," "intends," "anticipates" or "plans" or the negative of these terms or other comparable terminology. Forward-looking statements are based upon the company’s or Elmet’s, as applicable, management’s beliefs, assumptions, and current expectations and may include comments as to the company’s or Elmet’s respective beliefs and expectations as to future events and trends affecting their respective businesses and are necessarily subject to uncertainties, many of which are outside the control of the company or Elmet, as applicable. The factors described under the headings "Forward-Looking Statements" and "Risk Factors" in the company’s and Elmet’s filings with the Securities and Exchange Commission, as well as other factors, could cause actual results of the Company or Elmet, as applicable, to differ materially from those reflected or predicted in forward-looking statements. Although the respective management of the company and Elmet believe that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not, be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as of the date of the statement. Neither 3D Systems nor Elmet undertake any obligation to update or review any forward-looking statements made by their respective management or on either’s behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.
ROCK HILL, S.C., July 23, 2026 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD) announced today it will release its financial results for the second quarter 2026 after the U.S. stock market closes on Monday, August 3, 2026. The company will hold a conference call and simultaneous webcast to discuss these financial results on Tuesday, August 4, 2026, at 8:30 a.m. Eastern Time.
BOCA RATON, Fla.--(BUSINESS WIRE)-- #FDAClearance--SurGenTec®, a medical device company focused on advancing treatment options for orthopedic and spine surgery, today announced FDA clearance of its ION-L™ Lumbar Facet Fixation System. ION-L™, part of SurGenTec's facet fixation platform, is indicated for the treatment of patients with degenerative disc disease (DDD) from L3 to S1 in skeletally mature patients who have failed conservative care. This clearance is supported by compelling long-term clinical evidenc.
It has been about a month since the last earnings report for 3D Systems (DDD - Free Report) . Shares have lost about 25.7% in that time frame, underperforming the S&P 500.
Will the recent negative trend continue leading up to its next earnings release, or is 3D Systems due for a breakout? Before we dive into how investors and analysts have reacted as of late, let's take a quick look at its most recent earnings report in order to get a better handle on the important catalysts.
3D Systems Posts Narrower Loss in Q4 Earnings, Revenues Rise Y/Y3D Systems reported a fourth-quarter 2025 non-GAAP loss of 13 cents per share, narrower than the reported loss of 19 cents per share in the year-ago quarter. The Zacks Consensus Estimate was pegged at a loss of 11 cents per share.
DDD reported revenues of $106.3 million, down 4.3% year over year but up 16% on a sequential basis. The top line beat the Zacks Consensus Estimate by 7.87%.
DDD’s Q4 Quarterly DetailsProduct revenues declined 11.2% year over year to $62.6 million in the fourth quarter, contributing 59% to total revenues. Services revenues, which accounted for 41% of total revenues, increased 7.7% year over year to $43.7 million.
The company operates through two key segments — Healthcare Solutions and Industrial Solutions — tailored to the diverse industries it serves. Healthcare Solutions focuses on dental, medical devices, personalized health services and regenerative medicine, whereas Industrial Solutions caters to aerospace, defense, transportation and general manufacturing.
In the fourth quarter, Healthcare Solutions’ revenues increased 25% year over year to $50.5 million. MedTech increased more than 8% year over year.
Industrial Solutions' revenues declined 21.1% year over year to $55.8 million. Aerospace and Defense grew 50% year over year.
DDD Q4 Operating DetailsIn the fourth quarter of 2025, DDD’s non-GAAP gross profit fell 5% year over year to $33 million. The non-GAAP gross profit margin declined 30 basis points to 31% due to lower sales volumes.
Adjusted EBITDA loss of $5.3 million in the fourth quarter of 2025 was narrower than the loss of $19.1 million reported in the year-ago quarter.
Non-GAAP operating expense was $42.5 million compared with $58.4 million reported in the year-ago quarter.
3D Systems’ Balance Sheet DetailsAs of Dec. 31, 2025, cash and cash equivalents were $97.1 million, higher than $95.5 million as of Sept. 30, 2025.
As of Dec. 31, 2025, DDD had a total debt of $90.3 million. A total of $3.9 million in debt is scheduled to mature in the fourth quarter of 2026, with the remaining $92 million maturing in 2030.
DDD Offers Positive Q1 Guidance3D Systems expects revenues between $91 million and $94 million for the first quarter of 2026. Adjusted EBITDA loss is expected between $5 million and $3 million.
How Have Estimates Been Moving Since Then?Since the earnings release, investors have witnessed a upward trend in estimates review.
The consensus estimate has shifted -22.73% due to these changes.
VGM ScoresCurrently, 3D Systems has a average Growth Score of C, a grade with the same score on the momentum front. Charting a somewhat similar path, the stock was allocated a score of D on the value side, putting it in the bottom 40% for this investment strategy.
Overall, the stock has an aggregate VGM Score of D. If you aren't focused on one strategy, this score is the one you should be interested in.
OutlookEstimates have been trending upward for the stock, and the magnitude of this revision has been net zero. Notably, 3D Systems has a Zacks Rank #4 (Sell). We expect a below average return from the stock in the next few months.
Advancements to be Unveiled at RAPID + TCT 2026 in Boston April 13, 2026 07:30 ET | Source: 3D Systems Inc.
Key Highlights
Introduces SLA® 825 Dual, a next-generation dual-laser production system now available world-wide, delivering over 20% larger build volumes and up to 30% faster print speeds versus competitive systems, enabling higher throughput for precision production applications.Launches AddiTrak™, an advanced integrated software platform for 3D Systems additive manufacturing, delivering secure, on-premises, real-time fleet monitoring, process control, data collection, and customizable analytics.3D Systems’ comprehensive range of technologies and application expertise enabling real-world production adoption across metals and polymers, driven by accelerating customer demand in aerospace & defense, automotive, healthcare, and industrial markets. ROCK HILL, S.C., April 13, 2026 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD) today announced new hardware, software, and applications that are enabling customers to scale additive manufacturing into production environments requiring high throughput, reliability, repeatability, and process control.
At RAPID + TCT 2026 (Booth #1801), 3D Systems will introduce the new SLA 825 Dual to the U.S. market, a next-generation stereolithography system engineered to significantly increase production output while maintaining the accuracy and consistency required for industrial manufacturing. The company will also debut AddiTrak™, a factory-floor software platform purpose-built for managing connected 3D Systems production environments.
These innovations reinforce 3D Systems’ strategy to deliver production-ready additive manufacturing solutions that integrate hardware, software, materials, and application expertise to help customers move beyond prototyping and into scaled manufacturing.
Maximizing SLA Speed, Productivity, and Consistency with SLA 825 Dual
The SLA 825 Dual features a 22% larger build volume and delivers up to 25% faster build speeds than its predecessor, enabling customers to run more builds per shift and consolidate more parts per platform. Designed for high-utilization environments, the system supports demanding applications such as motorsports, full-scale precision prototyping, and investment casting patterns, where yield, dimensional accuracy, and repeatability are critical.
By combining higher throughput with proven SLA precision, the SLA 825 Dual provides manufacturers with a scalable solution for transitioning stereolithography into high volume production workflows.
Driving Fleet Visibility and Factory Efficiency with AddiTrak™
As additive manufacturing scales, fleet-level visibility and process control become essential to maintaining productivity, quality, and on-time delivery in production environments.
To address these needs, 3D Systems is introducing AddiTrak, a secure, on-premises software platform designed specifically for the entire range of 3D Systems printers and accompanying workflows. AddiTrak provides centralized monitoring, analytics, and optimization across the production floor through a unified dashboard, while supporting Industry 4.0-compatible connectivity including MTConnect and OPC UA.
AddiTrak is fully native to the 3D Systems ecosystem and integrates seamlessly with 3D Sprint®, enabling a connected, end-to-end workflow—from job preparation and scheduling through build execution and performance analysis—across the entire printing fleet.
Customers can rely on security of their sensitive design and process data, as AddiTrak is fully on-premises and under their control, through all stages of the manufacturing process.
Presenting Real-World Production Examples
3D Systems will also highlight customer application examples which demonstrate additive manufacturing supporting production. One of these is Eureka Pumps AS, based in Norway, which has partnered with 3D Systems to manufacture large-format metal spare parts on demand, using 3D Systems Direct Metal Printing (DMP) technology.
This production model helps address part obsolescence, extended lead times, and inventory constraints, illustrating how additive manufacturing can strengthen supply chain resilience and responsiveness, while reducing working capital needs, in mission-critical industrial environments.
By pairing advanced printing platforms with specialized materials, software, and application development expertise, 3D Systems continues to rapidly expand the range of production problems that additive manufacturing can solve.
“The industrialization of additive manufacturing continues to accelerate as more companies realize its ability to deliver both performance gains through design innovation and operational flexibility through digital production,” said Patrick Dunne, SVP, Technical Fellow, 3D Systems.
CEO Commentary
“Over the past several years, we’ve made disciplined investments to refresh our portfolio and focus on manufacturing applications where additive delivers the greatest value,” said Dr. Jeff Graves, President and CEO, 3D Systems. “At RAPID + TCT 2026, we’re demonstrating how those investments are translating into production-focused solutions, from high-throughput stereolithography to connected software platforms that improve visibility and control across the full range of factory environments. These capabilities position our customers to apply additive manufacturing where precision, productivity, and part complexity matter most.”
Experience 3D Systems at RAPID + TCT 2026
3D Systems will showcase these innovations and its application-focused portfolio at Booth #1801 during RAPID + TCT 2026, held April 13–16, 2026, in Boston, Massachusetts.
Conference attendees are also invited to attend the following presentations:
Steve Hartung – Pixels to 3D Printed Investment Casting Patterns, Tuesday, April 14, 2026, 1:30 PM, Tech Hub Stage, Booth #1531Joe Wisnewski – AddiTrak™, Tuesday, April 14, 2026, 3:30 PM, Tech Hub Stage, Booth #1531Panel: Life-Saver: How AM is Transforming Point-of-Care, including Dr. Jeff Graves, Wednesday, April 15, 2026, 8:30 AM, SME Main Stage Forward-Looking Statements
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward-looking statements can be identified by terms such as "believes," "belief," "expects," "may," "will," "estimates," "intends," "anticipates" or "plans" or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions, and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings "Forward-Looking Statements" and "Risk Factors" in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.
About 3D Systems
For nearly 40 years, Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future. More information on the company is available at www.3dsystems.com.
European commercial availability begins May 4, 2026, two months ahead of the previously targeted summer launchCertification expands the addressable market for the Company’s flagship dental printing platform to over 60 million edentulous patients across the US and EU, representing a multi-billion dollar denture marketEarly feedback from the U.S. market launch highlights strong patient satisfaction with denture aesthetics, comfort, and performance using NextDent 300 technology
ROCK HILL, S.C., April 28, 2026 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD) today announced that its NextDent® Jet Base and NextDent® Jet Teeth materials, together with the NextDent 300 MultiJet 3D printer, have received Class IIa certification under the European Union Medical Device Regulation (MDR 2017/745). This regulatory milestone enables immediate commercialization of the complete NextDent Jetted Denture Solution across the EU.
This achievement builds directly on the Company’s full-scope EU MDR certification announced in March 2026 and demonstrates 3D Systems’ leadership in meeting Europe’s most stringent quality, safety, and clinical evidence requirements for moderate-risk medical devices.
The NextDent Jetted Denture Solution is the industry’s first monolithic, multi-material jetted denture workflow. Powered by the NextDent 300 printer and the newly certified Jet Base and Jet Teeth materials, it enables dental labs to produce durable, highly aesthetic, patient-specific monolithic dentures in a single print, fully cured and ready for finishing without additional post-curing steps. This breakthrough delivers superior accuracy, consistency, and production speed compared to traditional analog methods, reinforcing 3D Systems’ leadership across the full spectrum of dentistry: straighten, protect, repair, and replace.
Jeffrey Graves, Ph.D., President and Chief Executive Officer of 3D Systems, stated: “Achieving Class IIa MDR certification for our NextDent Jetted Denture Solution is a major milestone that validates the strength of our clinical data, quality systems, and innovation pipeline. By launching in Europe on May 4, well ahead of our original summer timeline, we are immediately expanding access to this transformative technology for dental labs and clinics across the region. This clearance substantially increases our available addressable market for this high-value platform. As adoption accelerates in both the U.S. and Europe, we expect it to drive significant recurring revenue through premium materials while reinforcing our position as the leading full-service provider in digital dentistry.”
According to internal estimates and market data, the European denture segment represents a multi-billion-dollar opportunity. With this certification, European customers can now access a complete, regulatory-compliant workflow, hardware, certified materials, software, and application expertise, from a single trusted partner.
The NextDent 300 MultiJet printer and associated NextDent Jet Base and Jet Teeth materials will be commercially available in EU markets beginning May 4, 2026, through 3D Systems and its authorized distribution partners.
For more information about the NextDent Jetted Denture Solution, visit: www.3dsystems.com/dental-jetted-dentures
About 3D Systems
For nearly 40 years, 3D Systems has pioneered additive manufacturing solutions that transform how products are designed, prototyped, and produced. As a full-service solutions partner, the Company delivers industry-leading 3D printing technologies, materials, software, and expert application support to high-value markets including medical and dental, aerospace & defense, transportation, and durable goods. More information is available at www.3dsystems.com.
Forward-Looking Statements
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 including statements regarding the timing of product launches, regulatory approvals, market opportunities, expected revenue impact, and shareholder value. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward-looking statements can be identified by terms such as "believes," "belief," "expects," "may," "will," "estimates," "intends," "anticipates" or "plans" or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions, and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings "Forward-Looking Statements" and "Risk Factors" in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.
ROCK HILL, S.C., April 30, 2026 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today it will release its financial results for the first quarter 2026 after the U.S. stock market closes on Monday, May 11, 2026. The company will hold a conference call and simultaneous webcast to discuss these financial results on Tuesday, May 12, 2026 at 8:30 a.m. Eastern Time.
First Quarter 2026 Financial Results Conference Call
Date: Tuesday, May 12, 2026
Time: 8:30 a.m. Eastern Time
Listen via webcast: www.3dsystems.com/investor
Participate via telephone: 201-689-8345 or 877-407-8291
The webcast replay will be available approximately two hours after the end of the conference call at www.3dsystems.com/investor.
About 3D Systems
For nearly 40 years, Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future. More information on the company is available at www.3dsystems.com.
New American Formula 1™ team selected seven 3D Systems SLA systems to accelerate critical wind tunnel testing and parts production prior to its 2026 Formula 1™ race debutIndustry-leading SLA materials portfolio is enabling accurate and rapid production of test parts3D Systems’ tightly integrated software, materials and machines, plus expert assistance by 3D Systems, allowed Team to “Race to the Race”
ROCK HILL, S.C., May 07, 2026 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced that Cadillac Formula 1® Team, the newest entrant to the FIA FORMULA ONE WORLD CHAMPIONSHIP, deployed seven SLA 3D printing systems to accelerate critical wind tunnel testing prior to the 2026 FORMULA 1 season, as well as the development of production parts. The combination of these large format additive manufacturing systems, integrated with 3D Systems software, along with Accura® Xtreme White 200, Accura Xtreme Black and Accura HPC materials, enabled rapid and critical wind tunnel testing within rapidly diminishing race deadlines.
3D Systems’ SLA solutions are developed specifically for efficient, high-quality production-grade manufacturing delivering the best in sharp part corners, small extruded and embossed feature details, superior side wall details and smooth layer lines on angled faces in its class. It enables tool-free manufacturing, eliminating weeks of lead time and significantly reducing costs. This was a critical factor while the Cadillac Formula 1® Team qualified for the FIA FORMULA ONE WORLD CHAMPIONSHIP and continues to be essential for continued race car development.
The FIA FORMULA ONE WORLD CHAMPIONSHIP is described by Racecar Engineering magazine as “the greatest challenge a manufacturer of mechanical components may ever be confronted with1.” Indeed, FORMULA 1 racing operates under some of the most stringent technical requirements in all of motorsport. The Cadillac Formula 1® Team worked hard to meet the barriers to entry and secured its place in the 2026 FORMULA 1 season in time for the FORMULA 1 QATAR AIRWAYS AUSTRALIAN GRAND PRIX 2026 in March.
To achieve this, the team worked with 3D Systems’ Application Innovation Group (AIG), a global team of Additive Manufacturing engineers, designers, and technicians who bring expertise to customers to co-develop solutions.
“3D Systems was founded on innovation, pioneering the additive manufacturing industry and we are continuing to lead it into an era of high-precision, highly repeatable production at scale,” said Elvis Perez, Senior Vice President, Sales, 3D Systems. “We are pleased that our work has enabled Cadillac Formula 1® team to enter the 2026 FORMULA 1 season despite the short timelines and strict qualification conditions.”
About 3D Systems
For nearly 40 years, Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future. More information on the company is available at www.3dsystems.com.
Forward-Looking Statements
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 including statements regarding the timing of product launches, regulatory approvals, market opportunities, expected revenue impact, and shareholder value. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward-looking statements can be identified by terms such as "believes," "belief," "expects," "may," "will," "estimates," "intends," "anticipates" or "plans" or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions, and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings "Forward-Looking Statements" and "Risk Factors" in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.
ROE triples its manufacturing capacity for high-precision, multi-material monolithic dentures, capitalizing on early success with the NextDent® 300 jetted-denture solution to meet accelerating U.S. demand.Expansion highlights rapid commercial adoption of 3D Systems’ industry-first multi-material Jetted Denture Solution.Reinforces 3D Systems’ leadership in digital dentistry as labs shift from conventional methods to scalable, high-margin digital workflows. ROCK HILL, S.C., May 11, 2026 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD) today announced that ROE Dental Laboratory, one of the nation’s premier full-service dental labs, has purchased additional NextDent® 300 3D printers to expand its digital denture manufacturing capacity. With multiple systems in multiple locations now coming online, ROE becomes the leading dental laboratory in the U.S. to scale at this pace with the NextDent Jetted Denture Solution, dramatically increasing throughput and validating the platform for digital denture production.
This fleet expansion enables ROE to triple production capacity for next-generation jetted dentures, meeting strong clinician demand for faster turnaround, superior fit, and attractive aesthetic outcomes.
NextDent 300: The Industry’s First True Multi-Material Jetted Denture Platform
The NextDent 300 powers 3D Systems’ breakthrough Jetted Denture Solution — the only system capable of producing monolithic dentures (base + teeth in one print) using two specialized materials in a single build. Key advantages include:
Exceptional precision and fit with minimal post-processing.Multi-material jetting: NextDent Jet Base (high-impact, four shades) + NextDent Jet Teeth (rigid, esthetic, wear resistant, color-blended).High-volume output with limited hands-on labor.Full digital workflow: Seamless integration with leading CAD software for streamlined design-to-delivery. This technology replaces labor-intensive traditional processes with a repeatable, scalable digital solution, reducing costs, improving fit and product consistency, and shortening turnaround times.
ROE Positions Itself at the Forefront of Digital Denture Innovation
ROE Dental Laboratory has long been an early leader in digital dentistry. Its rapid expansion of NextDent 300 systems since product launch in the Fall of 2025 demonstrates strong confidence in the platform’s clinical and operational performance.
“The NextDent 300 has exceeded our expectations in production efficiency, dentist acceptance, and patient satisfaction. Adding more systems at this early stage allows us to triple output while maintaining the high standards of quality and consistency. Being first to scale this technology gives us a competitive edge.” said BJ Kowalski, CEO of ROE Dental Laboratory.
3D Systems Strengthens Leadership in High-Growth Digital Dentistry
ROE’s aggressive adoption underscores the momentum behind 3D Systems’ digital dentistry portfolio. As more labs modernize, the NextDent platform is emerging as the preferred solution for high-volume, high-precision denture manufacturing. With U.S. and EU regulatory approvals now in place, the combined addressable market exceeds 60 million edentulous patients, representing a multi-billion-dollar opportunity.
“ROE’s rapid expansion of NextDent 300 systems is powerful validation of our Jetted Denture Solution,” said Jeff Graves, President and CEO of 3D Systems. “This technology is transforming denture production from a craft into a scalable, profitable digital workflow. Labs can now deliver a superior product with shorter lead times, getting better solutions to patients faster and more economically than ever before. We’re excited to support innovators like ROE as they capitalize on this shift.”
For more information about the NextDent Jetted Denture Solution, visit: www.3dsystems.com/dental-jetted-dentures
About 3D Systems
For nearly 40 years, Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future. More information on the company is available at www.3dsystems.com.
Forward-Looking Statements
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 including statements regarding the timing of product launches, regulatory approvals, market opportunities, expected revenue impact, and shareholder value. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward-looking statements can be identified by terms such as "believes," "belief," "expects," "may," "will," "estimates," "intends," "anticipates" or "plans" or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions, and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings "Forward-Looking Statements" and "Risk Factors" in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.
ROCK HILL, S.C., May 11, 2026 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the first quarter ended March 31, 2026.
Q1 2026 revenue of $95.5 million increased 1% year-over-year, or 11% excluding the impact of divestitures, driven by strong performance in the Healthcare business and double‑digit growth across key markets, including Dental, Med Tech, and Aerospace & Defense.GAAP EPS loss narrowed to $(0.03), or $(0.01) on a non-GAAP basis, while Adjusted EBITDA improved to $2.1 million, reflecting the benefits of higher sales volumes and continued execution of cost reduction initiatives.Robust growth in Dental and Med Tech, each exceeding approximately 20% year-over-year, drove Healthcare to a scale that now rivals the Company's Industrial segment.Early success of recently launched products in Dental and Aerospace & Defense markets, including advanced printing systems for monolithic dentures and high‑performance metal components, is expected to support sustained long‑term revenue growth.Amid ongoing global risks, the Company remains focused on building top-line momentum in key markets over the coming quarters, while maintaining disciplined cost management to achieve our goal of full-year break-even Adjusted EBITDA. Summary of Financial Results
(Unaudited)
Three Months Ended(in millions, except per share data) March 31, 2026 March 31, 2025Revenue $95.5 $94.5 Gross profit 34.3 32.7 Gross profit margin 35.9 % 34.6 %Operating expense 41.0 69.5 Operating loss (6.6) (36.8)Net loss attributable to 3D Systems Corporation (4.4) (37.0)Diluted loss per share (0.03) (0.28) Non-GAAP measures for year-over-year comparisons Non-GAAP gross profit margin 36.1 % 35.0 %Non-GAAP operating expense 36.6 61.6 Adjusted EBITDA 2.1 (23.9)Non-GAAP diluted loss per share $(0.01) $(0.21) Summary Comments on Results
Dr. Jeffrey Graves, President and Chief Executive Officer of 3D Systems, said, “We are pleased with our first‑quarter performance on both the top and bottom line, which exceeded our initial expectations. Revenue growth was driven by strength in our key markets, including Dental, Med Tech, and Aerospace & Defense. These customers continue to rapidly adopt 3D printing as a core manufacturing technology and expand the range of applications they deploy. In the first quarter, this momentum drove growth rates of more than 20% in our Dental (excluding aligners), Med Tech, and Aerospace & Defense markets. This performance highlights the market‑leading breadth of our additive manufacturing portfolio, spanning direct metal printing and all five major polymer technologies, combined with our deep expertise in advanced applications.”
Dr. Graves concluded, “As the additive manufacturing industry begins to emerge from a multi‑year downturn, our sustained investments in research and development are enabling us to introduce a broad pipeline of new products that are gaining increasing customer traction. While the global economic environment remains uncertain, we are optimistic that, as capital investment activity strengthens, we are well positioned to benefit from the resulting expansion in global manufacturing capacity.”
“Adjusting for divestitures completed in 2025, total revenue increased 11% year over year, demonstrating a return of core revenue growth as we move into 2026” said Phyllis Nordstrom, Chief Financial Officer of 3D Systems. “Strong sales across key product areas, along with a focus on margin expansion, profitability, and efficient cost management, positively contributed to our performance in the quarter. We remain committed to managing costs while making targeted investments in our priority markets to drive profitable growth.”
First Quarter 2026 Results
Total revenue increased 1% to $95.5 million compared to the prior year period. Adjusting for software divestitures completed in 2025, including Geomagic, 3DXpert and Oqton, total revenue increased by 11%.
Healthcare Solutions revenue increased approximately 21% to $50.1 million compared to the prior year period.
Industrial Solutions revenue decreased approximately 15% to $45.4 million compared to the prior year period. Adjusting for divestitures, Industrial Solutions revenue increased 2% year over year.
Gross profit margin increased to 35.9% compared to 34.6% in the prior year period. Non-GAAP gross profit margin increased to 36.1% compared to 35.0% in the prior year period. Adjusting for software divestitures, non-GAAP gross profit margin increased by 600 basis points.
Net loss attributable to 3D Systems Corporation decreased by $32.6 million to $4.4 million compared to the prior year period. The improvement was primarily driven by lower operating expenses, higher sales volume, and favorable revenue mix.
Adjusted EBITDA turned positive, improving by $25.9 million to $2.1 million compared to the prior year period, driven by strong sales, favorable revenue mix, and the impact of prior cost reduction actions. Adjusting for software divestitures, Adjusted EBITDA improved $28.2 million.
Financial Liquidity
At March 31, 2026, the Company had total cash of $86.5 million, which included cash and cash equivalents of $85.1 million and restricted cash of $1.4 million. A total of $3.9 million in principal amount of debt is scheduled to mature in the fourth quarter of 2026, with the remaining $92.0 million principal maturing in 2030.
Second Quarter 2026 Outlook
Revenue: $93 - $95 million
Adjusted EBITDA: ($4) million - ($2) million
3D Systems does not provide forward-looking guidance for certain measures on a GAAP basis. The Company is unable to provide a quantitative reconciliation of forward-looking Adjusted EBITDA to the most directly comparable forward-looking GAAP measures without unreasonable effort because certain items, including litigation expenses, acquisition expenses, stock-based compensation expense, intangible amortization expense, restructuring expenses, and goodwill impairment, are difficult to predict and estimate. These items are inherently uncertain and depend on various factors, many of which are beyond the Company’s control, and as such, any associated estimate and its impact on GAAP performance could vary materially.
First Quarter 2026 Conference Call and Webcast
The Company will host a conference call and simultaneous webcast to discuss these results on May 12, 2026, which may be accessed as follows:
Date: Tuesday, May 12, 2026
Time: 8:30 a.m. Eastern Time
Listen via webcast: www.3dsystems.com/investor
Participate via telephone: 877-407-8291 or 201-689-8345
A replay of the webcast will be available approximately two hours after the live presentation at www.3dsystems.com/investor.
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 including statements regarding the timing of product launches, regulatory approvals, market opportunities, expected revenue impact, and shareholder value. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the Company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward-looking statements can be identified by terms such as "believes," "belief," "expects," "may," "will," "estimates," "intends," "anticipates" or "plans" or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions, and current expectations and may include comments as to the Company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the Company. The factors described under the headings "Forward-Looking Statements" and "Risk Factors" in the Company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.
About 3D Systems
Nearly 40 years ago, Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future. More information on the Company is available at www.3dsystems.com.
3D SYSTEMS CORPORATION
Condensed Consolidated Balance Sheets
(Unaudited)
(in thousands, except par value) March 31, 2026 December 31, 2025ASSETS Current assets: Cash and cash equivalents $85,083 $95,635 Accounts receivable, net of reserves — $4,001 and $3,608 86,237 83,806 Inventories 127,265 127,496 Prepaid expenses and other current assets 42,075 39,770 Total current assets 340,660 346,707 Property and equipment, net 49,023 49,249 Intangible assets, net 16,157 16,614 Goodwill 15,454 15,575 Operating lease right-of-use assets 42,387 45,364 Finance lease right-of-use assets 7,537 7,774 Long-term deferred income tax assets 2,511 2,787 Other assets 39,387 37,658 Total assets $513,116 $521,728 LIABILITIES, REDEEMABLE NON-CONTROLLING INTEREST AND EQUITY Current liabilities: Current portion of long-term debt, net of deferred financing costs $3,944 $3,944 Current operating lease liabilities 10,939 11,583 Accounts payable 39,397 41,017 Accrued and other liabilities 49,113 46,656 Customer deposits and deferred revenue 20,020 17,423 Total current liabilities 123,413 120,623 Long-term debt, net of deferred financing costs 86,786 86,394 Long-term operating lease liabilities 42,481 45,420 Long-term deferred income tax liabilities 3,009 2,740 Other liabilities 23,083 24,000 Total liabilities 278,772 279,177 Commitments and contingencies Redeemable non-controlling interest — 2,193 Stockholders’ equity: Preferred stock, 5,000 shares authorized; $0.001 par value; no shares issued and outstanding as of March 31, 2026 and December 31, 2025 — — Common stock, $0.001 par value, authorized 220,000 shares; shares issued 146,057 and 145,581 as of March 31, 2026 and December 31, 2025, respectively 146 146 Additional paid-in capital 1,622,692 1,620,399 Accumulated deficit (1,336,784) (1,332,360)Accumulated other comprehensive loss (51,710) (47,827)Total stockholders’ equity 234,344 240,358 Total liabilities, redeemable non-controlling interest and stockholders’ equity $513,116 $521,728 3D SYSTEMS CORPORATION
Condensed Consolidated Statements of Operations
(Unaudited)
Three Months Ended(in thousands, except per share amounts) March 31, 2026 March 31, 2025Revenue: Products $57,768 $54,723 Services 37,770 39,817 Total revenue 95,538 94,540 Cost of sales: Products 36,087 37,365 Services 25,108 24,486 Total cost of sales 61,195 61,851 Gross profit 34,343 32,689 Operating expenses: Selling, general and administrative 31,348 49,769 Research and development 9,635 19,683 Total operating expenses 40,983 69,452 Loss from operations (6,640) (36,763)Non-operating income (loss): Foreign exchange gain, net 2,638 1,139 Interest income 584 953 Interest expense (2,164) (581)Other income (loss), net 3,528 (160) Total non-operating income 4,586 1,351 Net loss before income taxes (2,054) (35,412)Provision for income taxes (1,483) (671)Loss on equity method investments, net of income taxes (1,046) (903)Net loss before redeemable non-controlling interest (4,583) (36,986)Less: net loss attributable to redeemable non-controlling interest (159) — Net loss attributable to 3D Systems Corporation $(4,424) $(36,986) Net loss per common share: Basic $(0.03) $(0.28)Diluted $(0.03) $(0.28) Weighted average shares outstanding: Basic 143,261 132,462 Diluted 143,261 132,462 3D SYSTEMS CORPORATION
Condensed Consolidated Statements of Cash Flows
(Unaudited)
Three Months Ended(in thousands) March 31, 2026 March 31, 2025OPERATING ACTIVITIES Net loss before redeemable non-controlling interest $(4,583) $(36,986)Adjustments to reconcile net loss to net cash used in operating activities: Depreciation and amortization 5,132 5,712 Amortization of debt issuance costs 499 316 Stock-based compensation 2,282 4,168 Non-cash operating lease expense 3,022 2,371 Provision for inventory obsolescence 1,431 1,311 Provision for bad debts 473 325 (Gain) loss on the disposition of businesses, property, equipment and other assets (320) 128 Provision for deferred income taxes and reserve adjustments 690 1,652 Gain on disposal of investment (2,576) — Loss on equity method investment, net of taxes 1,046 903 Changes in operating accounts: Accounts receivable (5,645) (1,231) Inventories (2,146) (1,870) Prepaid expenses and other current assets (2,014) (4,078) Accounts payable (2,040) (2,799) Deferred revenue and customer deposits 4,759 5,745 Accrued and other liabilities 109 (4,144)All other operating activities (7,331) (5,309)Net cash used in operating activities (7,212) (33,786)INVESTING ACTIVITIES Purchases of property and equipment (2,058) (2,795)Proceeds from sale of assets and businesses, net of cash sold 100 — Acquisitions and other investments, net of cash acquired — (550)Other investing activities (202) (67)Net cash used in investing activities (2,160) (3,412)FINANCING ACTIVITIES Purchase of non-controlling interest (498) — Taxes paid related to net-share settlement of equity awards (11) (285)Other financing activities (414) (364)Net cash used in financing activities (923) (649)Effect of exchange rate changes on cash, cash equivalents and restricted cash (289) 1,178 Net decrease in cash, cash equivalents and restricted cash (10,584) (36,669)Cash, cash equivalents and restricted cash at the beginning of the year 97,100 172,883 Cash, cash equivalents and restricted cash at the end of the period $86,516 $136,214 3D SYSTEMS CORPORATION
Segment Information
(Unaudited)
Three Months Ended (in millions) March 31, 2026 March 31, 2025 Revenue: Healthcare Solutions $50.1 $41.3 Industrial Solutions 45.4 53.2 Total $95.5 $94.5 3D SYSTEMS CORPORATION
Reconciliations of GAAP to Non-GAAP Measures
Presentation of Information in this Press Release
3D Systems reports its financial results in accordance with GAAP. Management also reviews and reports certain non-GAAP measures, including: non-GAAP gross profit, non-GAAP gross profit margin, non-GAAP diluted income (loss) per share, non-GAAP operating expense and Adjusted EBITDA. These non-GAAP measures exclude certain items that management does not view as part of 3D Systems’ core results as they may be highly variable, may be unusual or infrequent, are difficult to predict and can distort underlying business trends and results. Management believes that the non-GAAP measures provide useful additional insight into underlying business trends and results and provide meaningful information regarding the comparison of period-over-period results. Additionally, management uses the non-GAAP measures for planning, forecasting and evaluating business and financial performance, including allocating resources and evaluating results relative to employee compensation targets. 3D Systems’ non-GAAP measures are not calculated in accordance with or as required by GAAP and may not be calculated in the same manner as similarly titled measures used by other companies. These non-GAAP measures should thus be considered as supplemental in nature and not considered in isolation or as a substitute for the related financial information prepared in accordance with GAAP.
To calculate the non-GAAP measures, 3D Systems excludes the impact of the following items:
amortization of intangible assets, a non-cash expense, as 3D Systems’ intangible assets were primarily acquired in connection with business combinations;costs incurred in connection with acquisitions and divestitures, such as legal, consulting and advisory fees;stock-based compensation expenses, a non-cash expense;charges related to restructuring and cost optimization plans, impairment charges, including goodwill, and divestiture gains or losses;the impact of software divestitures, which were previously included in our Industrial Solutions segment, for pre-divestiture periods in 2025; andcosts, including legal fees, related to significant or unusual litigation matters. Amortization of intangibles and acquisition and divestiture-related costs are excluded from non-GAAP measures as the timing and magnitude of business combination transactions are not predictable, can vary significantly from period to period and the purchase price allocated to amortizable intangible assets and the related amortization period are unique to each acquisition. Amortization of intangible assets will recur in future periods until such intangible assets have been fully amortized. While intangible assets contribute to the company’s revenue generation, the amortization of intangible assets does not directly relate to the sale of the company’s products or services. Additionally, intangible assets amortization expense typically fluctuates based on the size and timing of the company’s acquisition activity. Accordingly, the company believes excluding the amortization of intangible assets enhances the company’s and investors’ ability to compare the company’s past financial performance with its current performance and to analyze underlying business performance and trends. Although stock-based compensation is a key incentive offered to certain of our employees, the expense is non-cash in nature, and we continue to evaluate our business performance excluding stock-based compensation; therefore, it is excluded from non-GAAP measures. Stock-based compensation expenses will recur in future periods. Charges related to restructuring and cost optimization plans, impairment charges, including goodwill, divestiture gains or losses, and the costs, including legal fees, related to significant or unusual litigation matters are excluded from non-GAAP measures as the frequency and magnitude of these activities may vary widely from period to period. Additionally, impairment charges, including goodwill, are non-cash. Furthermore, the company believes the costs, including legal fees, related to significant or unusual litigation matters are not indicative of our core business' operations. Finally, 3D Systems excludes contingent consideration recorded as compensation expense related to the 2021 Volumetric acquisition from non-GAAP measures as management evaluates financial performance excluding this expense, which is viewed by management as similar to acquisition consideration.
The matters discussed above are tax effected, as applicable, in calculating non-GAAP diluted income (loss) per share.
Adjusted EBITDA, defined as net income, plus income tax (provision) benefit, interest and other income (expense), net, stock-based compensation expense, amortization of intangible assets, depreciation expense, and other non-GAAP adjustments, all as described above, is used by management to evaluate performance and helps measure financial performance period-over-period.
Furthermore, in this press release, 3D Systems reports certain non-GAAP financial measures further adjusted to remove the operating activity related to (i) Geomagic, which the Company divested on April 1, 2025, for $119.4 million in cash, and (ii) 3DXpert and Oqton, which the Company divested on October 31, 2025, for $3.3 million in cash plus a revenue-based royalty of up to $12.9 million (together with Geomagic, the "Software Divestitures"), for periods non-comparable on a year over year basis. The Company believes excluding non-comparable periods allows it to include the operating activity related to Software Divestitures only to the extent that results are comparable year over year.
A reconciliation of GAAP to non-GAAP financial measures is provided in the accompanying schedules.
Certain columns may not add due to the use of rounded numbers. Percentages presented are calculated from the underlying numbers in thousands.
3D Systems does not provide forward-looking guidance for certain measures on a GAAP basis. The Company is unable to provide a quantitative reconciliation of forward-looking Adjusted EBITDA to the most directly comparable forward-looking GAAP measure without unreasonable effort because certain items, including litigation costs, acquisition expenses, stock-based compensation expense, intangible assets amortization expense, restructuring expenses, and goodwill impairment charges, are difficult to predict and estimate. These items are inherently uncertain and depend on various factors, many of which are beyond the Company’s control, and as such, any associated estimate and its impact on GAAP performance could vary materially.
Adjusted Revenue (Unaudited)
Three Months Ended(in millions) March 31, 2026 March 31, 2025Revenue $95.5 $94.5 Software divestitures — (8.5)Adjusted revenue (Non-GAAP) $95.5 $86.0 Non-GAAP Gross Profit and Gross Profit Margin (Unaudited)
Three Months Ended(in millions) March 31, 2026 March 31, 2025 Gross Profit Gross Profit Margin(1) Gross Profit Gross Profit Margin(1)Gross profit (GAAP) $34.3 35.9% $32.7 34.6%Amortization expense 0.2 0.2% 0.2 0.2%Restructuring expense — —% 0.2 0.2%Asset impairment charges (0.1) (0.1)% — —%Gross profit (Non-GAAP) $34.4 36.1% $33.1 35.0%Software divestitures — —% (7.2) (4.9)%Gross profit excluding software divestitures (Non-GAAP) $34.4 36.1% $25.9 30.1% (1) Calculated as non-GAAP gross profit as a percentage of total revenue.
Non-GAAP Operating Expense (Unaudited)
Three Months Ended(in millions) March 31, 2026 March 31, 2025Operating expense (GAAP) $41.0 $69.5 Amortization expense (0.7) (0.8)Stock-based compensation expense (2.3) (4.2)Acquisition and divestiture-related expense (0.2) (0.9)Legal and other expense (1.1) (1.1)Restructuring expense (0.2) (0.8)Asset impairment charges 0.1 — Non-GAAP operating expense $36.6 $61.6 Software divestitures — (4.9)Non-GAAP operating expenses excluding software divestitures $— $56.7 Net Loss Attributable to 3D Systems Corporation to Adjusted EBITDA (Unaudited)
Three Months Ended(in millions) March 31, 2026 March 31, 2025Net loss attributable to 3D Systems Corporation (GAAP) $(4.4) $(37.0)Interest expense (income), net 1.6 (0.4)Provision for income taxes 1.5 0.7 Depreciation expense 4.2 4.7 Amortization expense 0.9 1.0 EBITDA (Non-GAAP) 3.7 (31.0)Stock-based compensation expense 2.3 4.2 Acquisition and divestiture-related expense 0.2 0.9 Legal and other expense 1.1 1.1 Restructuring expense 0.2 1.0 Net loss attributable to redeemable non-controlling interest (0.2) — Loss on equity method investment, net of tax 1.0 0.9 Gain on disposal of investment (2.6) — Other non-operating income (3.8) (1.0)Adjusted EBITDA (Non-GAAP) $2.1 $(23.9)Software divestitures — (2.2)Adjusted EBITDA (Non-GAAP) excluding software divestitures $2.1 $(26.1) Diluted Loss per Share (Unaudited)
Three Months Ended(in dollars) March 31, 2026 March 31, 2025Diluted loss per share (GAAP) $(0.03) $(0.28)Amortization expense 0.01 0.01 Stock-based compensation expense 0.02 0.03 Acquisition and divestiture-related expense — 0.01 Legal and other expense 0.01 0.01 Restructuring expense — 0.01 Gain on disposal of investment (0.02) — Loss on equity method investment and other 0.01 0.01 Non-GAAP diluted loss per share $(0.01) $(0.21)
3D Systems (DDD - Free Report) came out with a quarterly loss of $0.01 per share versus the Zacks Consensus Estimate of a loss of $0.09. This compares to a loss of $0.21 per share a year ago. These figures are adjusted for non-recurring items.
This quarterly report represents an earnings surprise of +88.89%. A quarter ago, it was expected that this maker of 3D printers would post a loss of $0.11 per share when it actually produced a loss of $0.13, delivering a surprise of -18.18%.
Over the last four quarters, the company has surpassed consensus EPS estimates three times.
3D Systems, which belongs to the Zacks Commercial Printing industry, posted revenues of $95.54 million for the quarter ended March 2026, surpassing the Zacks Consensus Estimate by 3.65%. This compares to year-ago revenues of $94.54 million. The company has topped consensus revenue estimates two times over the last four quarters.
The sustainability of the stock's immediate price movement based on the recently-released numbers and future earnings expectations will mostly depend on management's commentary on the earnings call.
3D Systems shares have added about 39.6% since the beginning of the year versus the S&P 500's gain of 8.1%.
What's Next for 3D Systems?While 3D Systems has outperformed the market so far this year, the question that comes to investors' minds is: what's next for the stock?
There are no easy answers to this key question, but one reliable measure that can help investors address this is the company's earnings outlook. Not only does this include current consensus earnings expectations for the coming quarter(s), but also how these expectations have changed lately.
Empirical research shows a strong correlation between near-term stock movements and trends in earnings estimate revisions. Investors can track such revisions by themselves or rely on a tried-and-tested rating tool like the Zacks Rank, which has an impressive track record of harnessing the power of earnings estimate revisions.
Ahead of this earnings release, the estimate revisions trend for 3D Systems was unfavorable. While the magnitude and direction of estimate revisions could change following the company's just-released earnings report, the current status translates into a Zacks Rank #4 (Sell) for the stock. So, the shares are expected to underperform the market in the near future. You can see the complete list of today's Zacks #1 Rank (Strong Buy) stocks here.
It will be interesting to see how estimates for the coming quarters and the current fiscal year change in the days ahead. The current consensus EPS estimate is -$0.09 on $94.95 million in revenues for the coming quarter and -$0.30 on $388.48 million in revenues for the current fiscal year.
Investors should be mindful of the fact that the outlook for the industry can have a material impact on the performance of the stock as well. In terms of the Zacks Industry Rank, Commercial Printing is currently in the bottom 13% of the 250 plus Zacks industries. Our research shows that the top 50% of the Zacks-ranked industries outperform the bottom 50% by a factor of more than 2 to 1.
One other stock from the same industry, Research Solutions Inc. (RSSS - Free Report) , is yet to report results for the quarter ended March 2026. The results are expected to be released on May 14.
This company is expected to post quarterly earnings of $0.04 per share in its upcoming report, which represents a year-over-year change of +33.3%. The consensus EPS estimate for the quarter has remained unchanged over the last 30 days.
Research Solutions Inc.'s revenues are expected to be $12.48 million, down 1.4% from the year-ago quarter.
Key Takeaways DDD posted a Q1 non-GAAP loss of 1 cent per share, beating estimates as revenue rose 1% year over year. 3D Systems Healthcare revenue jumped 21%, driven by strong Dental and MedTech demand growth. DDD expects Q2 revenues of $93M-$95M and adjusted EBITDA loss between $2M and $4M. 3D Systems (DDD - Free Report) posted a first-quarter 2026 non-GAAP loss of 1 cent per share, narrower than the reported loss of 21 cents per share in the year-ago quarter. The figure beat the Zacks Consensus Estimate by 88.89%.
Revenues were $95.5 million, up 1% year over year or 11% excluding the impact of divestitures and surpassed the Zacks Consensus Estimate by 3.65%. Strength in Healthcare demand stood out, supported by double-digit growth across Dental, Med Tech and Aerospace and Defense.
Product revenues increased 5.5% year over year to $57.8 million in the first quarter, contributing 60.5% to total revenues. Services revenues, which accounted for 39.5% of total revenues, decreased 5.1% year over year to $37.8 million.
DDD’s Q1 Segmental DetailsThe company operates through two key segments — Healthcare Solutions and Industrial Solutions — tailored to the diverse industries it serves. Healthcare Solutions focuses on dental, medical devices, personalized health services, and regenerative medicine, whereas Industrial Solutions caters to aerospace, defense, transportation and general manufacturing.
Healthcare Solutions remained the clear driver of the quarter. Segment revenue increased about 21% year over year to $50.1 million, reflecting broad-based momentum across key medical and dental applications. Dental and MedTech increased approximately 20% year over year.
Industrial Solutions, however, continued to face pressure. Segment revenue decreased roughly 15% year over year to $45.4 million, though the company noted that adjusting for 2025 divestitures, Industrial Solutions revenue increased 2% from the prior-year period.
DDD Q1 Operating DetailsIn the first quarter of 2026, DDD’s non-GAAP gross profit increased 3.9% year over year to $34.4 million. The non-GAAP gross profit margin expanded 100 basis points to 36%, aided by higher volumes and a more favorable revenue mix.
Adjusted EBITDA was $2.1 million compared with an adjusted EBITDA loss of $23.9 million a year ago, underscoring the benefits of improved sales levels and continued execution against expense initiatives.
Operating expenses also came down sharply. Total operating expense on a non-GAAP basis declined 40.6% year over year to $36.6 million, reflecting the impact of earlier cost reduction actions.
DDD’s Liquidity Declined as Cash Flow Stayed NegativeAs of March 31, 2026, total cash was $86.5 million, including $85.1 million of cash and cash equivalents and $1.4 million of restricted cash.
As of March 31, 2026, DDD had a total debt of $90.7 million. The balance sheet also reflects $3.9 million of debt scheduled to mature in the fourth quarter of 2026, with $92.0 million maturing in 2030.
3D Systems’ Q2 View Implies Stable Revenue, EBITDA PullbackManagement expects second-quarter 2026 revenues in the range of $93 million to $95 million. The outlook implies roughly steady demand levels as the company works to build on the quarter’s top-line momentum in priority markets.
On profitability, adjusted EBITDA is expected to be between a loss of $4 million and $2 million in the second quarter.
DDD Zacks Rank & Stocks to ConsiderDDD currently carries a Zacks Rank #4 (Sell).
Some better-ranked stocks in the broader Zacks Industrial Products sector include RBC Bearings (RBC - Free Report) , Enersys (ENS - Free Report) , and EquipmentShare.com (EQPT - Free Report) . Each stock currently carries a Zacks Rank of 2 (Buy). You can see the complete list of today’s Zacks #1 Rank (Strong Buy) stocks here.
Shares of RBC Bearings have gained 36.8% in the year-to-date period. RBC Bearings is set to report fourth-quarter fiscal 2026 results on May 15.
Enersys shares have gained 61.4% in the year-to-date period. Enersys is scheduled to report fourth-quarter fiscal 2026 results on May 20.
EquipmentShare.com shares have lost 28.5% in the year-to-date period. EquipmentShare.com is set to report its first-quarter 2026 results on May 13.
The Progressive Corporation $PGR Shares Sold by Woodley Farra Manion Portfolio Management Inc.Woodley Farra Manion Portfolio Management Inc. lowered its stake in The Progressive Corporation (NYSE:PGR - Free Report) by 2.8% in the 4th quarter, according to its most recent Form 13F filing with the Securities & Exchange Commission. The firm owned 305,408 shares of the insurance provider's
NYSE:PGR
Read The Progressive Corporation $PGR Shares Sold by Woodley Farra Manion Portfolio Management Inc.
2 hours ago
Woodley Farra Manion Portfolio Management Inc. Sells 16,282 Shares of The Walt Disney Company $DISMarketBeat
Woodley Farra Manion Portfolio Management Inc. cut its holdings in shares of The Walt Disney Company (NYSE:DIS - Free Report) by 2.2% during the fourth quarter, according to its most recent disclosure with the Securities and Exchange Commission. The fund owned 708,928 shares of the entertainment gi
NYSE:DIS
Read Woodley Farra Manion Portfolio Management Inc. Sells 16,282 Shares of The Walt Disney Company $DIS
2 hours ago
Morgan Stanley $MS Stock Position Cut by Woodley Farra Manion Portfolio Management Inc.MarketBeat
Woodley Farra Manion Portfolio Management Inc. cut its holdings in shares of Morgan Stanley (NYSE:MS - Free Report) by 2.7% during the fourth quarter, according to its most recent Form 13F filing with the Securities and Exchange Commission (SEC). The firm owned 556,628 shares of the financial servi
NYSE:MS
Read Morgan Stanley $MS Stock Position Cut by Woodley Farra Manion Portfolio Management Inc.
2 hours ago
Xponance LLC Grows Position in Texas Instruments Incorporated $TXNMarketBeat
Xponance LLC grew its position in shares of Texas Instruments Incorporated (NASDAQ:TXN - Free Report) by 7.7% during the 4th quarter, according to its most recent 13F filing with the Securities and Exchange Commission. The fund owned 177,875 shares of the semiconductor company's stock after purchas
NASDAQ:TXN
Read Xponance LLC Grows Position in Texas Instruments Incorporated $TXN
2 hours ago
Xponance LLC Acquires 152,351 Shares of AT&T Inc. $TMarketBeat
Xponance LLC increased its holdings in shares of AT&T Inc. (NYSE:T - Free Report) by 14.4% in the fourth quarter, according to the company in its most recent filing with the SEC. The institutional investor owned 1,213,315 shares of the technology company's stock after purchasing an additional 152,
NYSE:T
Read Xponance LLC Acquires 152,351 Shares of AT&T Inc. $T
From a technical perspective, 3D Systems Corporation (DDD - Free Report) is looking like an interesting pick, as it just reached a key level of support. DDD's 50-day simple moving average crossed above its 200-day simple moving average, which is known as a "golden cross" in the trading world.
Considered an important signifier for a bullish breakout, a golden cross is a technical chart pattern that's formed when a stock's short-term moving average breaks above a longer-term moving average; the most common crossover involves the 50-day and the 200-day, since bigger time periods tend to form stronger breakouts.
There are three stages to a golden cross. First, there must be a downtrend in a stock's price that eventually bottoms out. Then, the stock's shorter moving average crosses over its longer moving average, triggering a positive trend reversal. The third stage is when a stock continues the upward momentum to higher prices.
This kind of chart pattern is the opposite of a death cross, which is a technical event that suggests future bearish price movement.
DDD has rallied 63.9% over the past four weeks, and the company is a #2 (Buy) on the Zacks Rank at the moment. This combination indicates DDD could be poised for a breakout.
The bullish case solidifies once investors consider DDD's positive earnings outlook. For the current quarter, no earnings estimate has been cut compared to 2 revisions higher in the past 60 days. The Zacks Consensus Estimate has increased too.
Investors should think about putting DDDon their watchlist given the ultra-important technical indicator and positive move in earnings estimates.
Momentum investing revolves around the idea of following a stock's recent trend in either direction. In "long context," investors will be essentially be "buying high, but hoping to sell even higher." With this methodology, taking advantage of trends in a stock's price is key; once a stock establishes a course, it is more than likely to continue moving that way. The goal is that once a stock heads down a fixed path, it will lead to timely and profitable trades.
While many investors like to look for momentum in stocks, this can be very tough to define. There is a lot of debate surrounding which metrics are the best to focus on and which are poor quality indicators of future performance. The Zacks Momentum Style Score, part of the Zacks Style Scores, helps address this issue for us.
Below, we take a look at 3D Systems (DDD - Free Report) , a company that currently holds a Momentum Style Score of A. We also talk about price change and earnings estimate revisions, two of the main aspects of the Momentum Style Score.
It's also important to note that Style Scores work as a complement to the Zacks Rank, our stock rating system that has an impressive track record of outperformance. 3D Systems currently has a Zacks Rank of #2 (Buy). Our research shows that stocks rated Zacks Rank #1 (Strong Buy) and #2 (Buy) and Style Scores of "A or B" outperform the market over the following one-month period.
You can see the current list of Zacks #1 Rank Stocks here >>>
Set to Beat the Market?Let's discuss some of the components of the Momentum Style Score for DDD that show why this maker of 3D printers shows promise as a solid momentum pick.
Looking at a stock's short-term price activity is a great way to gauge if it has momentum, since this can reflect both the current interest in a stock and if buyers or sellers have the upper hand at the moment. It is also useful to compare a security to its industry, as this can help investors pinpoint the top companies in a particular area.
For DDD, shares are up 4.3% over the past week while the Zacks Commercial Printing industry is flat over the same time period. Shares are looking quite well from a longer time frame too, as the monthly price change of 63.89% compares favorably with the industry's 2.43% performance as well.
While any stock can see a spike in price, it takes a real winner to consistently outperform the market. Over the past quarter, shares of 3D Systems have risen 69.38%, and are up 125.48% in the last year. On the other hand, the S&P 500 has only moved 9.66% and 28.33%, respectively.
Investors should also pay attention to DDD's average 20-day trading volume. Volume is a useful item in many ways, and the 20-day average establishes a good price-to-volume baseline; a rising stock with above average volume is generally a bullish sign, whereas a declining stock on above average volume is typically bearish. DDD is currently averaging 5,066,604 shares for the last 20 days.
Earnings OutlookThe Zacks Momentum Style Score encompasses many things, including estimate revisions and a stock's price movement. Investors should note that earnings estimates are also significant to the Zacks Rank, and a nice path here can be promising. We have recently been noticing this with DDD.
Over the past two months, 2 earnings estimates moved higher compared to none lower for the full year. These revisions helped boost DDD's consensus estimate, increasing from -$0.30 to -$0.18 in the past 60 days. Looking at the next fiscal year, 1 estimate has moved upwards while there have been no downward revisions in the same time period.
Bottom LineTaking into account all of these elements, it should come as no surprise that DDD is a #2 (Buy) stock with a Momentum Score of A. If you've been searching for a fresh pick that's set to rise in the near-term, make sure to keep 3D Systems on your short list.
ROCK HILL, S.C., June 03, 2026 (GLOBE NEWSWIRE) -- Today, 3D Systems Corporation (NYSE: DDD) (“3D Systems”) announced the commencement of an underwritten public offering of $40 million of its common stock. All of the shares of common stock are to be offered by 3D Systems. In addition, 3D Systems intends to grant the underwriters an option to purchase an additional amount of shares of common stock equal to up to 15% of the common stock sold in the public offering at the public offering price, less underwriting discounts and commissions. The offering is subject to market conditions and other factors, and there can be no assurance as to whether or when the offering may be completed, or as to the actual size or terms of the offering.
Needham & Company and Craig-Hallum are acting as joint book-running managers for the proposed offering.
A registration statement relating to these securities was filed with the U.S. Securities and Exchange Commission (the ”SEC”) and declared effective on May 27, 2026. Copies of the registration statement can be accessed through the SEC’s website free of charge at www.sec.gov. The offering will be made only by means of a prospectus supplement and an accompanying prospectus. A preliminary prospectus supplement and the accompanying prospectus related to the offering will be filed with the SEC and will be available free of charge by visiting EDGAR on the SEC’s website at www.sec.gov. Copies of the preliminary prospectus supplement and the accompanying prospectus can also be obtained, when available, free of charge from either of the joint book-running managers for the offering: Needham & Company, LLC, 250 Park Avenue, 10th Floor, New York, NY 10177, Attn: Prospectus Department, [email protected] or by telephone at (800) 903-3268; or Craig-Hallum Capital Group LLC, Attention: Equity Capital Markets, 323 N Washington Ave., Suite 300, Minneapolis, MN 55401, by telephone at (612) 334-6300 or by email at [email protected]. The final terms of the offering will be disclosed in a final prospectus supplement to be filed with the SEC.
This press release does not constitute an offer to sell or the solicitation of an offer to buy securities, and shall not constitute an offer, solicitation or sale in any jurisdiction in which such offer, solicitation or sale would be unlawful prior to registration or qualification under the securities laws of that jurisdiction.
About 3D Systems
Nearly 40 years ago, Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future.
Forward-Looking Statements
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including statements regarding 3D Systems’ expectations regarding the completion of the proposed offering. Forward-looking statements involve known and unknown risks and uncertainties and no assurance can be given that the proposed offering discussed above will be consummated on the terms described or at all. Completion of the proposed offering and the terms thereof are subject to numerous factors, many of which are beyond the control of 3D Systems, including market conditions, failure of customary closing conditions and the risk factors and other matters set forth in its periodic filings with the SEC. The forward-looking statements included in this press release are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.
ROCK HILL, S.C., June 03, 2026 (GLOBE NEWSWIRE) -- Today, 3D Systems Corporation (NYSE: DDD) (“3D Systems”) announced the pricing of its previously announced upsized underwritten public offering of 16,393,443 shares of common stock at a public offering price of $3.05 per share for total gross proceeds of approximately $50 million. All of the shares of common stock are being offered by 3D Systems. The offering is expected to close on June 5, 2026, subject to customary closing conditions. In addition, 3D Systems has granted the underwriters a 30-day option to purchase up to an additional 2,459,016 shares of common stock at the public offering price, less underwriting discounts and commissions.
Needham & Company and Craig-Hallum are acting as joint book-running managers for the offering.
A registration statement relating to these securities was filed with the U.S. Securities and Exchange Commission (the ”SEC”) and declared effective on May 27, 2026. Copies of the registration statement can be accessed through the SEC’s website free of charge at www.sec.gov. A preliminary prospectus supplement and an accompanying prospectus relating to and describing the terms of the offering were filed with the SEC and are available free of charge by visiting EDGAR on the SEC’s website at www.sec.gov. When available, copies of the final prospectus supplement and the accompanying prospectus related to the offering can be accessed through the SEC’s website free of charge at www.sec.gov or obtained free of charge from either of the joint book-running managers for the offering: Needham & Company, LLC, 250 Park Avenue, 10th Floor, New York, NY 10177, Attn: Prospectus Department, [email protected] or by telephone at (800) 903-3268; or Craig-Hallum Capital Group LLC, Attention: Equity Capital Markets, 323 N Washington Ave., Suite 300, Minneapolis, MN 55401, by telephone at (612) 334-6300 or by email at [email protected].
This press release does not constitute an offer to sell or the solicitation of an offer to buy securities, and shall not constitute an offer, solicitation or sale in any jurisdiction in which such offer, solicitation or sale would be unlawful prior to registration or qualification under the securities laws of that jurisdiction.
About 3D Systems
Nearly 40 years ago, Chuck Hull’s curiosity and desire to improve the way products were designed and manufactured gave birth to 3D printing, 3D Systems, and the additive manufacturing industry. Since then, that same spark continues to ignite the 3D Systems team as we work side-by-side with our customers to change the way industries innovate. As a full-service solutions partner, we deliver industry-leading 3D printing technologies, materials and software to high-value markets such as medical and dental; aerospace, space and defense; transportation and motorsports; AI infrastructure; and durable goods. Each application-specific solution is powered by the expertise and passion of our employees who endeavor to achieve our shared goal of Transforming Manufacturing for a Better Future.
Forward-Looking Statements
Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, including statements regarding 3D Systems’ expectations regarding the completion of the offering. Forward-looking statements involve known and unknown risks and uncertainties and no assurance can be given that the offering will be consummated on the terms described or at all. Completion of the offering and the terms thereof are subject to numerous factors, many of which are beyond the control of 3D Systems, including market conditions, failure of customary closing conditions and the risk factors and other matters set forth in its periodic filings with the SEC. The forward-looking statements included in this press release are made only as of the date of the statement. 3D Systems undertakes no obligation to update or review any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise.
It has been about a month since the last earnings report for 3D Systems (DDD - Free Report) . Shares have lost about 5.1% in that time frame, underperforming the S&P 500.
But investors have to be wondering, will the recent negative trend continue leading up to its next earnings release, or is 3D Systems due for a breakout? Before we dive into how investors and analysts have reacted as of late, let's take a quick look at the most recent earnings report in order to get a better handle on the important drivers.
3D Systems Q1 Earnings Beat Estimates, Revenues Increase Y/Y3D Systems posted a first-quarter 2026 non-GAAP loss of 1 cent per share, narrower than the reported loss of 21 cents per share in the year-ago quarter. The figure beat the Zacks Consensus Estimate by 88.89%.
Revenues were $95.5 million, up 1% year over year or 11% excluding the impact of divestitures, and surpassed the Zacks Consensus Estimate by 3.65%. Strength in Healthcare demand stood out, supported by double-digit growth across Dental, Med Tech and Aerospace and Defense.
Product revenues increased 5.5% year over year to $57.8 million in the first quarter, contributing 60.5% to total revenues. Services revenues, which accounted for 39.5% of total revenues, decreased 5.1% year over year to $37.8 million.
DDD’s Q1 Segmental DetailsThe company operates through two key segments — Healthcare Solutions and Industrial Solutions — tailored to the diverse industries it serves. Healthcare Solutions focuses on dental, medical devices, personalized health services, and regenerative medicine, whereas Industrial Solutions caters to aerospace, defense, transportation, and general manufacturing.
Healthcare Solutions remained the clear driver of the quarter. Segment revenue increased about 21% year over year to $50.1 million, reflecting broad-based momentum across key medical and dental applications. Dental and MedTech increased approximately 20% year over year.
Industrial Solutions, however, continued to face pressure. Segment revenue decreased roughly 15% year over year to $45.4 million, though the company noted that adjusting for 2025 divestitures, Industrial Solutions revenue increased 2% from the prior-year period.
DDD Q1 Operating DetailsIn the first quarter of 2026, DDD’s non-GAAP gross profit increased 3.9% year over year to $34.4 million. The non-GAAP gross profit margin expanded 100 basis points to 36%, aided by higher volumes and a more favorable revenue mix.
Adjusted EBITDA was $2.1 million compared with an adjusted EBITDA loss of $23.9 million a year ago, underscoring the benefits of improved sales levels and continued execution against expense initiatives.
Operating expenses also came down sharply. Total operating expense on a non-GAAP basis declined 40.6% year over year to $36.6 million, reflecting the impact of earlier cost reduction actions.
DDD’s Liquidity Declined as Cash Flow Stayed NegativeAs of March 31, 2026, total cash was $86.5 million, including $85.1 million of cash and cash equivalents and $1.4 million of restricted cash.
As of March 31, 2026, DDD had a total debt of $90.7 million. The balance sheet also reflects $3.9 million of debt scheduled to mature in the fourth quarter of 2026, with $92.0 million maturing in 2030.
3D Systems’ Q2 View Implies Stable Revenue, EBITDA PullbackManagement expects second-quarter 2026 revenues in the range of $93 million to $95 million. The outlook implies roughly steady demand levels as the company works to build on the quarter’s top-line momentum in priority markets.
On profitability, adjusted EBITDA is expected to be between a loss of $4 million and $2 million in the second quarter.
How Have Estimates Been Moving Since Then?In the past month, investors have witnessed a flat trend in fresh estimates.
The consensus estimate has shifted 11.11% due to these changes.
VGM ScoresAt this time, 3D Systems has a great Growth Score of A, a score with the same score on the momentum front. However, the stock was allocated a grade of D on the value side, putting it in the bottom 40% for this investment strategy.
Overall, the stock has an aggregate VGM Score of A. If you aren't focused on one strategy, this score is the one you should be interested in.
Outlook 3D Systems has a Zacks Rank #3 (Hold). We expect an in-line return from the stock in the next few months.
Performance of an Industry Player3D Systems is part of the Zacks Commercial Printing industry. Over the past month, Stratasys (SSYS - Free Report) , a stock from the same industry, has gained 0.8%. The company reported its results for the quarter ended March 2026 more than a month ago.
Stratasys reported revenues of $132.7 million in the last reported quarter, representing a year-over-year change of -2.5%. EPS of -$0.01 for the same period compares with $0.04 a year ago.
For the current quarter, Stratasys is expected to post earnings of $0.02 per share, indicating a change of -33.3% from the year-ago quarter. The Zacks Consensus Estimate has changed -5.3% over the last 30 days.
The overall direction and magnitude of estimate revisions translate into a Zacks Rank #4 (Sell) for Stratasys. Also, the stock has a VGM Score of C.
